Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)-IRD-100-24

Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)-IRD-100-26

Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)-IRD-100-36

Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)-IRD-100-44

Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)
Icon Co., Ltd.

About This Product

A display device with a variety of display data and functions suitable for a standard production control display that supports any improvement plan.

Features
■Complete display functions- You can freely select and display each display stage from 29 types of display types. With a 3-level display, there are approximately 22,000 combinations.
- Even if the management contents change depending on the improvement steps, you can respond by simply changing the settings.
・I sometimes want to check data that is not normally displayed. In such cases, you can view the desired data at any time using commands.
・Since the measurement results of completed plans (Max30 plans) are stored in memory, past results can be checked and displayed using commands from the setting device.

This kind of data can be collected
■Number dataActual number, number of defects, number of stops, etc.

■Time dataOperating time, stop time, setup time, actual takt, etc.

■Calculated dataProgress, remaining quantity, completion rate, operating rate, defective rate, average takt, etc. (Calculated based on the above data and setting values.)

Great versatility
■System settingsWith 20 settings, you can configure the usage to suit your site.

■Schedule settingsYou can set up to 16 categories and 3 patterns for on-site work hours (working hours). This setting allows you to measure working time and resting time separately.

■Product number settingSet and register the measurement conditions for the product to be produced. Max30 product numbers can be registered.

■Plan settingsThis is the setting for the daily production content. Set and register the product number and quantity in the order of production. You can register a Max30 plan.

■Simple settingsWhile pursuing versatility, we have also taken care to minimize the number of setting items that must be performed. You can also use it in simple ways, such as setting and displaying ``set takt only'' or ``planned quantity only''.

■Useful functions・Automatic start/clear time
・Wide power supply compatible
・Clock function
・Memory save
・Serial communication

Model
There are 6 models for this product.

Product
Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)

Handling Company
Icon Co., Ltd.

290+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Communication	Brightness	Planned number of registrations	Visibility distance	Display surface	Display type	Number of display stages	Display digits	Display characters	Display data	Clock accuracy	Character height	External power supply	Number of registered product numbers	Output items	Output specifications	Input items	Input specifications	Memory retention	Number of schedule registrations	Number of clear time registrations	Function
IRD-100-24	Available upon quote	1 port Communication standard: RS485 Function: Communication with process data collection software Leader (Change various settings, obtain measurement results, execute commands, etc.) Maximum number of connected devices: 30 Maximum total wiring distance approximately 1km	4 levels adjustable	Up to 30 plans	35m	One side	Numbers, negative sign, decimal point	2 tiers	4 digits	Display LED 7 segment display	Select one type for each row from 29 types of display data (settings can be changed by the user) Planned number / Target number / Actual number / Progress / Operation rate / Achievement rate / Number of defects / Downtime / Remaining number 1 / Actual takt / Average takt	Less than 1 second/day (AC100V 25℃)	100mm	DC12V 120mA max,	Up to 30 product numbers	4 points (During a break/Achieved/Stopped/Delay alarm/Bad alarm/Measuring/ Select 4 items from target pulse/in operation/in setup/takt over)	Open collector output (NPN) Applied voltage: DC24V max, Additional voltage: DC100mA (per 1 terminal) Residual voltage: 0.5V or less	Actual 1, Actual 2 (or external start/stop) Bad (or target input), subtraction, stop, end, all clear	No voltage input Impedance during short circuit: 1kΩ or less Residual voltage during short circuit: 1.5V or less Outflow current when shorted to 0Ω: Approx. 7mA	More than 1 month after full charge	Maximum of 16 divisions of working time (per pattern) x 3 patterns	Max 3	Data collection/display
IRD-100-26	Available upon quote	1 port Communication standard: RS485 Function: Communication with process data collection software Leader (Change various settings, obtain measurement results, execute commands, etc.) Maximum number of connected devices: 30 Maximum total wiring distance approximately 1km	4 levels adjustable	Up to 30 plans	35m	One side	Numbers, negative sign, decimal point	2 tiers	6 digits	Display LED 7 segment display	Select one type for each row from 29 types of display data (settings can be changed by the user) Planned number / Target number / Actual number / Progress / Operation rate / Achievement rate / Number of defects / Downtime / Remaining number 1 / Actual takt / Average takt	Less than 1 second/day (AC100V 25℃)	100mm	DC12V 120mA max,	Up to 30 product numbers	4 points (During a break/Achieved/Stopped/Delay alarm/Bad alarm/Measuring/ Select 4 items from target pulse/in operation/in setup/takt over)	Open collector output (NPN) Applied voltage: DC24V max, Additional voltage: DC100mA (per 1 terminal) Residual voltage: 0.5V or less	Actual 1, Actual 2 (or external start/stop) Bad (or target input), subtraction, stop, end, all clear	No voltage input Impedance during short circuit: 1kΩ or less Residual voltage during short circuit: 1.5V or less Outflow current when shorted to 0Ω: Approx. 7mA	More than 1 month after full charge	Maximum of 16 divisions of working time (per pattern) x 3 patterns	Max 3	Data collection/display
IRD-100-34	Available upon quote	1 port Communication standard: RS485 Function: Communication with process data collection software Leader (Change various settings, obtain measurement results, execute commands, etc.) Maximum number of connected devices: 30 Maximum total wiring distance approximately 1km	4 levels adjustable	Up to 30 plans	35m	One side	Numbers, negative sign, decimal point	3 steps	4 digits	Display LED 7 segment display	Select one type for each row from 29 types of display data (settings can be changed by the user) Planned number / Target number / Actual number / Progress / Operation rate / Achievement rate / Number of defects / Downtime / Remaining number 1 / Actual takt / Average takt	Less than 1 second/day (AC100V 25℃)	100mm	DC12V 120mA max,	Up to 30 product numbers	4 points (During a break/Achieved/Stopped/Delay alarm/Bad alarm/Measuring/ Select 4 items from target pulse/in operation/in setup/takt over)	Open collector output (NPN) Applied voltage: DC24V max, Additional voltage: DC100mA (per 1 terminal) Residual voltage: 0.5V or less	Actual 1, Actual 2 (or external start/stop) Bad (or target input), subtraction, stop, end, all clear	No voltage input Impedance during short circuit: 1kΩ or less Residual voltage during short circuit: 1.5V or less Outflow current when shorted to 0Ω: Approx. 7mA	More than 1 month after full charge	Maximum of 16 divisions of working time (per pattern) x 3 patterns	Max 3	Data collection/display
IRD-100-36	Available upon quote	1 port Communication standard: RS485 Function: Communication with process data collection software Leader (Change various settings, obtain measurement results, execute commands, etc.) Maximum number of connected devices: 30 Maximum total wiring distance approximately 1km	4 levels adjustable	Up to 30 plans	35m	One side	Numbers, negative sign, decimal point	3 steps	6 digits	Display LED 7 segment display	Select one type for each row from 29 types of display data (settings can be changed by the user) Planned number / Target number / Actual number / Progress / Operation rate / Achievement rate / Number of defects / Downtime / Remaining number 1 / Actual takt / Average takt	Less than 1 second/day (AC100V 25℃)	100mm	DC12V 120mA max,	Up to 30 product numbers	4 points (During a break/Achieved/Stopped/Delay alarm/Bad alarm/Measuring/ Select 4 items from target pulse/in operation/in setup/takt over)	Open collector output (NPN) Applied voltage: DC24V max, Additional voltage: DC100mA (per 1 terminal) Residual voltage: 0.5V or less	Actual 1, Actual 2 (or external start/stop) Bad (or target input), subtraction, stop, end, all clear	No voltage input Impedance during short circuit: 1kΩ or less Residual voltage during short circuit: 1.5V or less Outflow current when shorted to 0Ω: Approx. 7mA	More than 1 month after full charge	Maximum of 16 divisions of working time (per pattern) x 3 patterns	Max 3	Data collection/display
IRD-100-44	Available upon quote	1 port Communication standard: RS485 Function: Communication with process data collection software Leader (Change various settings, obtain measurement results, execute commands, etc.) Maximum number of connected devices: 30 Maximum total wiring distance approximately 1km	4 levels adjustable	Up to 30 plans	35m	One side	Numbers, negative sign, decimal point	4 steps	4 digits	Display LED 7 segment display	Select one type for each row from 29 types of display data (settings can be changed by the user) Planned number / Target number / Actual number / Progress / Operation rate / Achievement rate / Number of defects / Downtime / Remaining number 1 / Actual takt / Average takt	Less than 1 second/day (AC100V 25℃)	100mm	DC12V 120mA max,	Up to 30 product numbers	4 points (During a break/Achieved/Stopped/Delay alarm/Bad alarm/Measuring/ Select 4 items from target pulse/in operation/in setup/takt over)	Open collector output (NPN) Applied voltage: DC24V max, Additional voltage: DC100mA (per 1 terminal) Residual voltage: 0.5V or less	Actual 1, Actual 2 (or external start/stop) Bad (or target input), subtraction, stop, end, all clear	No voltage input Impedance during short circuit: 1kΩ or less Residual voltage during short circuit: 1.5V or less Outflow current when shorted to 0Ω: Approx. 7mA	More than 1 month after full charge	Maximum of 16 divisions of working time (per pattern) x 3 patterns	Max 3	Data collection/display
IRD-100-46	Available upon quote	1 port Communication standard: RS485 Function: Communication with process data collection software Leader (Change various settings, obtain measurement results, execute commands, etc.) Maximum number of connected devices: 30 Maximum total wiring distance approximately 1km	4 levels adjustable	Up to 30 plans	35m	One side	Numbers, negative sign, decimal point	4 steps	6 digits	Display LED 7 segment display	Select one type for each row from 29 types of display data (settings can be changed by the user) Planned number / Target number / Actual number / Progress / Operation rate / Achievement rate / Number of defects / Downtime / Remaining number 1 / Actual takt / Average takt	Less than 1 second/day (AC100V 25℃)	100mm	DC12V 120mA max,	Up to 30 product numbers	4 points (During a break/Achieved/Stopped/Delay alarm/Bad alarm/Measuring/ Select 4 items from target pulse/in operation/in setup/takt over)	Open collector output (NPN) Applied voltage: DC24V max, Additional voltage: DC100mA (per 1 terminal) Residual voltage: 0.5V or less	Actual 1, Actual 2 (or external start/stop) Bad (or target input), subtraction, stop, end, all clear	No voltage input Impedance during short circuit: 1kΩ or less Residual voltage during short circuit: 1.5V or less Outflow current when shorted to 0Ω: Approx. 7mA	More than 1 month after full charge	Maximum of 16 divisions of working time (per pattern) x 3 patterns	Max 3	Data collection/display

Click on the part number for more information about each product

Other products of Icon Co., Ltd.

Reviews shown here are reviews of companies.

Process data collection software Leader

Icon Co., Ltd.

180+ people viewing

Process Control Systems

Process data collection software ILU Manager

Icon Co., Ltd.

170+ people viewing

Process Control Systems

Standard long-selling data collection display for production management IRD/IDD series IRD-050 series (single-sided)

Icon Co., Ltd.

450+ people viewing

10 models listed

Standard long-selling data collection display for production management IRD/IDD series IRD-025 series (single-sided)

Icon Co., Ltd.

200+ people viewing

Last viewed: 3 minutes ago

2 models listed

Standard long-selling data collection display for production management IRD/IDD series IDD-100 series (double-sided)

Icon Co., Ltd.

260+ people viewing

6 models listed

Standard long-selling data collection display for production management IRD/IDD series IDD-050 series (double-sided)

Icon Co., Ltd.

230+ people viewing

Last viewed: 2 minutes ago

6 models listed

Advanced production management low cost introductory device Data collection display device ILU series ILU-100 series (single-sided)

Icon Co., Ltd.

180+ people viewing

2 models listed

Advanced production management low cost introductory device Data collection display device ILU series ILU-050 series (single-sided)

Icon Co., Ltd.

200+ people viewing

Last viewed: 2 hours ago

2 models listed

Advanced production management low cost introductory device Data collection display device ILU series ILU-020 series (single-sided)

Icon Co., Ltd.

200+ people viewing

2 models listed

Single-level general-purpose display Data collection display ISE series ISE-100 series (single-sided)

Icon Co., Ltd.

230+ people viewing

Last viewed: 8 minutes ago

3 models listed

Single-level general-purpose display Data collection display ISE series ISE-050 series (single-sided)

Icon Co., Ltd.

190+ people viewing

Last viewed: 23 hours ago

3 models listed

View more products of Icon Co., Ltd.

About Company Handling This Product

Icon Co., Ltd.

Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided) Icon Co., Ltd.

About This Product

■Complete display functions

■Number data

■Time data

■Calculated data

■System settings

■Schedule settings

■Product number setting

■Plan settings

■Simple settings

■Useful functions

6 Models of Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)

IRD-100-24

IRD-100-26

IRD-100-34

IRD-100-36

IRD-100-44

IRD-100-46

Other products of Icon Co., Ltd.

About Company Handling This Product

Standard long-selling data collection display for production management IRD/IDD series IRD-100 series (single-sided)
Icon Co., Ltd.