All Categories

History

DC-AC inverter TN series TN-3000-TN-3000-124G
DC-AC inverter TN series TN-3000-Denryo Co., Ltd.

DC-AC inverter TN series TN-3000
Denryo Co., Ltd.


About This Product

The TN series is a 3-in-1 DC-AC sine wave inverter with a built-in charger. It has two built-in functions: charging from commercial power and solar battery charging. Simply connect a battery bank, solar cell, or commercial power source to the main unit to optimally charge the battery. The inverter, solar battery charge/discharge controller, and battery charger are combined into one unit, making wiring and management easy. There are two operating modes: a commercial power priority mode that can be used as a UPS, and an inverter priority mode that makes effective use of battery power. The operating mode can be set according to the installation environment and system requirements. When set to commercial power priority mode, when the power from the commercial power source is interrupted, it switches to inverter power like a UPS system and supplies power to the load. When set to inverter priority mode, when used in conjunction with solar cells, the power from the solar cells is used preferentially, effectively saving commercial power.

■Built-in solar battery charging and commercial charging functions

TN series inverter has two functions: solar battery, commercial input charging. Simply connect the main unit to a battery bank, solar cell, or commercial power to optimally charge the battery.

■Selectable operation modes

There are two operating modes: a commercial priority mode that can be used as a UPS, and an inverter priority mode that makes effective use of battery power. The operating mode can be set according to the installation environment and system requirements.

■Reduced switching time

A high-speed automatic switching relay enables instantaneous switching of 10ms. Constantly synchronized operation with commercial power supply avoids load shutdown.

■Sine wave/high surge capacity

Achieves a sine wave with a distortion rate of 3% or less, making it suitable for power supplies for precision equipment such as measuring instruments. The generous design allows you to instantly extract surge power up to twice the rated output.

■Wide operating temperature range

0 to +40℃ outputs 100% of the rating. Up to +60℃, 50% of rated output can be achieved. *Output does not stop automatically. In environments exceeding 40℃, please use the load according to the characteristic diagram of each model.

■Configurable power save mode

By setting the power save mode, you can reduce the inverter's own power consumption when it is in standby mode. Reduces battery consumption.

  • Product

    DC-AC inverter TN series TN-3000

Share this product


260+ people viewing

Last viewed: 10 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of DC-AC inverter TN series TN-3000

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Current consumption when power is OFF Weight Vibration resistance Pressure resistance Insulation resistance Uninterrupted switching time No-load standby power (power save mode) Maximum output power (10 seconds) Dimensions (L×W×H) Rated output power Rated input voltage Frequency (switchable) Operating humidity range Operating temperature range Efficiency (average value) Output voltage (switchable) Output power (3 minutes) Output waveform Cooling Input voltage range Input maximum solar cell open circuit voltage Protection circuit Storage temperature/humidity range Breaker Surge power (30 cycles) PV charging current PV charging voltage AC charging current (average value) AC charging voltage
DC-AC inverter TN series TN-3000-Part Number-TN-3000-124G

TN-3000-124G

Available upon quote

≤1mA

12.9kg

10~500Hz, 3G 10min./1cycle, 60 minutes in each direction of XYZ

Battery Input – AC Output: 3.0kVac, AC Output – Chassis Ground: 1.5kVac

100MΩ/500Vdc/25℃/70%RH

10msec

≤10W

4,500VA

466.8×283.5×100mm

3,000VA

24Vdc

50/60 (initial value) ±0.1Hz

20~90%RH (no condensation)

0~+40℃ (rated load), +60℃ (50% load)

90%

100 (initial value) /110/115/120Vac

3,450VA

Sine wave (less than 3% distortion)

Temperature load linked fan

21~30Vdc

45Vdc

Input undervoltage, input overvoltage, input reverse polarity connection (fuse), output overload, output short circuit, overtemperature

-30~+70℃/10~95%RH (no condensation)

40A

6,000VA

30A

28.5Vdc

12A

28.5Vdc

TN-3000-148G

Available upon quote

≤1mA

12.9kg

10~500Hz, 3G 10min./1cycle, 60 minutes in each direction of XYZ

Battery Input – AC Output: 3.0kVac, AC Output – Chassis Ground: 1.5kVac

100MΩ/500Vdc/25℃/70%RH

10msec

≤10W

4,500VA

466.8×283.5×100mm

3,000VA

48Vdc

50/60 (initial value) ±0.1Hz

20~90%RH (no condensation)

0~+40℃ (rated load), +60℃ (50% load)

91%

100 (initial value) /110/115/120Vac

3,450VA

Sine wave (less than 3% distortion)

Temperature load linked fan

42~60Vdc

75Vdc

Input undervoltage, input overvoltage, input reverse polarity connection (fuse), output overload, output short circuit, overtemperature

-30~+70℃/10~95%RH (no condensation)

40A

6,000VA

30A

57Vdc

6A

57Vdc

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Power Inverters Products

Other products of Denryo Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Denryo Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree