All Categories
History
Response Rate
100.0%
Response Time
275.2hours
Product
2-color thermometer with 2-color corrected thermal image ISR6-TiHandling Company
Yamazato Sangyo Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Communication function | Transmittance correction τ | Measurement software | Insulation measures | Accuracy (uncertainty) | Window transmittance monitoring | Focal length | Measurement image | Temperature range | Power consumption | Ratio correction K (=ε1/ε2) | Detection wavelength | Detector | Main unit LED display | Emissivity correction ε | Response time t90 | Ambient temperature | Installation direction | Resolution | Output signal | Output mode | Reproducibility | Protection class | Power supply | Location confirmation | Lens focus | Housing | Scaling | Switch off limit | FOV (measurement distance: measurement diameter) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ISR6-Ti |
Available upon quote |
RS485 (addressable), half duplex, baud rate 1,200 ~ 115. 2k |
0.050~1.000 0.001 unit (single color mode) |
InfraWin attached (works on Windows PC) |
Power circuit, interface, and analog output signals are isolated from each other |
±0.3% of measured value + 2℃＜1,500℃ |
Setting: 0 (off) ~99% |
210mm ~ 5,000mm |
Thermal image with pyrometer measurement point |
MB 18: 700 ~1,800℃ |
Max. 8.5W (including laser pilot light) |
0.800~1.200 0.001 unit (2 color mode) |
0.9μm /1.05μm |
Si photodiode |
4-digit LED (character height 5mm); single color/two colors, measurement temperature, focal length |
0.050~1.000 0.001 unit (single color mode) |
2 ms (however, the response time is automatically extended near the lower limit of the signal level) |
0~65℃ |
Omnidirectional |
0.1℃ Analog output has 16bit resolution |
DC4 ~ 20mA/DC0 ~ 20mA linear output (selectable), load resistance 500Ω or less |
Single color mode/two color mode switching |
±0.15% of measured value + 1℃ |
IP65 (IEC 60529) |
DC24V ±25% Power supply ripple must be less than 50mV |
Circle in the center of the thermal image |
Movable focus method (Please refer to the section on measurement distance and area.) |
Stainless steel |
Any setting possible within the temperature range, minimum scaling range 50℃ |
2%~50% |
Approximately 190:1 |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
275.2hrs
