All Categories

History

Incubator with white LED lighting FLI-LED series-FLI-2010A-LED
Incubator with white LED lighting FLI-LED series-Tokyo Rikakikai Co., Ltd.

Incubator with white LED lighting FLI-LED series
Tokyo Rikakikai Co., Ltd.

Tokyo Rikakikai Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

41.4hours


About This Product

■Compatible with light acceleration and deterioration tests using white LED fluorescent lamps

The FLI-LED series can control the light, temperature, and humidity (H-LED and HT-LED types only) of white LED fluorescent lights. Suitable for photo-degradation tests, environmental tests, irradiation and photo-acceleration tests for foods, beverages, cosmetics, etc., and photo-acceleration and photo-deterioration tests for chemical products and raw materials, etc. due to the shift to LED lighting for stores and facilities. You can select the control mode according to the usage situation and purpose. If temperature control accuracy is required when setting a temperature higher than room temperature, please select mode 1 (normal mode) for heater control and mode 2 (Eco mode) for energy-saving operation by controlling ON/OFF of the refrigerator. Unlike conventional fluorescent lights, white LED fluorescent lights have a long lifespan, do not reduce brightness or flicker when they deteriorate, and reduce power consumption. You can check the program progress (illuminance: step program, temperature/humidity: gradient program) on a graphic display. Equipped with an air curtain mechanism that suppresses changes in temperature and humidity when the inner door is opened, and a germicidal lamp that suppresses the adhesion and growth of germs. The air volume adjustment function allows you to set the air volume according to the sample to be placed in the chamber. Powdered samples can also be used. Displays the cumulative operating time of white LED fluorescent lights, germicidal lights, humidifiers, etc., so you can easily check when to clean or replace them. Equipped with a recorder output terminal and RS-232C connection terminal as standard. Comes with an RS-232C communication cable and dedicated software that can process trend data for each parameter.

  • Product

    Incubator with white LED lighting FLI-LED series

Share this product


280+ people viewing

Last viewed: 14 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Incubator with white LED lighting FLI-LED series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Defrost function Power input/power voltage Mass Illuminance adjustment range Illuminance distribution accuracy Humidity adjustment range Humidity control Temperature control range Temperature control Temperature/humidity/illumination setting/display Temperature/humidity control accuracy Temperature/humidity distribution (JTM K09) Shelf plate load capacity, material, number of shelves Number of shelves included/shelf pitch Internal dimensions (mm)・Capacity・Interior Convection method External dimensions (mm) Humidifier Freezer/refrigerant Operating ambient temperature range Program function Heater Cable hole/service outlet Other functions
Incubator with white LED lighting FLI-LED series-Part Number-FLI-2010A-LED

FLI-2010A-LED

Available upon quote

1. Automatic control type (4 patterns during operation) 2. Forced manual type (manual start, automatic stop) 3. Timer control type (automatic start, stop, repeat) 4. Defrost heating/cooling

22A, 2.2kVA・AC100V 50/60Hz

Approximately 235kg

0 to approx. 30,000L x 6 steps (step dimming)

±10%

- -

0~50℃ (when lights are off), 10~50℃ (when all lights are on), 15~50℃ (when high illuminance unit is installed: A/H type only)

Mode 1 (normal mode): Heater control P.I.D control SSR output, Mode 2 (Eco mode): Freezer control ON-OFF control

P.I.D control sheet key input/digital display Minimum digit 0.1℃/0.1%RH (H/HT-LED type)/10Lx (T-LED/HT-LED type) Accumulated time (1 to 999 days 23 hours 59 minutes) etc.

Mode 1 (Normal mode): ±0.5℃, Mode 2 (Eco mode): ±1.5℃

Mode 1 (normal mode): Space temperature deviation, temperature gradient 3.0°C, 3.0°C Mode 2 (Eco mode): Space temperature deviation, temperature gradient 4.0°C, 4.0°C

Equal distribution Max.25kg/piece, PE coating, 17 stages

3 sheets/50mm

520W×520D×1,085H・290L・Stainless steel

Downdraft method

720 (750) W×854 (918) D×1,810H

-

Air-cooled output 400W/R404A

5~35℃

Auto start, auto stop, user program, 24 hour program, auto start + user program, linked program

900W

1 location on the right side, inner diameter 40mm, service outlet (outside the refrigerator, 2 outlets, total Max. 1A)

RS-232C communication terminal, recorder output terminal (temperature/humidity, illuminance), alarm output terminal (contact/non-voltage type), temperature/humidity display calibration, maintenance mode, germicidal lamp, interior lighting

FLI-2010T-LED

Available upon quote

1. Automatic control type (4 patterns during operation) 2. Forced manual type (manual start, automatic stop) 3. Timer control type (automatic start, stop, repeat) 4. Defrost heating/cooling

23A, 2.3kVA・AC100V 50/60Hz

Approximately 240kg

0 or 1,000~30,000Lx stepless dimming (10Lx units)

±10%

- -

0~50℃ (when lights are off), 10~50℃ (when all lights are on), 15~50℃ (when high illuminance unit is installed: A/H type only)

Mode 1 (normal mode): Heater control P.I.D control SSR output, Mode 2 (Eco mode): Freezer control ON-OFF control

P.I.D control sheet key input/digital display Minimum digit 0.1℃/0.1%RH (H/HT-LED type)/10Lx (T-LED/HT-LED type) Accumulated time (1 to 999 days 23 hours 59 minutes) etc.

Mode 1 (Normal mode): ±0.5℃, Mode 2 (Eco mode): ±1.5℃

Mode 1 (normal mode): Space temperature deviation, temperature gradient 3.0°C, 3.0°C Mode 2 (Eco mode): Space temperature deviation, temperature gradient 4.0°C, 4.0°C

Equal distribution Max.25kg/piece, PE coating, 17 stages

3 sheets/50mm

520W×520D×1,085H・290L・Stainless steel

Downdraft method

720 (750) W×854 (918) D×1,810H

-

Air-cooled output 400W/R404A

5~35℃

Auto start, auto stop, user program, 24 hour program, auto start + user program, linked program

900W

1 location on the right side, inner diameter 40mm, service outlet (outside the refrigerator, 2 outlets, total Max. 1A)

RS-232C communication terminal, recorder output terminal (temperature/humidity, illuminance), alarm output terminal (contact/non-voltage type), temperature/humidity display calibration, maintenance mode, germicidal lamp, interior lighting

FLI-2010H-LED

Available upon quote

1. Automatic control type (4 patterns during operation) 2. Forced manual type (manual start, automatic stop) 3. Timer control type (automatic start, stop, repeat) 4. Defrost heating/cooling

22A, 2.2kVA・AC100V 50/60Hz

Approximately 245kg

0 to approx. 30,000L x 6 steps (step dimming)

±10%

50~90%RH (when lights are off), 50~80%RH (when all lights are on)

P.I.D control

0~50℃ (when lights are off), 10~50℃ (when all lights are on), 15~50℃ (when high illuminance unit is installed: A/H type only)

Mode 1 (normal mode): Heater control P.I.D control SSR output, Mode 2 (Eco mode): Freezer control ON-OFF control

P.I.D control sheet key input/digital display Minimum digit 0.1℃/0.1%RH (H/HT-LED type)/10Lx (T-LED/HT-LED type) Accumulated time (1 to 999 days 23 hours 59 minutes) etc.

Mode 1 (Normal mode): ±0.5℃/±5%RH, Mode 2 (Eco mode): ±1.5℃/±10%RH

Mode 1 (normal mode): Space temperature/humidity deviation, temperature/humidity gradient 3.0℃/9%RH Mode 2 (Eco mode): Space temperature/humidity deviation, temperature/humidity gradient 4.0℃/10%RH

Equal distribution Max.25kg/piece, PE coating, 17 stages

3 sheets/50mm

520W×520D×1,085H・290L・Stainless steel

Downdraft method

720 (750) W×854 (918) D×1,810H

Ultrasonic humidification (oscillator life: approximately 10,000 hours)

Air-cooled output 400W/R404A

5~35℃

Auto start, auto stop, user program, 24 hour program, auto start + user program, linked program

900W

1 location on the right side, inner diameter 40mm, service outlet (outside the refrigerator, 2 outlets, total Max. 1A)

RS-232C communication terminal, recorder output terminal (temperature/humidity, illuminance), alarm output terminal (contact/non-voltage type), temperature/humidity display calibration, maintenance mode, germicidal lamp, interior lighting

FLI-2010HT-LED

Available upon quote

1. Automatic control type (4 patterns during operation) 2. Forced manual type (manual start, automatic stop) 3. Timer control type (automatic start, stop, repeat) 4. Defrost heating/cooling

23A, 2.3kVA・AC100V 50/60Hz

Approximately 250kg

0 or 1,000~30,000Lx stepless dimming (10Lx units)

±10%

50~90%RH (when lights are off), 50~80%RH (when all lights are on)

P.I.D control

0~50℃ (when lights are off), 10~50℃ (when all lights are on), 15~50℃ (when high illuminance unit is installed: A/H type only)

Mode 1 (normal mode): Heater control P.I.D control SSR output, Mode 2 (Eco mode): Freezer control ON-OFF control

P.I.D control sheet key input/digital display Minimum digit 0.1℃/0.1%RH (H/HT-LED type)/10Lx (T-LED/HT-LED type) Accumulated time (1 to 999 days 23 hours 59 minutes) etc.

Mode 1 (Normal mode): ±0.5℃/±5%RH, Mode 2 (Eco mode): ±1.5℃/±10%RH

Mode 1 (normal mode): Space temperature/humidity deviation, temperature/humidity gradient 3.0℃/9%RH Mode 2 (Eco mode): Space temperature/humidity deviation, temperature/humidity gradient 4.0℃/10%RH

Equal distribution Max.25kg/piece, PE coating, 17 stages

3 sheets/50mm

520W×520D×1,085H・290L・Stainless steel

Downdraft method

720 (750) W×854 (918) D×1,810H

Ultrasonic humidification (oscillator life: approximately 10,000 hours)

Air-cooled output 400W/R404A

5~35℃

Auto start, auto stop, user program, 24 hour program, auto start + user program, linked program

900W

1 location on the right side, inner diameter 40mm, service outlet (outside the refrigerator, 2 outlets, total Max. 1A)

RS-232C communication terminal, recorder output terminal (temperature/humidity, illuminance), alarm output terminal (contact/non-voltage type), temperature/humidity display calibration, maintenance mode, germicidal lamp, interior lighting

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Low Temperature Incubators Products

Other products of Tokyo Rikakikai Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Rikakikai Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

41.4hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree