Measuring bobbin winder with simple traverse TMS60-TC150-B
Yutaka Manufacturing Co., Ltd.
📜
Paper & Pulp Industry Use
⚙️
Plastic & Rubber Manufacturing
🧵
Textile Industry Use
About This Product
This is a device that measures the length of wires, cables, electric wires, etc. and winds them into a parasol. The winding length will automatically decelerate and stop at the set value. The deceleration start position can be set. The winding length can be set from 1 to 999,999mm (approximately 1,000m).
Traverse speed can be changed with the volume control. Traverse movement speed can be changed from 1 to 25 mm. The traverse movement width can change the position of the proximity sensor.
The speed of the winding rotation can be changed using the volume control. The winding speed can be changed from 1 to 90 revolutions/minute. After winding has stopped, the traverse always stops on the near side. The number of windings can be set from 1 to 9,999. The winding direction can be changed between top winding and bottom winding using the touch panel.
■Options
Foot switch (run/stop)
We can also manufacture custom-made products to your specifications, starting from just one unit, so please contact us. Bobbin winding specifications are also available. Line-up winding is not possible. Bobbin is not included in the product.
-
Product
Measuring bobbin winder with simple traverse TMS60-TC150-B
-
Handling Company
Yutaka Manufacturing Co., Ltd.
-
Categories
-
Usage Scenarios
Paper & Pulp Industry Use / Plastic & Rubber Manufacturing / Textile Industry Use
1 Models of Measuring bobbin winder with simple traverse TMS60-TC150-B
| Product Image | Part Number | Price (excluding tax) | Applicable | Body weight | External signal | Installation bobbin dimensions | Length measurement | Option | Overall dimensions | Power supply voltage | Traverse movement speed | Traverse movement width | Winding speed | Winding tension | Winding torque |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TMS60-TC150-B |
$ 9,087.00〜 | Maxφ30mm | Approximately 70Kg | Equipped as standard with temporary stop and restart using external signals (connected to side connector) | Maximum bobbin outer diameter 450mm Bobbin width 90~150mm Bobbin shaft hole φ18~38mm | 1~999,999mm (approximately 1,000m) Automatic deceleration and stop at set value | Foot switch (connected to side connector) | Width 735mm Depth 690mm Height 700mm | A100V 10A | 1~25mm/sec Can be changed by adjusting the volume | Adjust by changing the reciprocating switch position | 1~90RPM type, changeable with volume |
64N (When winding diameter φ250) ・53N (When winding diameter φ300) ・ 45N (When winding diameter φ350) ・40N (When winding diameter φ400) ・ 35N (at winding diameter φ450) ・ |
1~8N・m |
Customers who viewed this product also viewed
Other products of Yutaka Manufacturing Co., Ltd.
View more products of Yutaka Manufacturing Co., Ltd.