All Categories

History

Constant temperature constant temperature device Enviros KCL-2000A/2000W type-KCL-2000A
Constant temperature constant temperature device Enviros KCL-2000A/2000W type-KCL-2000W
Constant temperature constant temperature device Enviros KCL-2000A/2000W type-Tokyo Rikakikai Co., Ltd.

Constant temperature constant temperature device Enviros KCL-2000A/2000W type
Tokyo Rikakikai Co., Ltd.

Tokyo Rikakikai Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

41.8hours


About This Product

■For various deterioration tests, acceleration tests, and environmental tests

It provides a detailed test environment with a wide range of -15 to 85℃, 25 to 98% RH, highly accurate temperature and humidity control, and equipped with a gradient program. Equipped with recorder output terminal, alarm output terminal, and RS-232C communication terminal as standard. Although it is a space-saving and slim type, it has a large internal capacity of 140L. Displays on the screen when it is time to replace the wet bulb wick and when to clean the humidifying pan. Maintenance can also be easily performed from the front. Antibacterial tubes are used for piping to suppress the growth of bacteria. Equipped with a stand with casters as standard. If you do not have drainage equipment, you can store an optional drain tank etc. without taking up space. KCL-2000W type is equipped with a large observation window. To prevent condensation on the observation window, a heating wire is placed inside the window. Comes with software that can process trend data for each parameter.

■Complete safety features

・Centralized alarm monitoring function Dry bulb temperature sensor failure, wet bulb temperature sensor failure, heater abnormality, refrigerator high pressure abnormality, refrigerator overload operation, temperature gradient failure, power outage, overheating, overcooling, cooling failure, water level sensor failure, humidity control failure, Humidity upper limit failure, flow abnormality, water tank dry, door open, watchdog, SSR abnormality ・Variable independent overheating preventer ・Earth leakage/overcurrent breaker

■Enhanced communication functions and support validation

Equipped with recorder output, alarm output terminal, and RS-232C communication terminal as standard. It outputs the temperature and humidity inside the refrigerator, and in the unlikely event of an abnormality, it can immediately notify the central control panel or turn on a patrol light. The operating status is computer-managed via RS-232C to support validation.

  • Product

    Constant temperature constant temperature device Enviros KCL-2000A/2000W type

Share this product


280+ people viewing

Last viewed: 29 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Constant temperature constant temperature device Enviros KCL-2000A/2000W type

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power input/power voltage Dehumidification method Mass Observation window dimensions (mm) Water tank capacity Humidity adjustment range (accuracy) Temperature control range (accuracy) Temperature/humidity control method Temperature/humidity distribution accuracy Shelf plate load capacity, material, number of shelves Number of shelves included/shelf pitch Internal dimensions (mm) ・Capacity Convection method External input/output External dimensions (mm) Freezer/refrigerant Interior Operating ambient temperature range Heater Door packing material Cable hole Other features
Constant temperature constant temperature device Enviros KCL-2000A/2000W type-Part Number-KCL-2000A

KCL-2000A

Available upon quote

15A, 1.5kVA・AC100V 50/60Hz

Normal operation: automatic control (interval defrost mode) forced manual type (manual start, automatic stop/manual stop)

Approximately 145kg

-

Internal: Approx. 10L (removable from the front) External: Approx. 20L (one-touch socket connection)

±0.2℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control

Temperature gradient 2.5℃ (when set at 37℃)

Equal distribution Max.15kg/piece, stainless steel, 10 stages

2 sheets/40mm

500W×400D×700H・140L

Air jacket type natural convection method

RS-232C connection terminal Temperature/humidity recorder output terminal (temperature 1℃/mV, humidity 1%RH/mV) Output: -200 to 200mV alarm output terminal (contact/non-voltage type, contact capacity AC250V5A, normally OFF , ON when abnormal)

635 (800) W×777D×1,695H (including stand) 600 (800) W×777D×1,285H (product body)

Air-cooled output 200W/R134a

Stainless

5~35℃

Heater for heating 650W, heater for humidification 200W, 400W

Silicon

1 location (right side of main body) Inner diameter 40mm

Calibration of temperature and humidity display, external water supply, maintenance mode, forced drainage

Constant temperature constant temperature device Enviros KCL-2000A/2000W type-Part Number-KCL-2000W

KCL-2000W

Available upon quote

15A, 1.5kVA・AC100V 50/60Hz

Normal operation: automatic control (interval defrost mode) forced manual type (manual start, automatic stop/manual stop)

Approximately 153kg

200W x 540H, quadruple glass (with heater)

Internal: Approx. 10L (removable from the front) External: Approx. 20L (one-touch socket connection)

±0.2℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control

Temperature gradient 2.5℃ (when set at 37℃)

Equal distribution Max.15kg/piece, stainless steel, 10 stages

2 sheets/40mm

500W×400D×700H・140L

Air jacket type natural convection method

RS-232C connection terminal Temperature/humidity recorder output terminal (temperature 1℃/mV, humidity 1%RH/mV) Output: -200 to 200mV alarm output terminal (contact/non-voltage type, contact capacity AC250V5A, normally OFF , ON when abnormal)

635 (800) W×777D×1,695H (including stand) 600 (800) W×777D×1,285H (product body)

Air-cooled output 200W/R134a

Stainless

5~35℃

Heater for heating 650W, heater for humidification 200W, 400W

Silicon

1 location (right side of main body) Inner diameter 40mm

Calibration of temperature and humidity display, external water supply, maintenance mode, forced drainage

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Temperature Controllers Products

Other products of Tokyo Rikakikai Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Rikakikai Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

41.8hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree