All Categories

History

Rotary evaporator N-1300EF
Tokyo Rikakikai Co., Ltd.

Tokyo Rikakikai Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

41.4hours


About This Product

■Space-saving design of depth 342 x height 645mm

The height has been kept to 645mm in consideration of use in a draft chamber. Compact design allows multiple units to be installed even in a draft chamber. The rotation direction and automatic reversal of the flask can be changed by setting the control unit. The glass set is a new design that allows installation and replacement on the left and right sides. The glass set can be positioned freely according to the installation location and handedness. Since the position of the condenser is shifted, there is no need to worry about condensate from the condenser flowing through the capillary or rotary joint and flowing back into the sample flask. The cooler has a cooling capacity that can be used for sample flasks up to 1L.

■Improved to be even easier to use and equipped with new functions

The glass set can be installed on either the left or right side of the device. When setting up the device, you can consider the space on the bench and your handedness when setting up the device. It is possible to set the direction of flask rotation (forward/reverse rotation). Automatic inversion is also possible, making it effective for drying powders and for drying and concentrating samples containing solids. The base of the condenser (receiving flask side) has a structure to prevent liquid accumulation. Prevents liquid from pooling in the seal area and causing irritation when using the cooler at an angle. The jack can be adjusted steplessly. It can be fixed in any position according to the sample container. It is also easier to operate when using trap balls.

■Interlocking with vacuum controller NVC type

By connecting to the vacuum controller NVC-3000 type, solvent recovery unit DPE-1150/2150 type, DPE-1250B/C/D/E type, you can simultaneously control the pressure and control the rotation speed of the rotary evaporator, bath temperature, cooling water temperature, etc. You can display measured values ​​and change settings (excluding buses).

■Features of N-1300E type (glass set)

The E type is equipped with a compact type cooler with an integrated adapter. The shape is designed to be used in a fume hood, and the unique design prevents the condensate in the cooler from flowing back through the capillary and back into the sample flask.

■F type

There is also an F type (N-1300EF/VF/SF type) type with condenser, adapter, and receiving flask. The coating agent is an environmentally friendly polyurethane that is hard to break and has a new composition that prevents glass and samples from scattering even in the event of breakage. This composition has excellent chemical properties and is so transparent that the film cannot be seen.

  • Product

    Rotary evaporator N-1300EF

Share this product


90+ people viewing

Last viewed: 16 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Rotary evaporator N-1300EF

Image Part Number Price (excluding tax) Power input/power voltage Mass Evaporation capacity Vacuum seal Connection diameter External dimensions (highest position) (mm) Rotation speed range Rotation setting/display Rotating motor Operating ambient temperature range Bus type Jack function EF type glass set, standard specification EF type glass set, Aira coat specification

N-1300EF

Available upon quote

1.1A, 110VA・AC100V 50/60Hz

8.8kg

Max.23mL/min (water evaporation amount)

Vacuum seal (Teflon® + Teflon®/Viton double seal) 1 set
Genuine parts: 2 sets of vacuum seals

Cooling water nozzle/exhaust nozzle outer diameter 10mm

514W×342D×645 (825)H

10~310rpm

Dial type setting value input/digital display

Dc brushless motor

5~35℃

No bus

Manual balance type (jack stroke 180mm, stepless adjustment)

Rotary joint (inner diameter 18 x total length 178 mm), sample flask (eggplant type) 1L,

Vertical double serpentine tube with integrated adapter (cooling area 0.117m2), receiving flask (round bottom) 1L (ball-printed S35/20)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Rotary Evaporators Products

Other products of Tokyo Rikakikai Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Rikakikai Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

41.4hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree