All Categories

History

Cooling water circulation system Cool Ace NCA-1000 type-NCA-1000
Cooling water circulation system Cool Ace NCA-1000 type-Tokyo Rikakikai Co., Ltd.

Cooling water circulation system Cool Ace NCA-1000 type
Tokyo Rikakikai Co., Ltd.


About This Product

■Small cooling water circulation device without cooling water tank

Since there is no cooling water tank, the amount of heat medium used is sufficient to fill the circulation path, significantly reducing the amount used. In addition, since the heating medium does not come into contact with air, there is almost no change in composition. Furthermore, the cooling time is short and circulation is rapid. Since the lower limit of the temperature setting range is -20℃, it is possible to concentrate low boiling point solvents. Although it is small, it can circulate to two 1L evaporators and one solvent recovery unit. The optional one-touch cooling hose and circulation nozzle can be attached and detached with one-touch. Eliminates troublesome hose band processing and eliminates leakage of circulating water. Due to its compact size, it can be stored inside a fume hood or under a laboratory bench. Ball casters are equipped as standard on the rear side (2 locations) to make it easier to move the device in and out in narrow spaces. Equipped with a flow rate switch to prevent freezing of the cooling section.

■Equipped with communication function with evaporator

It works in conjunction with the evaporator by connecting it to the evaporator N-1210B series using a communication cable (optional). When the evaporator stops, the cooling water circulation system also stops, reducing condensation caused by overcooling of the evaporator cooler.

■Easy installation with space-saving type

It can be installed in narrow spaces such as above, below, or next to the laboratory bench, or in closed surfaces. Can be connected in parallel to two 1L rotary evaporators.

■Installed even in narrow spaces

It supplies stable cooling water even in places with closed surfaces such as the bottom of a laboratory bench or fume hood.

■Easy one-touch piping

Piping can be installed and removed with one touch. Eliminates the hassle of tightening and removing piping using conventional bands. The direction of the circulation nozzle can be changed freely.

■Significant reduction in heat medium usage

This greatly reduces the amount of alcohol-based heat transfer medium used, which has a low flash point and is designated as a dangerous substance, contributing to improving the laboratory environment.

  • Product

    Cooling water circulation system Cool Ace NCA-1000 type

Share this product


290+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Cooling water circulation system Cool Ace NCA-1000 type

Image Part Number Price (excluding tax) Power input/power voltage Mass Temperature control accuracy Temperature setting range Temperature setting/display Temperature control Water tank capacity Safety features External circulation ability (50/60Hz) External circulation nozzle External input/output External dimensions (mm) Cooling capacity (at liquid temperature) -10℃ Cooling capacity (at liquid temperature) 10℃ Cooling/circulation method Freezer/refrigerant Operating ambient temperature range
Cooling water circulation system Cool Ace NCA-1000 type-Part Number-NCA-1000

NCA-1000

Available upon quote

8A, 800VA/AC100V 50/60Hz

Approximately 37kg

±1℃~

−20~20℃ (without heater)

Sheet key input/digital display/minimum digit 1℃

Freezer ON-OFF control

Approximately 2L

Earth leakage/overcurrent breaker, refrigerator overload relay holding circuit, refrigerator protection timer, temperature controller self-diagnosis function, circulation pump impedance protection, flow rate switch

Maximum flow rate 10/12L/min, maximum head 9.5/13m

One-touch connector inner diameter 10mm, one-touch hose outer diameter 10mm

Communication terminal for evaporator (for N-1210B type)

232 (240) W×490 (505) D×600H

360W (309kcal/h)

740W (636kcal/h)

Air-cooled/closed system directional circulation

Air-cooled output 470W/R407A

5~35℃

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Cooling Water Circulators Products

Other products of Tokyo Rikakikai Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Rikakikai Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree