All Categories

History

High-performance solar cell controller (PWM charging method controller) SolarAmp mini-SA-MN05-8
High-performance solar cell controller (PWM charging method controller) SolarAmp mini-Denryo Co., Ltd.

High-performance solar cell controller (PWM charging method controller) SolarAmp mini
Denryo Co., Ltd.


About This Product

■World's lowest self-consumption current

For stand-alone solar power generation systems that cannot obtain commercial power, it is important to reduce the power consumption of each device that makes up the system. SolarAmp mini has a self-consumption current of less than 1mA, which promotes long-term system stability. Ideal for systems using small solar cells or systems in areas with short sunlight hours.

■Recovery charging function

It is possible to recharge an over-discharged battery and restore the system. Effective for systems located deep in the mountains and other locations where routine maintenance is difficult. *Batteries that have failed due to reasons other than over-discharge cannot be recovered.

■Vertical design

By making it vertical, you can use space effectively. For example, it fits neatly inside the narrow pole of a street light.

■Night detection function

It can detect sunset and sunrise and control the load. It can be easily used in lighting systems such as street lights and billboards. Selectable timer function

■Constant output at night

It outputs continuously at night, from dusk to sunrise.

■Normal timer

At dusk, after starting output to the load, it will output to the load at the set time. You can choose from 6,8,10,12,14 hours.

■Rate timer

After the output to the load starts at dusk, it outputs to the load at the nighttime rate (%) until sunrise. There is no need to reset the timer even if the night time changes. It can be set in 5 levels: 40, 50, 60, 70, 80%.

■Night detection function OFF (default setting)

This is an operation mode in which the output is always output to the load. This is an operation mode in which the output is always output to the load.

■Unique rate timer function

Unlike conventional night timers, it is equipped with a rate timer function that outputs the output time to the load not in hours but as a percentage of the night. If you use the rate timer function, the output time to the load can be set in percentages, and the output time will change with the change of the season. The rate timer function eliminates the need to reset the timer due to seasonal changes in night time.

■Early lighting start function

Traditional controllers could not turn on the load until the surroundings were completely dark. SolarAmp mini illuminates the load from dusk, allowing you to configure a lighting system useful for traffic safety and crime prevention.

  • Product

    High-performance solar cell controller (PWM charging method controller) SolarAmp mini

Share this product


70+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of High-performance solar cell controller (PWM charging method controller) SolarAmp mini

Image Part Number Price (excluding tax) Weight Reverse connection protection Load current Self-consumption current Humidity Temperature compensation Maximum input voltage Recommended cable size Ground Dimensions (W×H×D) Solar cell input current Operating temperature range Minimum operable voltage Control function Charging voltage Charging method Storage temperature range Low voltage protection Load breaking voltage Low voltage protection Load reconnection voltage Float charging voltage Battery type System voltage
High-performance solar cell controller (PWM charging method controller) SolarAmp mini-Part Number-SA-MN05-8

SA-MN05-8

Available upon quote

105g

Fuse (10A)

8.5A

1mA

5~95%RH (no condensation)

-30mV/℃

25Vdc

#16AWG (1.3mm2) ~#22AWG (0.33mm2)

Negative ground

50×120×20mm

8.5A

-20~+60℃

6Vdc

Charge/discharge

14.1Vdc 14.4Vdc 14.3Vdc 14.0Vdc

3-stage charging (bulk, absorption, float)

-30~+70℃

11.5Vdc±0.2Vdc

12.5Vdc±0.2Vdc

13.7Vdc 13.7Vdc 13.3Vdc 13.7Vdc

Sealed type Non-sealed type AGM type Gel type

12Vdc

Other products of Denryo Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Denryo Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree