Shot count monitor SCM-044A
Ram Technologies LLC

About This Product

This is a special machine that easily prevents the leakage of defective products that have been forgotten to be welded. By sensing the welding current during processing, the number of welding points is counted up, and when the number of welding points is set, an alarm sounds and an LED blinks to notify the operator of completion.

By monitoring the number of dots on all products at the welding site, we prevent defective products from flowing into downstream processes. When setting dots, it is necessary to press the reset button when the product is completed, but by placing a small reset box close to the worker, the burden can be kept to a minimum. Even if the worker becomes distracted, they can recognize when the product is complete by pressing the reset button. (Patent No. 7176746)

■Series contents・Shot count monitor body (SCM-044A 1 unit)
・Reset box (RB-01A-2m 1 piece)
・Sensor (MS-01A-2m 4 pieces)

■What is shot count monitor?This is a device that counts the dots of spot welding and notifies the operator of the set dots. Since it detects the processing current and counts the welding points, it can be installed even with older welding machines. By setting the setting point, you can also manage the production quantity. By setting the specified production quantity, you can prevent overproduction.

■Easy installation Free placementEasy to install on your welding machine with magnetic feet. To place the sensor, attach the included wiring fixing base to the welding current conductor and secure it with a bundled wire band. Connect the AC power, set the number of dots, and you are ready.

*The TIME setting may need to be adjusted depending on the welding conditions and welding machine. The neodymium magnetic foot allows for easy relocation, which often changes depending on the work being done.

■Strengthening quality control measuresThe spillage of products with insufficient welding points can lead to extremely large losses. This is a very important element in maintaining product reliability and quality. If it is discovered that there are insufficient dots after the assembly process has progressed, it will lead to even greater losses.

■For low-volume, high-mix, 4M measuresRepetition of simple tasks induces human error. Even if you are a seasoned worker, there is no guarantee that no accidents will occur. The number of dots and products can be counted and displayed by sensing the actual processing current, allowing real-time monitoring during welding work. It is possible to manage the dots of the welding machine in use without having to replace the welding machine or change production conditions. Since there is no need to review production conditions, it will be effective at the processing site immediately after introduction.

Model
There are 1 models for this product.

Product
Shot count monitor SCM-044A

Handling Company
Ram Technologies LLC

Categories

Meters & Instruments

Counters

Meters & Instruments

Preset Counters

170+ people viewing

Last viewed: 12 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Shot count monitor SCM-044A

Image	Part Number	Price (excluding tax)	Reset box maximum beep volume	Reset box cable length	Reset switch	Monitor body counter display/setting range	Sensor minimum pulse width	Sensor sensing current	Sensor Sensor cable length Sensor	Shot count monitor weight	Shot count monitor body display	Shot count monitor body Minimum sensing signal time	Shot count monitor body Maximum detection signal time	Shot count monitor body Rated voltage/frequency	Shot count monitor body Number of sensor input ports
	SCM-044A	Available upon quote	2k Hz 78dB or more	2m (standard)	LED illuminated switch	0~9,999 (SHOT) (a~d each) 0~9,999 (LOT)	1mSEC (2mSEC)	500A or more (1000A or more)	2m standard	1kg	Nanasegu red LED and LED	1mSEC (when using attached sensor)	3 seconds (when TIME setting is 3 seconds)	100-220V±10% / 50-60Hz	4 (a,b,c,d)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Counter to prevent forgetting to tighten screws NEJISTARσ

Koyama Co., Ltd.

5.0

120+ people viewing

Last viewed: 9 hours ago

Response time: 24.23 hours

Counters

4 models listed

Prevents forgetting to tighten screws & traceable counter TORQUEWISH KH-5000-H (K)

Koyama Co., Ltd.

5.0

170+ people viewing

Last viewed: 21 hours ago

Response time: 24.23 hours

Counters

3 models listed

Pulse counter with CAN/high speed analog output

Coco Research Co., Ltd.

160+ people viewing

Last viewed: 9 hours ago

Response time: 59.58 hours

Counters

4 models listed

Time Counter Hearmeter Electrometer 891 Series

Fourty ICG Japan Co., Ltd.

660+ people viewing

Last viewed: 5 hours ago

Response time: 2.61 hours

Counters

27 models listed

Automatically counts entry and exit Counter ENEX COUNTER

IMKina Co., Ltd.

$1,287.00

900+ people viewing

Last viewed: 9 hours ago

Response time: 23.08 hours

Counters

9 models listed

Parts counter TY-B100 V2

Takahata Electronics Co., Ltd.

80+ people viewing

Last viewed: 9 hours ago

Counters

2 models listed

Gemba Reporter (site improvement system)

Line Seiki Co., Ltd.

$2,080.00

70+ people viewing

Last viewed: 21 hours ago

Counters

3 models listed

Coin sorting and counting machine DC-11 KANTA

Daito Co., Ltd.

70+ people viewing

Last viewed: 9 hours ago

Counters

4 models listed

99 %+ultra-high accuracy people counter V-COUNT

Telemark Co., Ltd.

520+ people viewing

Last viewed: 3 minutes ago

Response time: 105.87 hours

Counters

6 models listed

Centralized tool exchange counter TCI-9300/9390GⅡ

Takenaka Electric Co., Ltd.

190+ people viewing

Last viewed: 9 hours ago

Response time: 14.39 hours

Counters

6 models listed

Counting separation equipment

30+ people viewing

Last viewed: 9 hours ago

Counters

Coin sorting and counting machine DCV-10 KANTA

Daito Co., Ltd.

70+ people viewing

Last viewed: 9 hours ago

Counters

4 models listed

See More Counters Products

Other products of Ram Technologies LLC

Reviews shown here are reviews of companies.

Simple press equipment management Foot press dot monitoring monitor

Ram Technologies LLC

140+ people viewing

Last viewed: 3 hours ago

2 models listed

View more products of Ram Technologies LLC

About Company Handling This Product

Ram Technologies LLC

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Shot count monitor SCM-044A Ram Technologies LLC

About This Product

■Series contents

■What is shot count monitor?

■Easy installation Free placement

■Strengthening quality control measures

■For low-volume, high-mix, 4M measures

1 Models of Shot count monitor SCM-044A

SCM-044A

Customers who viewed this product also viewed

Other products of Ram Technologies LLC

About Company Handling This Product

Related search keywords

Shot count monitor SCM-044A
Ram Technologies LLC