Rotary evaporator N-1300V type series
Tokyo Rikakikai Co., Ltd.
About This Product
■Suitable for small to large capacity sample flasks
The cooling area of the vertical condenser (0.146 m2) provides excellent recovery from small volume flasks to large volumes. If you change to the optional thick-walled rotary joint, you can use sample flasks up to 2L.
The glass set is a new design that allows installation and replacement on the left and right sides. The glass set can be positioned freely to suit the installation location and handedness, and space can be used effectively even when two rotary evaporators are installed. Since the position of the condenser is shifted, there is no need to worry about the concentrated liquid from the condenser flowing back into the sample flask through the capillary or rotary joint. The rotation direction of the flask and automatic reversal are possible by setting the control unit.
■Improved to be even easier to use and equipped with new functions
The glass set can be installed on either the left or right side of the device. When setting up the device, you can consider the space on the bench and your handedness when setting up the device. It is possible to set the direction of flask rotation (forward/reverse rotation). Automatic inversion is also possible, making it effective for drying powders and for drying and concentrating samples containing solids. The base of the condenser (receiving flask side) has a structure to prevent liquid accumulation. Prevents liquid from pooling in the seal area and causing irritation when using the cooler at an angle.
Since the condenser mounting position of the adapter is shifted from the capillary, there is no worry that the concentrated liquid from the condenser will flow back into the sample flask through the capillary tube.
■Interlocking with vacuum controller NVC type
By connecting to the vacuum controller NVC-3000 type, solvent recovery unit DPE-1150/2150 type, DPE-1250B/C/D/E type, you can simultaneously control the pressure and control the rotation speed of the rotary evaporator, bath temperature, cooling water temperature, etc. You can display measured values and change settings (excluding buses).
■Features of N-1300V type (glass set)
The V type is equipped with a vertical double spiral condenser. This unique design prevents the condensate in the cooler from flowing back into the sample flask through the capillary. It is effective for concentrating analytical samples, etc., where contamination is avoided.
-
Product
Rotary evaporator N-1300V type series
-
Handling Company
Tokyo Rikakikai Co., Ltd.
-
Categories
4 Models of Rotary evaporator N-1300V type series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Bus type | Connection diameter | Evaporation capacity | External dimensions (highest position) (mm) | Jack function | Mass | Operating ambient temperature range | Power input/power voltage | Rotating motor | Rotation setting/display | Rotation speed range | V type glass set | Vacuum seal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
N-1300V |
Available upon quote | No bus | Cooling water nozzle/suction nozzle outer diameter 10mm | Max.23mL/min (water evaporation amount) | 479W×342D×785 (965) H | Manual balance type (jack stroke 180mm, stepless adjustment) | 8.9kg | 5~35℃ | 1.1A, 110VA・AC100V 50/60Hz | Dc brushless motor | Encoder type digital display/digital display | 10~310rpm | Vertical double serpentine tube (cooling area 0.146m2), adapter, rotary joint (inner diameter 18 x total length 178mm, 29/38), sample flask (eggplant type) 1L (29/38), receiving flask (round bottom) 1L | Teflon® + Teflon®/Viton double seal (genuine parts: 2 sets of vacuum seals) |
|
|
N-1300V-W |
Available upon quote | With water bath | Cooling water nozzle/suction nozzle outer diameter 10mm | Max.23mL/min (water evaporation amount) | 543W×352D×785 (965) H | Manual balance type (jack stroke 180mm, stepless adjustment) | 12.8kg | 5~35℃ | 11.6A, 1.16kVA・AC100V 50/60Hz | Dc brushless motor | Encoder type digital display/digital display | 10~310rpm | Vertical double serpentine tube (cooling area 0.146m2), adapter, rotary joint (inner diameter 18 x total length 178mm, 29/38), sample flask (eggplant type) 1L (29/38), receiving flask (round bottom) 1L | Teflon® + Teflon®/Viton double seal (genuine parts: 2 sets of vacuum seals) |
|
|
N-1300V-WS |
Available upon quote | Comes with water bath + many safety features | Cooling water nozzle/suction nozzle outer diameter 10mm | Max.23mL/min (water evaporation amount) | 543W×374D×785 (965)H | Manual balance type (jack stroke 180mm, stepless adjustment) | 15.9kg | 5~35℃ | 10.6A, 1.06kVA・AC100V 50/60Hz | Dc brushless motor | Encoder type digital display/digital display | 10~310rpm | Vertical double serpentine tube (cooling area 0.146m2), adapter, rotary joint (inner diameter 18 x total length 178mm, 29/38), sample flask (eggplant type) 1L (29/38), receiving flask (round bottom) 1L | Teflon® + Teflon®/Viton double seal (genuine parts: 2 sets of vacuum seals) |
|
|
N-1300V-WB |
Available upon quote | With water/oil bath | Cooling water nozzle/suction nozzle outer diameter 10mm | Max.23mL/min (water evaporation amount) | 543W×352D×785 (965) H | Manual balance type (jack stroke 180mm, stepless adjustment) | 13.4kg | 5~35℃ | 11.1A, 1.111kVA・AC100V 50/60Hz | Dc brushless motor | Encoder type digital display/digital display | 10~310rpm | Vertical double serpentine tube (cooling area 0.146m2), adapter, rotary joint (inner diameter 18 x total length 178mm, 29/38), sample flask (eggplant type) 1L (29/38), receiving flask (round bottom) 1L | Teflon® + Teflon®/Viton double seal (genuine parts: 2 sets of vacuum seals) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Tokyo Rikakikai Co., Ltd.
View more products of Tokyo Rikakikai Co., Ltd.
