Film winder (paper tube width 200mm)
Yutaka Manufacturing Co., Ltd.
📜
Paper & Pulp Industry Use
⚙️
Plastic & Rubber Manufacturing
🧵
Textile Industry Use
About This Product
■Ideal for winding up slitter ears. Ideal for separator winding
This unit winds paper, film, nonwoven fabric, aluminum foil, copper foil, etc. with constant tension. Since a torque motor is used for winding, the winding torque can be adjusted with a volume control. Winding torque and rotation speed are almost proportional, so if you increase the volume, both speed and torque will increase. There is a switch to change the winding rotation direction: forward/off/reverse.
■Options
・Foot switch (run/stop)
・Standard tapered cone for 3 inch paper tube
We can also manufacture custom-made products to your specifications, starting from just one unit, so please contact us. Since it is a torque motor, it can also be used as a winding brake.
■Simple film rewinding
You can use it to rewind films, etc. by setting one unit to the unwinding side and the other to the winding side. To use it, rotate the unwinding side in the opposite direction and adjust the volume so that the torque on the winding side is stronger than on the unwinding side. It is used for winding slitter ears, etc.
-
Product
Film winder (paper tube width 200mm)
-
Handling Company
Yutaka Manufacturing Co., Ltd.
-
Categories
-
Usage Scenarios
Paper & Pulp Industry Use / Plastic & Rubber Manufacturing / Textile Industry Use
1 Models of Film winder (paper tube width 200mm)
| Product Image | Part Number | Price (excluding tax) | Applicable paper tube | Approximate dimensions | Body weight | Maximum winding diameter | Maximum winding weight | Paper tube fixed | Power supply voltage | Torque motor capacity | Winding tension 100rpm type | Winding tension 300rpm type | Winding tension 50rpm type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MS-3N-S-200-50 (100, 300) rpm-R (L) |
$ 1,170.00〜 | 3 inches (custom order available) Width 60~200mmMAX | Length 650~ x Width 250 x Height 380mm | Approximately 17Kg | Φ400mm | 10kg | Aluminum taper cone R (right-hand thread) or L (left-hand thread) used in tightening direction | AC100V 2A | 20W |
5.8N/at winding diameter φ200mm (at continuous rating) max29N/at winding diameter φ200mm (at short-time rating) |
1.9N/at winding diameter φ200mm (at continuous rating) max9.5N/at winding diameter φ200mm (at short-time rating) |
12N/at winding diameter φ200mm (at continuous rating) max60N/at winding diameter φ200mm (at short-time rating) |
Customers who viewed this product also viewed
Other products of Yutaka Manufacturing Co., Ltd.
View more products of Yutaka Manufacturing Co., Ltd.