All Categories
History
Response Rate
100.0%
Response Time
59.6hours
Product
Magnetic gear speed sensor FDP seriesHandling Company
Coco Research Co., Ltd.Categories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Compatible module | Mass | Withstand voltage | Shockproof | Vibration resistance | Insulation resistance | Magnet polarity | Current consumption | Detection distance | Detected object | Detection means | Minimum detectable tooth width | Response frequency range | External dimensions | LED for operation confirmation | Output current | Output voltage | Output circuit | Output mode | Protection class | Supply voltage range | Operating temperature range | Cable | Case material | Accessories |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FDP10-A37 |
Available upon quote |
M0.5 or more |
Approximately 90g |
AC500V 50/60Hz 1min Between all cables and case |
JIS C 60068-2-32 (Falling floor: concrete, falling height: 1m, 2 times each) |
JIS C 60068-2-6 (Frequency range: 10~55Hz, double amplitude: 1.5mm, sweep time: 5 minutes, number of sweeps: 20 times in each direction of X, Y, Z, total 60 times) |
50MΩ or more (between all cables and case using DC500V megger) |
Tip S pole |
30mA or less |
M0.5 0.1~0.4mm/m1 0.1~1.2mm /m2 0.1~2.6mm |
Material: Magnetic material (SA5C mechanical structural carbon steel (JIS G 4051), etc.) Standard gears and gears with a step of 3 mm or more |
Single Hall element method |
3mm or more |
0Hz~15kHz |
M10×L:37mm (M10 1mm pitch) |
Lights up when approaching |
30mA or less (sink current) |
Output at supply supply voltage |
Semi-open collector (open collector + pull-up) |
Proximity output H |
IP67 |
DC4.5V~25V ripple 10% or less |
-20℃~+70℃ |
2m PVC 3 core shielded cable |
Brass nickel plated |
2 nuts, 1 toothed washer |
|
|
FDP10-A37-J6M (with connector) |
Available upon quote |
M0.5 or more |
Approximately 110g |
AC500V 50/60Hz 1min Between all cables and case |
JIS C 60068-2-32 (Falling floor: concrete, falling height: 1m, 2 times each) |
JIS C 60068-2-6 (Frequency range: 10~55Hz, double amplitude: 1.5mm, sweep time: 5 minutes, number of sweeps: 20 times in each direction of X, Y, Z, total 60 times) |
50MΩ or more (between all cables and case using DC500V megger) |
Tip S pole |
30mA or less |
M0.5 0.1~0.4mm/m1 0.1~1.2mm /m2 0.1~2.6mm |
Material: Magnetic material (SA5C mechanical structural carbon steel (JIS G 4051), etc.) Standard gears and gears with a step of 3 mm or more |
Single Hall element method |
3mm or more |
0Hz~15kHz |
M10×L:37mm (M10 1mm pitch) |
Lights up when approaching |
30mA or less (sink current) |
Output at supply supply voltage |
Semi-open collector (open collector + pull-up) |
Proximity output H |
IP67 |
DC4.5V~25V ripple 10% or less |
-20℃~+70℃ |
2m PVC 3 core shielded cable |
Brass nickel plated |
2 nuts, 1 toothed washer |
|
|
FDP16-A65 |
Available upon quote |
M0.5 or more |
Approximately 155g |
AC500V 50/60Hz 1min Between all cables and case |
JIS C 60068-2-32 (Falling floor: concrete, falling height: 1m, 2 times each) |
JIS C 60068-2-6 (Frequency range: 10~55Hz, double amplitude: 1.5mm, sweep time: 5 minutes, number of sweeps: 20 times in each direction of X, Y, Z, total 60 times) |
50MΩ or more (between all cables and case using DC500V megger) |
Tip S pole |
30mA or less |
M0.5 0.1~0.4mm/m1 0.1~1.2mm /m2 0.1~2.6mm |
Material: Magnetic material (SA5C mechanical structural carbon steel (JIS G 4051), etc.) Standard gears and gears with a step of 3 mm or more |
Single Hall element method |
3mm or more |
0Hz~15kHz |
M16×L:65mm (M16 1mm pitch) |
Lights up when approaching |
30mA or less (sink current) |
Output at supply supply voltage |
Semi-open collector (open collector + pull-up) |
Proximity output H |
IP67 |
DC4.5V~25V ripple 10% or less |
-20℃~+70℃ |
2m PVC 3 core shielded cable |
Brass nickel plated |
2 nuts, 1 toothed washer |
|
|
FDP16-A65-J6M (with connector) |
Available upon quote |
M0.5 or more |
Approximately 175g |
AC500V 50/60Hz 1min Between all cables and case |
JIS C 60068-2-32 (Falling floor: concrete, falling height: 1m, 2 times each) |
JIS C 60068-2-6 (Frequency range: 10~55Hz, double amplitude: 1.5mm, sweep time: 5 minutes, number of sweeps: 20 times in each direction of X, Y, Z, total 60 times) |
50MΩ or more (between all cables and case using DC500V megger) |
Tip S pole |
30mA or less |
M0.5 0.1~0.4mm/m1 0.1~1.2mm /m2 0.1~2.6mm |
Material: Magnetic material (SA5C mechanical structural carbon steel (JIS G 4051), etc.) Standard gears and gears with a step of 3 mm or more |
Single Hall element method |
3mm or more |
0Hz~15kHz |
M16×L:65mm (M16 1mm pitch) |
Lights up when approaching |
30mA or less (sink current) |
Output at supply supply voltage |
Semi-open collector (open collector + pull-up) |
Proximity output H |
IP67 |
DC4.5V~25V ripple 10% or less |
-20℃~+70℃ |
2m PVC 3 core shielded cable |
Brass nickel plated |
2 nuts, 1 toothed washer |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
59.6hrs
