All Categories

History

Receiving unit/receiver series Receiver (4 frequency switching compatible type) RXF-300A-RXF-300A
Receiving unit/receiver series Receiver (4 frequency switching compatible type) RXF-300A-Excite Co., Ltd.

Receiving unit/receiver series Receiver (4 frequency switching compatible type) RXF-300A
Excite Co., Ltd.


About This Product

■Features

・The 4-frequency switching function reduces radio wave interference when many transmitters and repeaters are installed. ・Full security mode and partial security/chime mode are available. (Select either partial security mode or chime mode using an internal switch) ・In full security mode, CHs 1 to 4 are in alert state, and in partial security mode, CHs 1 to 2 are in alert state, and an alarm sounds when a signal is received. ・In chime mode, a different notification sound will sound for each channel when a signal is received. ・When in full security mode, there is a warning/warning delay timer. -The volume of both alarm and notification sounds can be adjusted from silent to approximately 75dB. - Indicator light notifies you of low transmitter battery and environmental abnormality. -Equipped with three external contact outputs (general, output ①, output ②), tamper error output, periodic transmission error output, and dead battery error output. - When combined with a contact input type transmitter, there is a mode that maintains the notification sound and external contact output from the time the alarm signal is received until the recovery signal is received. - The maximum number of transmitters that can be registered is 40. ・The power supply is 2WAY: AC100V and DC10 to 30V.

■Alarm output General alarm output

・Contact: Voltageless relay contact (A contact/B contact switching type) AC/DC30V/0.5A resistive load ・Operation: One shot (approximately 4 seconds) and holding operation when receiving an alarm ・Full security, partial security (1CH, 2CH only), operation at chime

■Alarm chime in progress

・When receiving 1CH alarm: “ping-dong” ・When receiving 2CH alarm: “Pipipipipi” ・When receiving 3CH alarm: “Jippuru” ・When receiving a 4CH alarm: For Elise (melody) ・Ringing time: One shot (approximately 6 seconds) and holding operation ・Volume: 0 to approximately 75dB / 1m in front, variable with volume

  • Product

    Receiving unit/receiver series Receiver (4 frequency switching compatible type) RXF-300A

Share this product


130+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Receiving unit/receiver series Receiver (4 frequency switching compatible type) RXF-300A

Image Part Number Price (excluding tax) Power supply voltage Power output Wiring connection Number of registered transmitters Mass Alarm sound Partial security in progress Alarm sound: Full security Alarm output Output ② Alarm output Output ① Installation location Indicator light Aerial Abnormal output Battery dead output Abnormal output Regular transmission abnormal output Abnormal output Tamper abnormal output Power consumption/current External operation switch Exterior Receivable distance Internal operation switch Frequency band used Usable ambient temperature
Receiving unit/receiver series Receiver (4 frequency switching compatible type) RXF-300A-Part Number-RXF-300A

RXF-300A

Available upon quote

AC100V (50/60Hz) or DC10 ~ 30V (with polarity)

DC12V・150mA

Terminal type (AC power input uses both plug type and terminal type)

40 units

Approximately 500g

When receiving 1CH, 2CH alarm: “Uuuuuuu” *No operation when receiving 3CH, 4CH alarm
Ringing time: One shot (approximately 6 seconds) and holding operation
Volume: 0 ~ approx. 75 dB / 1m in front, variable with volume

When receiving 1CH~4CH alarm: “Uuuuuuuu”
Ringing time: One shot (alarm output timer setting time) and holding operation
Sound volume: 0 to approx. 75dB / 1m in front, variable with volume

Contact: Voltageless relay contact (A contact) AC/DC30V/0.5A resistive load
Operation: One shot when receiving an alarm (alarm output timer setting time)
Only during full security

Contact: Voltageless relay contact (A contact) AC100V/500W (incandescent lamp load)
Operation: One shot when receiving an alarm (alarm output timer setting time)
Operates during full security and partial security (1CH, 2CH only)

Indoor (wall mount)

・Power/receiving indicator light ・Error indicator light ・CH indicator light ・Full security button ・Partial security/chime button

Λ/4 whip antenna

Contact: Voltageless semiconductor contact (A contact/B contact batch switching type) AC/DC24V/0.25A Resistive load
Operation: Hold operation after reception

Contact: Voltageless semiconductor contact (A contact/B contact batch switching type) AC/DC24V/0.25A Resistive load
Operation: Hold operation after detection

Contact: Voltageless semiconductor contact (A contact/B contact batch switching type) AC/DC24V/0.25A Resistive load
Operation: Hold operation after reception

6W/250mA

・Memory clear button ・Full security button ・Partial security/chime button

Resin (white)

Approximately 100m (line-of-sight distance)

・Registered CH switching button ・Erase button ・Volume volume ・Reception frequency setting switch ・Function setting switch (8P)

426MHz band 4 waves (wireless equipment for low power security system)

-10℃~+50℃

Other products of Excite Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Excite Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree