DC-AC inverter TS series TS-200
Denryo Co., Ltd.
About This Product
The TS series is a DC-AC sine wave inverter that converts DC voltage to AC sine wave voltage. The output waveform is the same sine wave as the commercial power supply, and the distortion rate is less than 3%. Suitable for powering precision equipment such as measuring instruments. High efficiency of 84.5-91% on average. Contributes to improving system efficiency. The generous design allows you to instantly extract surge power up to twice the rated output.
It also has a wide range of protection functions and a wide operating temperature range of 0 to +60℃, allowing it to be used in a variety of environments and applications.
■Sine wave/high surge capacity
Achieves a sine wave with a distortion rate of 3% or less, making it suitable for power supplies for precision equipment such as measuring instruments. The generous design allows you to instantly extract surge power up to twice the rated output.
■LED display/abundant protection circuits
You can easily determine the load level, battery, and inverter status. Equipped with protection circuits for input high/low voltage, overload, overtemperature, reverse connection, output short circuit, etc., to prevent system peripheral equipment failure.
■Wide operating temperature range
Outputs 100% of the rating from 0 to +40°C (-10 to +35°C for TS-200). Up to +60℃, 50% of rated output can be achieved.
*Output does not stop automatically. In environments exceeding 40℃ (35℃ for TS-200), use the load according to the characteristic diagram of each model.
■Remote control possible
The TS-200/400 can control the start/stop of output using the remote control connector on the main unit. With the TS-1500/3000, you can control output start/stop or check the operating status by using the optional remote controller.
■Output voltage and frequency can be set
Output voltage and output frequency can be changed with DIP switches. Output voltage can be changed to 100/110/115/120Vac and output frequency can be changed to 50/60Hz. It can be used in regions and appliances with different voltages and frequencies.
-
Product
DC-AC inverter TS series TS-200
-
Handling Company
Denryo Co., Ltd.
-
Categories
2 Models of DC-AC inverter TS series TS-200
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Cooling | Current consumption when power is OFF | Dimensions (L×W×H) | Efficiency (average value) | Frequency (switchable) | Input voltage range | Insulation resistance | Maximum output power (10 seconds) | No-load standby power (power save mode) | Operating humidity range | Operating temperature range | Output power (3 minutes) | Output voltage (switchable) | Output waveform | Pressure resistance | Protection circuit | Rated input voltage | Rated output power | Storage temperature/humidity range | Surge power (30 cycles) | Vibration resistance | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TS-200-112A |
Available upon quote | Temperature load linked fan | ≤1mA | 205×158×59mm | 86% | 50/60 (initial value) ±0.1Hz | 10.5~15Vdc | 100MΩ/500Vdc/25℃/70%RH | 300VA | 1.25A | 20~90%RH (no condensation) | -10~+35℃ (rated load), +60℃ (50% load) | 230VA | 100 (initial value) /110/115/120Vac | Sine wave (less than 3% distortion) | Battery Input – AC Output: 3.0kVac, AC Output – Chassis Ground: 1.5kVac | Input undervoltage, input overvoltage, input reverse polarity connection (fuse), output overload, output short circuit, overtemperature | 12Vdc | 200VA | -30~+70℃/10~95%RH (no condensation) | 400VA | 10~500Hz, 3G 10min./1cycle, 60 minutes in each direction of XYZ | 1.63kg |
TS-200-124A |
Available upon quote | Temperature load linked fan | ≤1mA | 205×158×59mm | 87.50% | 50/60 (initial value) ±0.1Hz | 10.5~15Vdc | 100MΩ/500Vdc/25℃/70%RH | 300VA | 0.63A | 20~90%RH (no condensation) | -10~+35℃ (rated load), +60℃ (50% load) | 230VA | 100 (initial value) /110/115/120Vac | Sine wave (less than 3% distortion) | Battery Input – AC Output: 3.0kVac, AC Output – Chassis Ground: 1.5kVac | Input undervoltage, input overvoltage, input reverse polarity connection (fuse), output overload, output short circuit, overtemperature | 24Vdc | 200VA | -30~+70℃/10~95%RH (no condensation) | 400VA | 10~500Hz, 3G 10min./1cycle, 60 minutes in each direction of XYZ | 1.63kg |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Denryo Co., Ltd.
View more products of Denryo Co., Ltd.
About Company Handling This Product
- Japan