All Categories

History

Rotary evaporator N-1300VF type series
Tokyo Rikakikai Co., Ltd.

Tokyo Rikakikai Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

41.4hours


About This Product

■Suitable for small to large capacity sample flasks

The cooling area of ​​the vertical condenser (0.146 m2) provides excellent recovery from small volume flasks to large volumes. If you change to the optional thick-walled rotary joint, you can use sample flasks up to 2L. The glass set is a new design that allows installation and replacement on the left and right sides. The glass set can be positioned freely to suit the installation location and handedness, and space can be used effectively even when two rotary evaporators are installed. Since the position of the condenser is shifted, there is no need to worry about the concentrated liquid from the condenser flowing back into the sample flask through the capillary or rotary joint. The rotation direction of the flask and automatic reversal are possible by setting the control unit.

■Improved to be even easier to use and equipped with new functions

The glass set can be installed on either the left or right side of the device. When setting up the device, you can consider the space on the bench and your handedness when setting up the device. It is possible to set the direction of flask rotation (forward/reverse rotation). Automatic inversion is also possible, making it effective for drying powders and for drying and concentrating samples containing solids. The base of the condenser (receiving flask side) has a structure to prevent liquid accumulation. Prevents liquid from pooling in the seal area and causing irritation when using the cooler at an angle. Since the condenser mounting position of the adapter is shifted from the capillary, there is no worry that the concentrated liquid from the condenser will flow back into the sample flask through the capillary tube.

■Interlocking with vacuum controller NVC type

By connecting to the vacuum controller NVC-3000 type, solvent recovery unit DPE-1150/2150 type, DPE-1250B/C/D/E type, you can simultaneously control the pressure and control the rotation speed of the rotary evaporator, bath temperature, cooling water temperature, etc. You can display measured values ​​and change settings (excluding buses).

■Features of the N-1300VF series

It is coated with a glass protective coating (Iracoat) that has excellent chemical resistance, transparency, cold resistance (-80℃), and heat resistance (120℃). VF type glass set

■Islay coat specifications

Vertical double serpentine tube, adapter, receiving flask (round bottom) 1L (ball-printed S35/20)

■ Standard specifications

Rotary joint (inner diameter 18 x total length 178 mm, 29/38), sample flask (eggplant type) 1L (29/30)

  • Product

    Rotary evaporator N-1300VF type series

Share this product


160+ people viewing

Last viewed: 4 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

3 Models of Rotary evaporator N-1300VF type series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power input/power voltage Mass Evaporation capacity Vacuum seal Connection diameter External dimensions (highest position) (mm) Rotation speed range Rotation setting/display Rotating motor Operating ambient temperature range Bus type Jack function

N-1300VF

Available upon quote

1.1A, 110VA・AC100V 50/60Hz

8.9kg

Max.23mL/min (water evaporation amount)

Vacuum seal (Teflon® + Teflon®/Viton double seal) 1 set
Genuine parts: 2 sets of vacuum seals

Cooling water nozzle/exhaust nozzle outer diameter 10mm

479W×342D×785 (965) H

10~310rpm

Dial type setting value input/digital display

Dc brushless motor

5~35℃

No bus

Manual balance type (jack stroke 180mm, stepless adjustment)

N-1300VF-W

Available upon quote

1.1A, 110VA・AC100V 50/60Hz

8.9kg

Max.23mL/min (water evaporation amount)

Vacuum seal (Teflon® + Teflon®/Viton double seal) 1 set
Genuine parts: 2 sets of vacuum seals

Cooling water nozzle/exhaust nozzle outer diameter 10mm

479W×342D×785 (965) H

10~310rpm

Dial type setting value input/digital display

Dc brushless motor

5~35℃

With water bath

Manual balance type (jack stroke 180mm, stepless adjustment)

N-1300VF-WB

Available upon quote

1.1A, 110VA・AC100V 50/60Hz

8.9kg

Max.23mL/min (water evaporation amount)

Vacuum seal (Teflon® + Teflon®/Viton double seal) 1 set
Genuine parts: 2 sets of vacuum seals

Cooling water nozzle/exhaust nozzle outer diameter 10mm

479W×342D×785 (965) H

10~310rpm

Dial type setting value input/digital display

Dc brushless motor

5~35℃

With water/oil bath

Manual balance type (jack stroke 180mm, stepless adjustment)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Rotary Evaporators Products

Other products of Tokyo Rikakikai Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Rikakikai Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

41.4hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree