Receiving unit/receiver series Receiving unit RX-10/RX-10A

2 Models of Receiving unit/receiver series Receiving unit RX-10/RX-10A

Click on the part number for more information about each product

Image	Part Number	Price (excluding tax)	Power supply voltage	Wiring connection	Number of transmitters that can be registered	Mass	Alarm total output	Alarm output timer	Installation location	Indicator light	Aerial	Current consumption/power consumption	Contact capacity	Exterior	Receivable distance	Frequency band used	Usable ambient temperature	Data retention function
	RX-10	Available upon quote	DC10V ~ 28V	Comes with cabtyre cable (5m)	30 units	Approx. 950g (including cable) Approx. 1,000g (including cable)	Alarm: No-voltage relay contact A contact/B contact switching type	3 seconds / 10 seconds / 30 seconds / 60 seconds / 2 minutes / 3 minutes / 5 minutes / continuous (off-delay operation) Retrigger operation due to re-reception during timer If continuous, the output will be maintained until the power is turned off.	Outdoor/indoor	When energized: lights up green Dead battery: flashing green When receiving: Lit in red (synchronized with alarm output) When reception sensitivity is poor: Flashes red (4 seconds after reception) In registration mode: Red and green alternately lit	Λ/4 whip antenna	100mA	AC100V 500W or less (incandescent lamp load) DC30V 5A or less (inductive load)	Resin (white)	Approximately 100m (line-of-sight distance)	426MHz band 4 waves (wireless equipment for low power security system)	-10℃~＋50℃	Yes
	RX-10A	Available upon quote	AC100V (50/60Hz)	Comes with cabtyre cable (5m)	30 units	Approx. 950g (including cable) Approx. 1,000g (including cable)	Alarm: No-voltage relay contact A contact/B contact switching type	3 seconds / 10 seconds / 30 seconds / 60 seconds / 2 minutes / 3 minutes / 5 minutes / continuous (off-delay operation) Retrigger operation due to re-reception during timer If continuous, the output will be maintained until the power is turned off.	Outdoor/indoor	When energized: lights up green Dead battery: flashing green When receiving: Lit in red (synchronized with alarm output) When reception sensitivity is poor: Flashes red (4 seconds after reception) In registration mode: Red and green alternately lit	Λ/4 whip antenna	2W	AC100V 500W or less (incandescent lamp load) DC30V 5A or less (inductive load)	Resin (white)	Approximately 100m (line-of-sight distance)	426MHz band 4 waves (wireless equipment for low power security system)	-10℃~＋50℃	Yes