All Categories

History

Standard long-selling data collection display for production management IRD/IDD series IRD-025 series (single-sided)-IRD-025-34
Standard long-selling data collection display for production management IRD/IDD series IRD-025 series (single-sided)-Icon Co., Ltd.

Standard long-selling data collection display for production management IRD/IDD series IRD-025 series (single-sided)
Icon Co., Ltd.


About This Product

A display device with a variety of display data and functions suitable for a standard production control display that supports any improvement plan. Features

■Complete display functions

- You can freely select and display each display stage from 29 types of display types. With a 3-level display, there are approximately 22,000 combinations. - Even if the management contents change depending on the improvement steps, you can respond by simply changing the settings. ・I sometimes want to check data that is not normally displayed. In such cases, you can view the desired data at any time using commands. ・Since the measurement results of completed plans (Max30 plans) are stored in memory, past results can be checked and displayed using commands from the setting device. This kind of data can be collected

■Number data

Actual number, number of defects, number of stops, etc.

■Time data

Operating time, stop time, setup time, actual takt, etc.

■Calculated data

Progress, remaining quantity, completion rate, operating rate, defective rate, average takt, etc. (Calculated based on the above data and setting values.) Great versatility

■System settings

With 20 settings, you can configure the usage to suit your site.

■Schedule settings

You can set up to 16 categories and 3 patterns for on-site work hours (working hours). This setting allows you to measure working time and resting time separately.

■Product number setting

Set and register the measurement conditions for the product to be produced. Max30 product numbers can be registered.

■Plan settings

This is the setting for the daily production content. Set and register the product number and quantity in the order of production. You can register a Max30 plan.

■Simple settings

While pursuing versatility, we have also taken care to minimize the number of setting items that must be performed. You can also use it in simple ways, such as setting and displaying ``set takt only'' or ``planned quantity only''.

■Useful functions

・Automatic start/clear time ・Wide power supply compatible ・Clock function ・Memory save ・Serial communication

  • Product

    Standard long-selling data collection display for production management IRD/IDD series IRD-025 series (single-sided)

Share this product


190+ people viewing

Last viewed: 7 minutes ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Standard long-selling data collection display for production management IRD/IDD series IRD-025 series (single-sided)

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Communication Brightness Planned number of registrations Visibility distance Display surface Display type Number of display stages Display digits Display characters Display data Clock accuracy Character height External power supply Number of registered product numbers Output items Output specifications Input items Input specifications Memory retention Number of schedule registrations Number of clear time registrations Function
Standard long-selling data collection display for production management IRD/IDD series IRD-025 series (single-sided)-Part Number-IRD-025-34

IRD-025-34

Available upon quote

1 port
Communication standard: RS485
Function: Communication with process data collection software Leader
(Change various settings, obtain measurement results, execute commands, etc.)
Maximum number of connected devices: 30
Maximum total wiring distance approximately 1km

4 levels adjustable

Up to 30 plans

Approximately 10m

One side

Numbers, negative sign, decimal point

3 steps

4 digits

Display LED 7 segment display

Select one type for each row from 29 types of display data (settings can be changed by the user)
Planned number / Target number / Actual number / Progress / Operation rate / Achievement rate / Number of defects / Downtime / Remaining number 1 / Actual takt / Average takt

Less than 1 second/day (AC100V 25℃)

25mm

DC5V120mA max

Up to 30 product numbers

4 points
(During a break/Achieved/Stopped/Delay alarm/Bad alarm/Measuring/
Select 4 items from target pulse/in operation/in setup/takt over)

Open collector output (NPN)
Applied voltage: DC24V max,
Additional voltage: DC100mA (per 1 terminal)
Residual voltage: 0.5V or less

Actual 1, Actual 2 (or external start/stop)
Bad (or target input), subtraction, stop, end, all clear

No voltage input
Impedance during short circuit: 1kΩ or less
Residual voltage during short circuit: 1.5V or less
Outflow current when shorted to 0Ω: Approx. 7mA

More than 1 month after full charge

Maximum of 16 divisions of working time (per pattern) x 3 patterns

Max 3

Data collection/display

Standard long-selling data collection display for production management IRD/IDD series IRD-025 series (single-sided)-Part Number-IRD-025-36

IRD-025-36

Available upon quote

1 port
Communication standard: RS485
Function: Communication with process data collection software Leader
(Change various settings, obtain measurement results, execute commands, etc.)
Maximum number of connected devices: 30
Maximum total wiring distance approximately 1km

4 levels adjustable

Up to 30 plans

Approximately 10m

One side

Numbers, negative sign, decimal point

3 steps

6 digits

Display LED 7 segment display

Select one type for each row from 29 types of display data (settings can be changed by the user)
Planned number / Target number / Actual number / Progress / Operation rate / Achievement rate / Number of defects / Downtime / Remaining number 1 / Actual takt / Average takt

Less than 1 second/day (AC100V 25℃)

25mm

DC5V120mA max

Up to 30 product numbers

4 points
(During a break/Achieved/Stopped/Delay alarm/Bad alarm/Measuring/
Select 4 items from target pulse/in operation/in setup/takt over)

Open collector output (NPN)
Applied voltage: DC24V max,
Additional voltage: DC100mA (per 1 terminal)
Residual voltage: 0.5V or less

Actual 1, Actual 2 (or external start/stop)
Bad (or target input), subtraction, stop, end, all clear

No voltage input
Impedance during short circuit: 1kΩ or less
Residual voltage during short circuit: 1.5V or less
Outflow current when shorted to 0Ω: Approx. 7mA

More than 1 month after full charge

Maximum of 16 divisions of working time (per pattern) x 3 patterns

Max 3

Data collection/display

Click on the part number for more information about each product

Other products of Icon Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Icon Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree