All Categories

History

Rotary evaporator N-1300SF
Tokyo Rikakikai Co., Ltd.

Tokyo Rikakikai Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

42.2hours


About This Product

■Horizontal cooler that allows for highly efficient recovery

The horizontal double spiral condenser can efficiently recover vapor from low to high boiling point substances. The manual weight balance jack allows stepless height adjustment. There is no need to adjust the height of the bath even for small sample containers. The 180mm stroke length allows it to handle large capacity flasks and trap balls. The glass set is a new design that allows installation and replacement on the left and right sides. The glass set can be positioned freely to suit the installation location and handedness, and space can be used effectively even when two rotary evaporators are installed. The rotation direction and automatic reversal of the flask can be changed by setting the control unit. If you change to the optional thick-walled rotary joint, you can use sample flasks up to 2L.

■Improved to be even easier to use and equipped with new functions

The glass set can be installed on either the left or right side of the device. When setting up the device, you can consider the space on the bench and your handedness when setting up the device. It is possible to set the direction of flask rotation (forward/reverse rotation). Automatic inversion is also possible, making it effective for drying powders and for drying and concentrating samples containing solids. The base of the condenser (receiving flask side) has a structure to prevent liquid accumulation. Prevents liquid from pooling in the seal, which tends to occur when using the cooler at an angle. Low and high boiling point substances also come into contact with the cooler at the tip of the rotary joint and can be efficiently collected within the distance to the suction port. A cooler with excellent cooling efficiency.

■Interlocking with vacuum controller NVC type

By connecting to the vacuum controller NVC-3000 type, solvent recovery unit DPE-1150/2150 type, DPE-1250B/C/D/E type, you can control the pressure and at the same time control the rotation speed of the rotary evaporator, bath temperature, cooling water temperature, etc. You can display measured values ​​and change settings (excluding buses).

■F type

There is also an F type (N-1300EF/VF/SF type) type with condenser, adapter, and receiving flask. The coating agent is an environmentally friendly polyurethane that is hard to break and has a new composition that prevents glass and samples from scattering even in the event of breakage. This composition has excellent chemical properties and is so transparent that the film cannot be seen. F-type bathless with glass protective coating (EYELACOAT®) with excellent chemical resistance, transparency, cold resistance (-80℃), and heat resistance (120℃)

  • Product

    Rotary evaporator N-1300SF

Share this product


100+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Rotary evaporator N-1300SF

Image Part Number Price (excluding tax) Power input/power voltage Mass Evaporation capacity Vacuum seal Connection diameter External dimensions (highest position) (mm) Rotation speed range Rotation setting/display Rotating motor Operating ambient temperature range Jack function SF type glass set standard specifications SF type glass set Aira coat specification

N-1300SF

Available upon quote

1.1A, 110VA・AC100V 50/60Hz

8.2kg

Max.23mL/min (water evaporation amount)

Teflon® + Teflon®/Viton double seal (genuine parts: 2 sets of vacuum seals)

Cooling water nozzle/suction nozzle outer diameter 10mm

672W×342D×504 (684)H

10~310rpm

Encoder type digital display/digital display

Dc brushless motor

5~35℃

Manual balance type (jack stroke 180mm, stepless adjustment)

Rotary joint (inner diameter 18 x total length 178 mm, 29/38), sample flask (eggplant type) 1L (29/30)

Vertical double helical tube, adapter, receiving flask (round bottom) 1L (ball-printed S35/20)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Rotary Evaporators Products

Other products of Tokyo Rikakikai Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Rikakikai Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

42.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree