Built-in type cooling water circulation device Cool Ace CA-1330
Tokyo Rikakikai Co., Ltd.
About This Product
■It also looks neat at the bottom of the draft chamber.
The Cool Ace has a low height and is a built-in type that can be stored under the laboratory table, making effective use of laboratory space. By connecting to a vacuum controller, it is possible to link with system peripheral equipment. When the system stops operating, the circulation pump will stop and stand by. While on standby, the temperature inside the tank is adjusted and circulation is periodically circulated to the piping, so it can be used immediately when operation resumes.
For aqueous samples, use two evaporators (N-1300 type/N-1210B series, 1L sample flask) and two aspirators (A-1000S type), and for solvent-based samples, use an evaporator (N-1300 type/N -1210B series, 2 units each of sample flask (1L) and solvent recovery device (DPE type) can be cooled.
Safety measures are also taken into account, such as a temperature controller self-diagnosis function, refrigerator overload relay, and refrigerator protection timer. We can also manufacture high-pressure pump specifications upon request. (Special order available)
■Circulation nozzle whose direction can be changed freely
The direction of the circulation nozzle can be freely changed 360°, reducing the load on the tube.
■Hose connection without tools or bands
Easy connection just by plugging in the cold storage hose. There is no need to tighten with a band like in the past, or liquid leakage due to insufficient tightening.
■Easy drainage of frosted and melted water droplets
As the nozzle becomes cold, frost forms, which melts and forms water droplets. This water droplet can be caught and drained with a drain tube at the bottom of the main unit.
■One-touch connection with evaporator (optional)
If the rotary evaporator's circulation hose port (one-touch connector) is similar to that of the CA-1330 model, it can be easily connected with the optional one-touch cooling hose set.
-
Product
Built-in type cooling water circulation device Cool Ace CA-1330
-
Handling Company
Tokyo Rikakikai Co., Ltd.
-
Categories
1 Models of Built-in type cooling water circulation device Cool Ace CA-1330
| Product Image | Part Number | Price (excluding tax) | Aquarium material | Attached functions | Cooling capacity (at liquid temperature) -10℃ | Cooling capacity (at liquid temperature) 0℃ | Cooling capacity (at liquid temperature) 10℃ | Cooling coil | Cooling/circulation method | External circulation ability (50/60Hz) | External circulation nozzle | External dimensions (mm) | External input/output | Freezer/refrigerant | Mass | Operating ambient temperature range | Power input/power voltage | Safety features | Temperature control | Temperature control accuracy | Temperature setting range | Temperature setting/display | Water tank capacity | Water tank dimensions (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
CA-1330 |
Available upon quote | Stainless | Ball valve | 600W (516kcal/h) | 800W (688kcal/h) | 1,050W (903kcal/h) | Copper nickel plated | Air-cooled/closed system directional circulation | Maximum flow rate 12/14L/min, maximum head 9.5/13m (Blowout pressure: 0.09/0.13MPa) | One-touch connector inner diameter 10mm, one-touch hose nozzle outer diameter 10mm | 460W×430 (500) D×570 (598) H | Communication terminal for vacuum controller | Air-cooled output 650W/R407A | Approximately 48kg | 5~35℃ | 11A, 1.1kVA・AC100V 50/60Hz | Earth leak/overcurrent breaker, temperature controller self-diagnosis function, refrigerator overload relay, high pressure switch, refrigerator protection timer, circulation pump thermal protector | Freezer ON-OFF control | ±2℃~ | −20~20℃ (without heater) | Sheet key input/digital display/minimum digit 1℃ | 13L (liquid volume 10.5L) | 270W×270D×175H |
Customers who viewed this product also viewed
Other products of Tokyo Rikakikai Co., Ltd.
View more products of Tokyo Rikakikai Co., Ltd.
