Rotary evaporator N-1300SF type series
Tokyo Rikakikai Co., Ltd.
About This Product
■Horizontal cooler that allows for highly efficient recovery
The horizontal double spiral condenser can efficiently recover vapor from low to high boiling point substances. The manual weight balance jack allows stepless height adjustment. There is no need to adjust the height of the bath even for small sample containers. The 180mm stroke length allows it to handle large capacity flasks and trap balls.
The glass set is a new design that allows installation and replacement on the left and right sides. The glass set can be positioned freely to suit the installation location and handedness, and space can be used effectively even when two rotary evaporators are installed. The rotation direction and automatic reversal of the flask can be changed by setting the control unit.
If you change to the optional thick-walled rotary joint, you can use sample flasks up to 2L.
■Improved to be even easier to use and equipped with new functions
The glass set can be installed on either the left or right side of the device. When setting up the device, you can consider the space on the bench and your handedness when setting up the device. It is possible to set the direction of flask rotation (forward/reverse rotation). Automatic inversion is also possible, making it effective for drying powders and for drying and concentrating samples containing solids.
The base of the condenser (receiving flask side) has a structure to prevent liquid accumulation. Prevents liquid from pooling in the seal, which tends to occur when using the cooler at an angle. Low and high boiling point substances also come into contact with the cooler at the tip of the rotary joint and can be efficiently collected within the distance to the suction port. A cooler with excellent cooling efficiency.
■Interlocking with vacuum controller NVC type
By connecting to the vacuum controller NVC-3000 type, solvent recovery unit DPE-1150/2150 type, DPE-1250B/C/D/E type, you can control the pressure and at the same time control the rotation speed of the rotary evaporator, bath temperature, cooling water temperature, etc. You can display measured values and change settings (excluding buses).
■F type
There is also an F type (N-1300EF/VF/SF type) type with condenser, adapter, and receiving flask. The coating agent is an environmentally friendly polyurethane that is hard to break and has a new composition that prevents glass and samples from scattering even in the event of breakage. This composition has excellent chemical properties and is so transparent that the film cannot be seen.
-
Product
Rotary evaporator N-1300SF type series
-
Handling Company
Tokyo Rikakikai Co., Ltd.
-
Categories
3 Models of Rotary evaporator N-1300SF type series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Bath material/heater/capacity | Bath temperature control range/accuracy | Bus internal dimensions (mm) | Bus safety features | Bus service outlet | Connection diameter | Evaporation capacity | External dimensions (highest position) (mm) | Jack function | Mass | Operating ambient temperature range | Power input/power voltage | Rotating motor | Rotation setting/display | Rotation speed range | SF type glass set Aira coat specification | SF type glass set standard specifications | Vacuum seal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
N-1300SF-W |
Available upon quote | Stainless steel・1.05kW・approx. 4.3L | Room temperature +5~90℃・±1℃ | Inner diameter 220×120H | Fuses, fixed temperature desuperheaters, thermal protection bus covers | Max2A for connecting rotary evaporator main body drive part | Cooling water nozzle/suction nozzle outer diameter 10mm | Max.23mL/min (water evaporation amount) | 736W×352D×504 (684)H | Manual balance type (jack stroke 180mm, stepless adjustment) | 12.1kg | 5~35℃ | 11.6A, 1.16kVA・AC100V 50/60Hz | Dc brushless motor | Encoder type digital display/digital display | 10~310rpm | Vertical double helical tube, adapter, receiving flask (round bottom) 1L (ball-printed S35/20) | Rotary joint (inner diameter 18 x total length 178 mm, 29/38), sample flask (eggplant type) 1L (29/30) | Teflon® + Teflon®/Viton double seal (genuine parts: 2 sets of vacuum seals) | |
N-1300SF-WS |
Available upon quote | Stainless steel, 950W, approximately 4.3L | Room temperature +5~80℃・±1℃ | 220W×179D×120H | Dry cooking prevention device (float switch), fixed temperature overheating prevention device (temperature fixed/liquid expansion manual reset type), dedicated bus detector, fuse, heat insulation protection bus cover, self-diagnosis function (sensor disconnection/short alarm, etc.) | Max2A for connecting rotary evaporator main body drive part | Cooling water nozzle/suction nozzle outer diameter 10mm | Max.23mL/min (water evaporation amount) | 736W×374D×504 (684)H | Manual balance type (jack stroke 180mm, stepless adjustment) | 15.2kg | 5~35℃ | 10.6A, 1.06kVA・AC100V 50/60Hz | Dc brushless motor | Encoder type digital display/digital display | 10~310rpm | Vertical double helical tube, adapter, receiving flask (round bottom) 1L (ball-printed S35/20) | Rotary joint (inner diameter 18 x total length 178 mm, 29/38), sample flask (eggplant type) 1L (29/30) | Teflon® + Teflon®/Viton double seal (genuine parts: 2 sets of vacuum seals) | |
N-1300SF-WB |
Available upon quote | Aluminum (Teflon® coating) ・1kW・Approx. 5.4L | Room temperature +5~180℃・±1℃ | Inner diameter 240×120H | Fuses, fixed temperature desuperheaters, thermal protection bus covers | Max2A for connecting rotary evaporator main body drive part | Cooling water nozzle/suction nozzle outer diameter 10mm | Max.23mL/min (water evaporation amount) | 724W×352D×504 (684)H | Manual balance type (jack stroke 180mm, stepless adjustment) | 12.7kg | 5~35℃ | 11.1A, 1.11kVA・AC100V 50/60Hz | Dc brushless motor | Encoder type digital display/digital display | 10~310rpm | Vertical double helical tube, adapter, receiving flask (round bottom) 1L (ball-printed S35/20) | Rotary joint (inner diameter 18 x total length 178 mm, 29/38), sample flask (eggplant type) 1L (29/30) | Teflon® + Teflon®/Viton double seal (genuine parts: 2 sets of vacuum seals) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Tokyo Rikakikai Co., Ltd.
View more products of Tokyo Rikakikai Co., Ltd.
