DC-AC inverter SP series SP-4000
Denryo Co., Ltd.
About This Product
The SP series is a DC-AC sine wave inverter that converts DC voltage to AC sine wave voltage. The output waveform is the same sine wave as the commercial power supply, and the distortion rate is less than 5% for the 100V model and less than 3% for the 200V model. Thanks to the high-efficiency circuit and switching control designed using advanced power electronics and microprocessor technology, it achieves an efficiency of over 90% at rated load and is up to 42% lighter than conventional products.
In addition, the input voltage range has been set wide and the upper limit has been raised higher than previous models, allowing you to choose from a variety of batteries. You can use the inverter while charging the battery.
The SP series has a built-in remote control function. An error signal can be output externally when a failure occurs. It also has a remote ON/OFF control function, making it suitable for integration into a system. It also has a communication function with a computer. Various settings and the status of the inverter and battery can be monitored remotely, so it can be used in a variety of environments and applications.
■Lighter weight
Up to 42% lighter (compared to our same class models). This improves transportation efficiency and workability, leading to cost reductions.
■Wide input voltage range
The wide input voltage range allows for a wider range of input power options than just lead-acid batteries.
■Wide operating temperature range
-20 to +40℃ outputs 100% of the rating. From 40 to 60℃, it can output 40% of the rated value.
*Output does not stop automatically. In environments exceeding 40℃, please use the load according to the characteristic diagram of each model.
■Output voltage and frequency can be set
Output voltage and output frequency can be changed with DIP switches. The output voltage of the 100Vac model can be changed to 100/110/115/120Vac, and the 200Vac model can be changed to 200/220/230/240Vac. Output frequency can be switched to 50/60Hz. It can be used in regions and appliances with different voltages and frequencies.
■Sine wave output/high surge capacity
Achieves a sine wave with a distortion rate of 5% or less, and has a generous design that can handle surge power up to 175-200% of the rated output.
■Configurable power save mode
By setting the power save mode, you can reduce the inverter's own power consumption when it is in standby mode. Reduces battery consumption.
-
Product
DC-AC inverter SP series SP-4000
-
Handling Company
Denryo Co., Ltd.
-
Categories
4 Models of DC-AC inverter SP series SP-4000
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Cooling | Dimensions (L×W×H) | E mark | EMC standard | Frequency (switchable) | Input voltage range | Insulation resistance | Maximum efficiency | Maximum output power (1 minute) | No load current | Operating temperature range | Output voltage (switchable) | Output waveform | Pressure resistance | Protection circuit | Rated input voltage | Rated output power | Safety standards | Standby current (power save mode) | Storage temperature/humidity range | Surge power (1 second) | Vibration resistance | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SP-4000-124G |
Available upon quote | Temperature load linked fan | 462×255×158mm | - | - | 50/60 (initial value) Hz±0.5% | 21~33Vdc | 100MΩ/500Vdc | 91% | 4,000~4,600VA (100~115%) | ≤2.0A | -20~+40℃ (rated load), +60℃ (40% load) | 100 (initial value) /110/115/120Vac±5% | Sine wave (distortion rate 5% or less) | Battery Input – AC Output: 2,121Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 1,414Vdc | Input undervoltage, input overvoltage, input reverse polarity connection (fuse), output overload, output short circuit, output overtemperature/undertemperature | 24Vdc | 4,000VA±3% | - | <0.2A | -30~+70℃/10~95%RH (no condensation) | <8,000VA | 10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ | 10kg |
SP-4000-148G |
Available upon quote | Temperature load linked fan | 462×255×158mm | - | - | 50/60 (initial value) Hz±0.5% | 42~66Vdc | 100MΩ/500Vdc | 91% | 4,000~4,600VA (100~115%) | ≤1.0A | -20~+40℃ (rated load), +60℃ (40% load) | 100 (initial value) /110/115/120Vac±5% | Sine wave (distortion rate 5% or less) | Battery Input – AC Output: 2,121Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 1,414Vdc | Input undervoltage, input overvoltage, input reverse polarity connection (fuse), output overload, output short circuit, output overtemperature/undertemperature | 48Vdc | 4,000VA±3% | - | <0.1A | -30~+70℃/10~95%RH (no condensation) | <8,000VA | 10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ | 10kg | |
SP-4000-224G |
Available upon quote | Temperature load linked fan | 462×255×158mm | CISPR 25; ISO 7637-2 | EN55022 class A; EN55024; EN61000-3-2,-3-3; EN61000-4-2, 3, 4, 5, 6, 8, 11 | 50 (initial value) /60Hz±0.5% | 21~33Vdc | 100MΩ/500Vdc | 90% | 4,000~4,600VA (100~115%) | ≤2.0A | -20~+40℃ (rated load), +60℃ (40% load) | 200 (initial value) /220/230/240Vac±3% | Sine wave (distortion rate 3% or less) | Battery Input – AC Output: 4,242Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 2,121Vdc | Input undervoltage, input overvoltage, input reverse polarity connection (fuse), output overload, output short circuit, output overtemperature/undertemperature | 24Vdc | 4,000VA±3% | EN62368-1 | <0.2A | -30~+70℃/10~95%RH (no condensation) | <8,000VA | 10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ | 10kg | |
SP-4000-248G |
Available upon quote | Temperature load linked fan | 462×255×158mm | CISPR 25; ISO 7637-2 | EN55022 class A; EN55024; EN61000-3-2,-3-3; EN61000-4-2, 3, 4, 5, 6, 8, 11 | 50 (initial value) /60Hz±0.5% | 42~66Vdc | 100MΩ/500Vdc | 91% | 4,000~4,600VA (100~115%) | ≤1.0A | -20~+40℃ (rated load), +60℃ (40% load) | 200 (initial value) /220/230/240Vac±3% | Sine wave (distortion rate 3% or less) | Battery Input – AC Output: 4,242Vdc Battery Input – Chassis Ground: 500Vdc AC Output – Chassis Ground: 2,121Vdc | Input undervoltage, input overvoltage, input reverse polarity connection (fuse), output overload, output short circuit, output overtemperature/undertemperature | 48Vdc | 4,000VA±3% | EN62368-1 | <0.1A | -30~+70℃/10~95%RH (no condensation) | <8,000VA | 10~500Hz, 2G 10min./1cycle, 60 minutes in each direction of XYZ | 10kg |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Denryo Co., Ltd.
View more products of Denryo Co., Ltd.
About Company Handling This Product
- Japan