All Categories

History

High voltage D.C. contactor HV500 series-HV500
High voltage D.C. contactor HV500 series-Albright Japan Co., Ltd.

High voltage D.C. contactor HV500 series
Albright Japan Co., Ltd.

Albright Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

25.7hours

Relatively Fast Response


About This Product

Designed for applications requiring higher voltages such as automotive, charging systems, renewable energy, and battery packs. The demand for higher DC voltages is increasingly necessary in today's world. In a field where innovation and cost efficiency are required, Albright has expanded its comprehensive range to include voltages up to 1000 volts and complete hermetic sealing. Albright's high voltage series is directly compatible with existing contactors on the market. For over 70 years, Albright has been designing contactors for the most demanding applications.

■Features of HV500

・Completely sealed type (complete hermetic seal) ・Non-polar sensitivity ・PWM coil economizer option ・Coil reverse polarity protection function* ・Coil suppression* ・Auxiliary switch - normally open (A contact) or normally closed (B contact) option ・Auxiliary switch - Mirror (normally closed (b contact)) option ・Magnetic latch option ・Silver contact option * When the PWM board is installed at the factory

■Auxiliary switch

The optional microswitch can be normally open (A contact, white connection wire), normally closed (B contact, blue connection wire), or mirror (orange connection wire). A mirror auxiliary contact option allows a fail-safe signal to indicate the state of the main contacts during normal operation and during fault conditions. The mirror contact function requires proper design of the auxiliary contacts that link with the mains contacts and complies with EN 60947-4-1, Annex F. Furthermore, it is compliant with EN 60947-5-1, Annex L and can be used to suit your design as a reliable method of monitoring the condition of contactors.

■Silver alloy contacts

If frequent load switching is required, silver alloy contacts can be specified. Albright has a history of specializing in high current switching, and the HV500 is designed to switch high current loads.

■Hermetic seal

Albright's HV series is fully sealed, allowing for durability in harsh environments and operation in potentially hazardous conditions. If a PWM circuit is included, this circuit is also sealed.

  • Product

    High voltage D.C. contactor HV500 series

Share this product


190+ people viewing

Last viewed: 2 hours ago


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

1 Models of High voltage D.C. contactor HV500 series

Image Part Number Price (excluding tax) Voltage drop Weight bracket Weight switch Continuous operating current (maximum) Continuous operating current Auxiliary Withstand voltage test (sea level) Weatherability category (IEC 60068-1) Insulation resistance Environmental protection seal Humidity Temperature – Operating Mechanical durability Auxiliary contacts Mechanical durability Main contacts Minimum current Maximum altitude Connection wire length Auxiliary switch Connection wire length Coil Contact arrangement Auxiliary contacts Contact arrangement Main contacts Vibration, sine wave Rated contact voltage Main contact Switching capacity (resistive load) Coil voltage range Coil When closed When open Maximum breaking current at 500V D.C
High voltage D.C. contactor HV500 series-Part Number-HV500

HV500

Available upon quote

Less than 30mV at 100A

20g

400g

500A (190mm2 or 350MCM busbar)

250A (50mm2 or 1-1/0 AWG cable)

Strip wire (cable is 0.325mm2 or 22AWG)

4,000V D.C./Leak <1mA

10/085/21

>200MΩ

Contacts, auxiliary and PWM circuits are hermetically sealed - IP67 and IP69K or higher

5 - 85%

-45℃~+120℃

>10^5 cycles

>10^6 cycles

12V at 100mA

3,000m

280mm

250mm

Single pole single throw - A contact Single pole single throw - B contact Single pole single throw - B contact Mirror

Single pole single throw - A contact

80 - 2,000Hz peak 20G

12V - 500V D.C.

Male (M8, M10) or female (M6, M8)

24V D.C. at 1A.

12V D.C. - 96V D.C.

Strip wire (cable is 0.325mm2 or 22AWG)

20G peak

20G peak

2,000A (1 cycle)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Electromagnetic Contactors Products

Other products of Albright Japan Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Albright Japan Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

25.7hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree