All Categories

History

Constant temperature soft incubator SLI220/400/700/1200 series-SLI-220
Constant temperature soft incubator SLI220/400/700/1200 series-SLI-400C
Constant temperature soft incubator SLI220/400/700/1200 series-SLI-1200
Constant temperature soft incubator SLI220/400/700/1200 series-Tokyo Rikakikai Co., Ltd.

Constant temperature soft incubator SLI220/400/700/1200 series
Tokyo Rikakikai Co., Ltd.

Tokyo Rikakikai Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

39.2hours


About This Product

■Stable temperature control with air jacket method

Since it uses an air jacket type natural convection method, it has excellent temperature distribution accuracy and can perform stable temperature control with few sudden temperature changes. Suitable for culturing microorganisms that dislike wind. Culture can also be performed using a shaker, etc. using the service outlet inside the refrigerator. (Optional shaker shelf is required. Except for SLI-220 model) The C type has cable holes on both sides of the main unit, allowing you to insert and remove various connection cords and sensors. A temperature recorder output terminal can be added as an option. (Excluding model SLI-220) Equipped with timer function (auto start, auto stop). In the event of a power outage during timer operation, you can select how the device will operate after the power is restored. (Continues the timer from the state before the power outage, resets to the initial setting time and restarts, stops operation) As a safety function, if a problem occurs, you will be notified with an alarm display and a warning buzzer. SLI-220 models and SLI-400 models can be stacked on top of each other, making effective use of installation space.

  • Product

    Constant temperature soft incubator SLI220/400/700/1200 series

Share this product


660+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

7 Models of Constant temperature soft incubator SLI220/400/700/1200 series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power input/power voltage Mass Temperature control accuracy Temperature control range Temperature control/setting/display Temperature distribution accuracy Temperature distribution (at37℃) Temperature sensor Shelf board load capacity/material Number of shelves included, shelf pitch, and number of tiers Internal dimensions (mm) ・Capacity Convection method Safety features External dimensions (mm) Interior Inner door Operating ambient temperature range Heater Timer time setting range Service outlet Cable hole
Constant temperature soft incubator SLI220/400/700/1200 series-Part Number-SLI-220

SLI-220

Available upon quote

1.5A, 150VA・AC100V 50/60Hz

Approximately 14kg

±0.5℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control SSR output/sheet key input/digital display (temperature display correction, auto start, auto stop 1/2, power failure recovery setting)

±3.5℃ (when set at 37℃)

Space temperature deviation 2.3℃
Temperature gradient 3.4℃

Thermistor

Equal distribution Max.3kg/piece/PE coating

Number of shelves included, shelf pitch, and number of tiers

310W×240D×220H・Approx. 16L

Air jacket type natural convection method

Alarm functions (upper limit temperature, door open, sensor, power outage, temperature control failure, watchdog) Independent overheat preventer (fixed at 70℃), fuse

395W×355 (375)D×420H

Stainless

-

5~35℃

100W

0~99 hours 59 minutes

- -

SLI-400

Available upon quote

3A, 300VA/AC100V 50/60Hz

Approximately 41kg

±0.1℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control SSR output/sheet key input/digital display (temperature display correction, auto start, auto stop 1/2, power failure recovery setting)

±2.5℃ (when set at 37℃)

Space temperature deviation 0.6℃
Temperature gradient 0.7℃

Thermistor

Equal distribution Max.15kg/piece/PE coating

Number of shelves included, shelf pitch, and number of tiers

434W×400D×450H・Approx. 78L

Air jacket type natural convection method

Alarm functions (upper limit temperature, door open, sensor, power outage, temperature control failure, watchdog) Independent overheat preventer (variable 30 to 70°C), earth leakage/overcurrent breaker, fuse (for service outlet)

526 (553) W×550D×800H

Stainless

-

5~35℃

280W

0~99 hours 59 minutes

1 mouth (Max.2A inside)

-
Constant temperature soft incubator SLI220/400/700/1200 series-Part Number-SLI-400C

SLI-400C

Available upon quote

3A, 300VA/AC100V 50/60Hz

Approximately 41kg

±0.1℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control SSR output/sheet key input/digital display (temperature display correction, auto start, auto stop 1/2, power failure recovery setting)

±2.5℃ (when set at 37℃)

Space temperature deviation 0.6℃
Temperature gradient 0.7℃

Thermistor

Equal distribution Max.15kg/piece/PE coating

Number of shelves included, shelf pitch, and number of tiers

434W×400D×450H・Approx. 78L

Air jacket type natural convection method

Alarm functions (upper limit temperature, door open, sensor, power outage, temperature control failure, watchdog) Independent overheat preventer (variable 30 to 70°C), earth leakage/overcurrent breaker, fuse (for service outlet)

526 (553) W×550D×800H

Stainless

-

5~35℃

280W

0~99 hours 59 minutes

1 mouth (Max.2A inside)

2 locations on the left and right, inner diameter 36mm

SLI-700

Available upon quote

3A, 300VA/AC100V 50/60Hz

Approximately 47kg

±0.1℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control SSR output/sheet key input/digital display (temperature display correction, auto start, auto stop 1/2, power failure recovery setting)

±2.0℃ (when set at 37℃)

Space temperature deviation 0.6℃
Temperature gradient 0.7℃

Thermistor

Equal distribution Max.15kg/piece/PE coating

3 sheets, 40mm, 12 steps

434W×400D×700H・Approx. 121L

Air jacket type natural convection method

Alarm functions (upper limit temperature, door open, sensor, power outage, temperature control failure, watchdog) Independent overheat preventer (variable 30 to 70°C), earth leakage/overcurrent breaker, fuse (for service outlet)

526 (553) W×550D×1,050H

Stainless

-

5~35℃

280W

0~99 hours 59 minutes

1 mouth (Max.2A inside)

-

SLI-700C

Available upon quote

3A, 300VA/AC100V 50/60Hz

Approximately 47kg

±0.1℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control SSR output/sheet key input/digital display (temperature display correction, auto start, auto stop 1/2, power failure recovery setting)

±2.0℃ (when set at 37℃)

Space temperature deviation 0.6℃
Temperature gradient 0.7℃

Thermistor

Equal distribution Max.15kg/piece/PE coating

3 sheets, 40mm, 12 steps

434W×400D×700H・Approx. 121L

Air jacket type natural convection method

Alarm functions (upper limit temperature, door open, sensor, power outage, temperature control failure, watchdog) Independent overheat preventer (variable 30 to 70°C), earth leakage/overcurrent breaker, fuse (for service outlet)

526 (553) W×550D×1,050H

Stainless

-

5~35℃

280W

0~99 hours 59 minutes

1 mouth (Max.2A inside)

2 locations on the left and right, inner diameter 36mm

Constant temperature soft incubator SLI220/400/700/1200 series-Part Number-SLI-1200

SLI-1200

Available upon quote

7A, 700VA・AC100V 50/60Hz

Approximately 82kg

±0.2℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control SSR output/sheet key input/digital display (temperature display correction, auto start, auto stop 1/2, power failure recovery setting)

±2.0℃ (when set at 37℃)

Space temperature deviation 2.3℃
Temperature gradient 3.0℃

Thermistor

Equal distribution Max.15kg/piece/PE coating

5 sheets, 40mm, 20 stages

434W×400D×1,200H・Approx. 206L

Air jacket type natural convection method

Alarm functions (upper limit temperature, door open, sensor, power outage, temperature control failure, watchdog) Independent overheat preventer (variable 30 to 70°C), earth leakage/overcurrent breaker, fuse (for service outlet)

550W×590D×1,600H

Stainless

2 transparent acrylic sheets

5~35℃

600W

0~99 hours 59 minutes

1 mouth (Max.2A inside)

-

SLI-1200C

Available upon quote

7A, 700VA・AC100V 50/60Hz

Approximately 82kg

±0.2℃ (when set at 37℃)

Room temperature +5~60℃

P.I.D control SSR output/sheet key input/digital display (temperature display correction, auto start, auto stop 1/2, power failure recovery setting)

±2.0℃ (when set at 37℃)

Space temperature deviation 2.3℃
Temperature gradient 3.0℃

Thermistor

Equal distribution Max.15kg/piece/PE coating

5 sheets, 40mm, 20 stages

434W×400D×1,200H・Approx. 206L

Air jacket type natural convection method

Alarm functions (upper limit temperature, door open, sensor, power outage, temperature control failure, watchdog) Independent overheat preventer (variable 30 to 70°C), earth leakage/overcurrent breaker, fuse (for service outlet)

550W×590D×1,600H

Stainless

2 transparent acrylic sheets

5~35℃

600W

0~99 hours 59 minutes

1 mouth (Max.2A inside)

2 locations on the left and right, inner diameter 36mm

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Temperature Controllers Products

Other products of Tokyo Rikakikai Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Rikakikai Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

39.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree