All Categories

History

Wire displacement sensor (converter) DTPA-A-DTPA-A-500 for 500mm
Wire displacement sensor (converter) DTPA-A-DTPA-A-1K for 1,000mm
Wire displacement sensor (converter) DTPA-A-DTPA-A-2K for 2,000mm
Wire displacement sensor (converter) DTPA-A-DTPA-A-5K for 5,000mm
Wire displacement sensor (converter) DTPA-A-KYOWA ELECTRONIC INSTRUMENTS CO., LTD

Wire displacement sensor (converter) DTPA-A
KYOWA ELECTRONIC INSTRUMENTS CO., LTD

KYOWA ELECTRONIC INSTRUMENTS CO., LTD's Response Status

Response Rate

100.0%

Response Time

30.3hours

Relatively Fast Response


About This Product

This is a converter that measures the amount of displacement by converting the expansion and contraction of the displacement detection wire into an electrical quantity via a potentiometer.

■Features

・Uses wire that is resistant to kink (bending or twisting) ・High response (equivalent to 1,000mm/s at rated capacity stroke) - Hard to break down due to new wire winding mechanism ・Small and lightweight, easy to install ・Measurement force is constant ・Can be measured with a strain meter

■Notes

・CE-compliant products can also be manufactured. - TEDS compatible products can also be manufactured.

  • Product

    Wire displacement sensor (converter) DTPA-A

Share this product


320+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Wire displacement sensor (converter) DTPA-A

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Nonlinearity Temperature effect at zero point Mass Allowable overload Allowable temperature range Allowable applied voltage Repeatability Repeat life Measuring power Temperature compensation range Maximum response speed Recommended applied voltage Rated capacity Rated output Output resistance Temperature effect on output Input resistance Protection class Hysteresis Cable
Wire displacement sensor (converter) DTPA-A-Part Number-DTPA-A-500 for 500mm

DTPA-A-500 for 500mm

Available upon quote

Within ±0.3%RO

Within ±0.05%RO/℃

Approximately 220 g (excluding cable)

103% (10mm wire pulled out and fixed)

-10~80℃ (no condensation)

10V AC or DC

0.1%RO or less

More than 20,000 times

2 N (max. 2.8N)

0~70℃ (no condensation)

1,000mm/s (displacement deviation within ±1%RO)
(Spike noise may occur at speeds below 10mm/s)

1~5V AC or DC

500mm

2.5mV/VV (5,000×10^-6 strain) ±10%

260Ω±3%

Within ±0.05%/℃

350Ω±1%

IP40 (JIS C 0920)

Within ±0.3%RO

0.08 mm2, 4-conductor shielded vinyl 3 m, outer diameter 4 mm, tip connector plug PRC03-12A10-7M
(The shield is not connected to the main body)

Wire displacement sensor (converter) DTPA-A-Part Number-DTPA-A-1K for 1,000mm

DTPA-A-1K for 1,000mm

Available upon quote

Within ±0.3%RO

Within ±0.05%RO/℃

Approximately 220 g (excluding cable)

103% (10mm wire pulled out and fixed)

-10~80℃ (no condensation)

10V AC or DC

0.1%RO or less

More than 20,000 times

2 N (max. 2.8N)

0~70℃ (no condensation)

1,000mm/s (displacement deviation within ±1%RO)
(Spike noise may occur at speeds below 10mm/s)

1~5V AC or DC

1,000mm

2.5mV/VV (5,000×10^-6 strain) ±10%

260Ω±3%

Within ±0.05%/℃

350Ω±1%

IP40 (JIS C 0920)

Within ±0.3%RO

0.08 mm2, 4-conductor shielded vinyl 3 m, outer diameter 4 mm, tip connector plug PRC03-12A10-7M
(The shield is not connected to the main body)

Wire displacement sensor (converter) DTPA-A-Part Number-DTPA-A-2K for 2,000mm

DTPA-A-2K for 2,000mm

Available upon quote

Within ±0.3%RO

Within ±0.05%RO/℃

Approximately 370 g (excluding cable)

103% (10mm wire pulled out and fixed)

-10~80℃ (no condensation)

10V AC or DC

0.2%RO or less

More than 20,000 times

2 N (max. 2.8N)

0~70℃ (no condensation)

1,000mm/s (displacement deviation within ±1%RO)
(Spike noise may occur at speeds below 20mm/s)

1~5V AC or DC

2,000mm

2.5mV/VV (5,000×10^-6 strain) ±10%

260Ω±3%

Within ±0.05%/℃

350Ω±1%

IP40 (JIS C 0920)

Within ±0.3%RO

0.08 mm2, 4-conductor shielded vinyl 3 m, outer diameter 4 mm, tip connector plug PRC03-12A10-7M
(The shield is not connected to the main body)

Wire displacement sensor (converter) DTPA-A-Part Number-DTPA-A-5K for 5,000mm

DTPA-A-5K for 5,000mm

Available upon quote

Within ±0.3%RO

Within ±0.05%RO/℃

Approximately 1.2 kg (excluding cable)

103% (10mm wire pulled out and fixed)

-10~80℃ (no condensation)

10V AC or DC

0.2%RO or less

More than 20,000 times

2 N (max. 2.8N)

0~70℃ (no condensation)

1,000mm/s (displacement deviation within ±1%RO)
(Spike noise may occur at speeds below 20mm/s)

1~5V AC or DC

5,000mm

2.5mV/VV (5,000×10^-6 strain) ±10%

260Ω±3%

Within ±0.05%/℃

350Ω±1%

IP40 (JIS C 0920)

Within ±0.3%RO

0.08 mm2, 4-conductor shielded vinyl 3 m, outer diameter 4 mm, tip connector plug PRC03-12A10-7M
(The shield is not connected to the main body)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Displacement Sensors Products

Other products of KYOWA ELECTRONIC INSTRUMENTS CO., LTD

Reviews shown here are reviews of companies.


View more products of KYOWA ELECTRONIC INSTRUMENTS CO., LTD

About Company Handling This Product

Response Rate

100.0%


Response Time

30.3hrs

Company Overview

KYOWA ELECTRONIC INSTRUMENTS CO., LTD., founded in 1949 as Kyowa Radio Laboratory Co., Ltd., is a Japanese man...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree