F/V converter for motion/rotation analysis KAZ-Mighty 2
Coco Research Co., Ltd.
About This Product
■Summary
Two Mighty models that excel in motion and rotation analysis. Enables detailed speed comparison of 2ch synchronization. In addition, we paid attention to ease of use.
■Features
・Achieving high resolution
・Speed unevenness during acceleration and deceleration can also be measured
・Supports instantaneous response measurement and averaged response measurement
・Suitable for stacking and panel mounting
・Supports ultra-low speeds
・Equipped with line driver input for noisy environments
・Higher frequency input with hard divider
・New measurements available for FFT preprocessing
・Register 8 measurement conditions
・CAN is also used as a control format
・Dynamic measurement of transfer function
-
Product
F/V converter for motion/rotation analysis KAZ-Mighty 2
-
Handling Company
Coco Research Co., Ltd.
-
Categories
1 Models of F/V converter for motion/rotation analysis KAZ-Mighty 2
| Product Image | Part Number | Price (excluding tax) | Analog calculation section calculation response (at the time of 1 pulse response) | Analog calculation section measurement resolution | Analog calculation section output update time | Display | Display digits | Display update time | Frequency display accuracy | General purpose input signal low pass filter | General-purpose input signal AC coupling frequency characteristics | General-purpose input signal Input pulse | General-purpose input signal Input resistance | General-purpose input signal Input sensitivity | General-purpose input signal Input signal format | General-purpose input signal Input withstand voltage | General-purpose input signal input connector | General-purpose input signal input coupling | Input frequency range | Input port | Input section Input frequency division | Input section Measurable deviation | Input section ⊿F AUTO contents | Line driver input Input withstand voltage | Line driver input input connector | Line driver input input method | Line driver input input pulse | Line driver input input sensitivity | Line driver input sensor power supply | Line driver input terminating resistor | Measurement method | Zero display |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
KAZ-Mighty 2 |
Available upon quote | 1 cycle +6μs or less (90% output response) | 2.08ns (480MHz) | Every input pulse or 20µs~500ms (14 steps) | 16×2 character full dot LCD (with backlight) | 7 digits (polarity, 5 digits of measured value, decimal point) | 0.1s~2.0s (0.1 increments) | 0.001%±1Digit@23℃ | None/100kHz/15kHz/1.5kHz 4 types (3dB, 6dB/oct.) | 35Hz~ (-3dB, 6dB/oct) | 0.2μs or more (both L and H) Trigger direction selectable | 10kΩ when pulled down, 6kΩ when pulled up to +5V | 400/200/100/50mVp-p | Trigger level 0~9.99V and zero cross (AC) | ±80V | BNC, D-sub 15pin (loop through) | DC/AC | 0.23Hz~250kHz (approximately 3MHz when divided) | A/B phase reversible 2ch and single phase 2ch | 1~255 (hardware division) | ±1~±125kHz (Alto mode is the same) |
Center frequency averaging method: AMPLE/MOVING Averaging time: 100ms/200ms/500ms |
±7V | D-sub 15pin | Line receiver (26C32) | 0.2μs or more (both L and H) Trigger direction: Falling | ±200mV | None/330Ω | Periomatic method (periodic measurement method) | Reading zero suppress |
Customers who viewed this product also viewed
Other products of Coco Research Co., Ltd.
View more products of Coco Research Co., Ltd.
About Company Handling This Product
- Japan