All Categories

History

DC-AC inverter SD series SD3500-SD3500-112
DC-AC inverter SD series SD3500-Denryo Co., Ltd.

DC-AC inverter SD series SD3500
Denryo Co., Ltd.


About This Product

The SD series is a next-generation DC-AC sine wave inverter with N+1 redundancy and commercial power selector switch. In the N+1 method, up to 5 units can output in parallel with an output capacity of up to 17.5kVA. In the unlikely event that the inverter fails, the system can continue to operate without stopping, improving system reliability. It also has a built-in bypass relay that synchronizes with the commercial power supply, allowing you to set the priority source for the commercial power supply and inverter. Suitable as an emergency power source during disasters, a backup power system for power outages, and an auxiliary power source for independent solar systems. There is less vibration and noise than a generator, and there is no need to carry exhaust gas or fuel. With the SD series, you can also build a three-phase AC or single-phase three-wire system by combining multiple units of the same model. Three of the same model can output three-phase AC. Can be used in industrial applications such as power motors. You can build a single-phase three-wire system with two of the same model and operate a 100V load and a 200V load in one system.

■Parallel function

Up to 5 units can be connected in parallel to expand output capacity. In addition, N+1 redundancy allows you to prepare an extra number in addition to the number required for operation to prevent system stoppage due to failure.

■Single-phase three-wire AC output

You can build a single-phase three-wire system by combining two units of the same model. One system can operate 100V and 200V loads.

■Three-phase AC power supply (Y connection)

You can output three-phase AC by combining three units of the same model. It can also be used in industrial applications such as power motors. It also supports Δ connection loads.

■Built-in automatic switching relay that allows priority source selection

The switching relay instantly (4msec or 6msec) prevents the load from shutting down. You can set the priority source for commercial power and inverter, so it can be used as a countermeasure against power outages or as an auxiliary power source for standalone solar systems. *To configure, you need to connect to a PC with the optional controller CR-10 or serial communication conversion cable CC-1.

  • Product

    DC-AC inverter SD series SD3500

Share this product


510+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of DC-AC inverter SD series SD3500

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Weight Vibration resistance Pressure resistance Insulation resistance Uninterrupted switching time No load current Current consumption (power save mode) Maximum efficiency Maximum output power (3 seconds) Dimensions (L×W×H) Rated output power Rated input voltage Safety standards Frequency (switchable) Operating temperature range Output voltage (switchable) Output power (3 minutes) Output waveform Output protection circuit Cooling Input protection circuit Storage temperature/humidity range Breaker Surge power (0.2 seconds or less) E mark EMC standard DC input voltage range AC input voltage range AC input selection frequency AC input synchronous frequency
DC-AC inverter SD series SD3500-Part Number-SD3500-112

SD3500-112

Available upon quote

10kg

10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ

Battery Input – AC Output: 2,121Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 1,414Vdc

100MΩ/500Vdc

Less than 4msec when used alone, less than 6msec when operated in parallel

<2.9A

1.4A

90%

4,500~6.4000VA

496×283×128mm

3,500VA

12Vdc

-

50/60 (initial value) Hz±0.1%

-20~+60℃

100 (initial value) /110/115/120Vac±3%

3,500~4,500VA

Sine wave (distortion rate 3% or less)

Overload, short circuit, overtemperature, overvoltage

Temperature load linked fan

Undervoltage, overvoltage, reverse polarity connection (fuse), AC input overcurrent (breaker)

-40~+70℃/0~90%RH (no condensation)

35A

>6,000VA

- -

10.0~16.0Vdc

100/110/115/120Vac±12.5%

50/60Hz

47~57/53~63Hz

SD3500-124

Available upon quote

10kg

10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ

Battery Input – AC Output: 2,121Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 1,414Vdc

100MΩ/500Vdc

Less than 4msec when used alone, less than 6msec when operated in parallel

<1.4A

0.5A

90%

4,500~6.4000VA

496×283×128mm

3,500VA

24Vdc

-

50/60 (initial value) Hz±0.1%

-20~+60℃

100 (initial value) /110/115/120Vac±3%

3,500~4,500VA

Sine wave (distortion rate 3% or less)

Overload, short circuit, overtemperature, overvoltage

Temperature load linked fan

Undervoltage, overvoltage, reverse polarity connection (fuse), AC input overcurrent (breaker)

-40~+70℃/0~90%RH (no condensation)

35A

>6,000VA

- -

20.0~32.0Vdc

100/110/115/120Vac±12.5%

50/60Hz

47~57/53~63Hz

SD3500-148

Available upon quote

10kg

10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ

Battery Input – AC Output: 2,121Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 1,414Vdc

100MΩ/500Vdc

Less than 4msec when used alone, less than 6msec when operated in parallel

<0.8A

0.5A

91%

4,500~6.4000VA

496×283×128mm

3,500VA

48Vdc

-

50/60 (initial value) Hz±0.1%

-20~+60℃

100 (initial value) /110/115/120Vac±3%

3,500~4,500VA

Sine wave (distortion rate 3% or less)

Overload, short circuit, overtemperature, overvoltage

Temperature load linked fan

Undervoltage, overvoltage, reverse polarity connection (fuse), AC input overcurrent (breaker)

-40~+70℃/0~90%RH (no condensation)

35A

>6,000VA

- -

40.0~64.0Vdc

100/110/115/120Vac±12.5%

50/60Hz

47~57/53~63Hz

SD3500-212

Available upon quote

10kg

10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ

Battery Input – AC Output: 4,242Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 2,121Vdc

100MΩ/500Vdc

Less than 4msec when used alone, less than 6msec when operated in parallel

<3.6A

1.4A

90%

4,500~6.4000VA

496×283×128mm

3,500VA

12Vdc

EN62368-1

50 (initial value) /60Hz±0.1%

-20~+60℃

200 (initial value) /220/230/240Vac±3%

3,500~4,500VA

Sine wave (distortion rate 3% or less)

Overload, short circuit, overtemperature, overvoltage

Temperature load linked fan

Undervoltage, overvoltage, reverse polarity connection (fuse), AC input overcurrent (breaker)

-40~+70℃/0~90%RH (no condensation)

20A

>6,000VA

CISPR 25; ISO 7637-2

EN55014-1, EN55014-2; EN61000-3-2, -3-3; EN61204-3; EN61000-6-1, -6-2, -6-3, -6-4

10.0~16.0Vdc

200/220/230/240Vac±12.5%

50/60Hz

47~57/53~63Hz

SD3500-224

Available upon quote

10kg

10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ

Battery Input – AC Output: 4,242Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 2,121Vdc

100MΩ/500Vdc

Less than 4msec when used alone, less than 6msec when operated in parallel

<1.8A

0.5A

91%

4,500~6.4000VA

496×283×128mm

3,500VA

24Vdc

EN62368-1

50 (initial value) /60Hz±0.1%

-20~+60℃

200 (initial value) /220/230/240Vac±3%

3,500~4,500VA

Sine wave (distortion rate 3% or less)

Overload, short circuit, overtemperature, overvoltage

Temperature load linked fan

Undervoltage, overvoltage, reverse polarity connection (fuse), AC input overcurrent (breaker)

-40~+70℃/0~90%RH (no condensation)

20A

>6,000VA

CISPR 25; ISO 7637-2

EN55014-1, EN55014-2; EN61000-3-2, -3-3; EN61204-3; EN61000-6-1, -6-2, -6-3, -6-4

20.0~32.0Vdc

200/220/230/240Vac±12.5%

50/60Hz

47~57/53~63Hz

SD3500-248

Available upon quote

10kg

10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ

Battery Input – AC Output: 4,242Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 2,121Vdc

100MΩ/500Vdc

Less than 4msec when used alone, less than 6msec when operated in parallel

<1A

0.5A

91%

4,500~6.4000VA

496×283×128mm

3,500VA

48Vdc

EN62368-1

50 (initial value) /60Hz±0.1%

-20~+60℃

200 (initial value) /220/230/240Vac±3%

3,500~4,500VA

Sine wave (distortion rate 3% or less)

Overload, short circuit, overtemperature, overvoltage

Temperature load linked fan

Undervoltage, overvoltage, reverse polarity connection (fuse), AC input overcurrent (breaker)

-40~+70℃/0~90%RH (no condensation)

20A

>6,000VA

CISPR 25; ISO 7637-2

EN55014-1, EN55014-2; EN61000-3-2, -3-3; EN61204-3; EN61000-6-1, -6-2, -6-3, -6-4

40.0~64.0Vdc

200/220/230/240Vac±12.5%

50/60Hz

47~57/53~63Hz

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Power Inverters Products

Other products of Denryo Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Denryo Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree