Rotary evaporator N-1300E series
Tokyo Rikakikai Co., Ltd.
About This Product
■Space-saving design of depth 342 x height 645mm
The height has been kept to 645mm in consideration of use in a draft chamber. Compact design allows multiple units to be installed even in a draft chamber. The rotation direction and automatic reversal of the flask can be changed by setting the control unit.
The glass set is a new design that allows installation and replacement on the left and right sides. The glass set can be positioned freely according to the installation location and handedness. Since the position of the condenser is shifted, there is no need to worry about condensate from the condenser flowing through the capillary or rotary joint and flowing back into the sample flask.
The cooler has a cooling capacity that can be used for sample flasks up to 1L.
■Improved to be even easier to use and equipped with new functions
The glass set can be installed on either the left or right side of the device. When setting up the device, you can consider the space on the bench and your handedness when setting up the device. It is possible to set the direction of flask rotation (forward/reverse rotation). Automatic inversion is also possible, making it effective for drying powders and for drying and concentrating samples containing solids.
The base of the condenser (receiving flask side) has a structure to prevent liquid accumulation. Prevents liquid from pooling in the seal area and causing irritation when using the cooler at an angle. The jack can be adjusted steplessly. It can be fixed in any position according to the sample container. It is also easier to operate when using trap balls.
■Interlocking with vacuum controller NVC type
By connecting to the vacuum controller NVC-3000 type, solvent recovery unit DPE-1150/2150 type, DPE-1250B/C/D/E type, you can simultaneously control the pressure and control the rotation speed of the rotary evaporator, bath temperature, cooling water temperature, etc. You can display measured values and change settings (excluding buses).
■Features of N-1300E type (glass set)
The E type is equipped with a compact type cooler with an integrated adapter. The shape is designed to be used in a fume hood, and the unique design prevents the condensate in the cooler from flowing back through the capillary and back into the sample flask.
-
Product
Rotary evaporator N-1300E series
-
Handling Company
Tokyo Rikakikai Co., Ltd.
-
Categories
4 Models of Rotary evaporator N-1300E series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Bath temperature control range/accuracy | Bus internal dimensions (mm) Bus material/bus capacity | Bus safety features | Bus service outlet | Bus type | Connection diameter | E type glass set | Evaporation capacity | External dimensions (highest position) (mm) | Heater | Jack function | Mass | Operating ambient temperature range | Power input/power voltage | Rotating motor | Rotation setting/display | Rotation speed range | Vacuum seal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
N-1300E |
Available upon quote | - | - | - | - | No bus | Cooling water nozzle/exhaust nozzle outer diameter 10mm | Vertical double serpentine tube with built-in adapter (cooling area 0.117m2), rotary joint (inner diameter 18 x total length 178mm), sample flask (eggplant type) 1L, receiving flask (round bottom) 1L (ball machining) | Max.23mL/min (water evaporation amount) | 514W×342D×645 (825)H | - | Manual balance type (jack stroke 180mm, stepless adjustment) | 8.8kg | 5~35℃ | 1.1A, 110VA・AC100V 50/60Hz | Dc brushless motor | Dial type setting value input/digital display | 10~310rpm |
Vacuum seal (Teflon® + Teflon®/Viton double seal) 1 set Genuine parts: 2 sets of vacuum seals |
|
|
N-1300E-W |
Available upon quote | Room temperature +5~90℃・±1℃ | Inner diameter 220 x 120H, stainless steel, approximately 4.3L | Fuse, fixed temperature overheat protector, thermal protection bus cover | For connecting the evaporator main body drive unit Max.2A | With water bath | Cooling water nozzle/exhaust nozzle outer diameter 10mm | Vertical double serpentine tube with built-in adapter (cooling area 0.117m2), rotary joint (inner diameter 18 x total length 178mm), sample flask (eggplant type) 1L, receiving flask (round bottom) 1L (ball machining) | Max.23mL/min (water evaporation amount) | 578W×352D×645 (825)H | 1.05kW | Manual balance type (jack stroke 180mm, stepless adjustment) | 12.7kg | 5~35℃ | 11.6A, 1.16kVA・AC100V 50/60Hz | Dc brushless motor | Dial type setting value input/digital display | 10~310rpm |
Vacuum seal (Teflon® + Teflon®/Viton double seal) 1 set Genuine parts: 2 sets of vacuum seals |
|
|
N-1300E-WS |
Available upon quote | Room temperature +5~80℃・±1℃ | Inner diameter 220 x 120H, stainless steel, approximately 4.3L | Dry firing prevention device (float switch), fixed temperature overheating prevention device (temperature fixed/liquid expansion type manual reset type), dedicated bus detector, fuse, heat insulation protection bus cover, self-diagnosis function (sensor disconnection/short alarm, etc.) | For connecting the evaporator main body drive unit Max.2A | Comes with water bath + many safety features | Cooling water nozzle/exhaust nozzle outer diameter 10mm | Vertical double serpentine tube with built-in adapter (cooling area 0.117m2), rotary joint (inner diameter 18 x total length 178mm), sample flask (eggplant type) 1L, receiving flask (round bottom) 1L (ball machining) | Max.23mL/min (water evaporation amount) | 578W×374D×645 (825) H | 950W | Manual balance type (jack stroke 180mm, stepless adjustment) | 12.7kg | 5~35℃ | 11.6A, 1.16kVA・AC100V 50/60Hz | Dc brushless motor | Dial type setting value input/digital display | 10~310rpm |
Vacuum seal (Teflon® + Teflon®/Viton double seal) 1 set Genuine parts: 2 sets of vacuum seals |
|
|
N-1300E-WB |
Available upon quote | Room temperature +5~180℃・±1.5℃ (Oil: ±3℃) | Inner diameter 240 x 120H, stainless steel, approximately 5L | Fuse, fixed temperature overheat protector, thermal protection bus cover | For connecting the evaporator main body drive unit Max.2A | With water/oil bath | Cooling water nozzle/exhaust nozzle outer diameter 10mm | Vertical double serpentine tube with built-in adapter (cooling area 0.117m2), rotary joint (inner diameter 18 x total length 178mm), sample flask (eggplant type) 1L, receiving flask (round bottom) 1L (ball machining) | Max.23mL/min (water evaporation amount) | 565W×352D×645 (825)H | 950W | Manual balance type (jack stroke 180mm, stepless adjustment) | 13.3kg | 5~35℃ | 11.1A, 1.11kVA・AC100V 50/60Hz | Dc brushless motor | Dial type setting value input/digital display | 10~310rpm |
Vacuum seal (Teflon® + Teflon®/Viton double seal) 1 set Genuine parts: 2 sets of vacuum seals |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Tokyo Rikakikai Co., Ltd.
View more products of Tokyo Rikakikai Co., Ltd.
