Water leak sensor series Wireless type Wireless spot type water leak sensor transmitter with buzzer EXL-SWB2
Excite Co., Ltd.
About This Product
■Features
- Equipped with a buzzer, so even if multiple sensors are registered on the same channel of the receiver or receiving unit, you can tell which sensor is detecting the sensor by the buzzer sound when you go near the site.
・Water leakage is detected by the electrodes (4 main body, 2 point sensors) on the bottom of the case and transmitted to the receiver via radio waves.
- Since it is battery operated and does not require wiring, it can be used simply by placing it on the target area such as the floor.
- Water leaks can be detected at two locations: the sensor itself and the attached point sensor, so water leaks can be monitored both at the main body and at a separate location. (Cable length between main unit and point sensor: 3.4m)
- The point sensor section can be installed in a concealed area (in the ceiling, under the floor, etc.), and the main unit can be installed in a location where maintenance (battery replacement, etc.) is easy (near the inspection port or on the floor).
-The case has a waterproof structure, so it will not malfunction even if submerged in water.
- Comes with height adjustment screws for stable installation depending on the installation location.
■Battery life
・Alkaline battery: Approximately 2 years (at room temperature) However, the time will be shortened if the buzzer sounds
・Lithium battery: Approximately 4 years (at room temperature) However, the time will be shortened if the buzzer sounds
・Battery life is a guideline when operating at room temperature and is not a guaranteed value.
-
Product
Water leak sensor series Wireless type Wireless spot type water leak sensor transmitter with buzzer EXL-SWB2
-
Handling Company
Excite Co., Ltd.
-
Categories
1 Models of Water leak sensor series Wireless type Wireless spot type water leak sensor transmitter with buzzer EXL-SWB2
| Product Image | Part Number | Price (excluding tax) | Additional functions | Aerial | Detection method | Equipment installation ambient temperature | Exterior | Installation location | Mass | Notification sound | Operation indicator light (red) | Output | Power supply | Radio frequency band | Radio wave range | Structure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
EXL-SWB2 |
Available upon quote | Periodic transmission function, low battery notification function, notification sound on/off setting function | Built-in | Electrode type spot detection (built-in main body + point sensor) | -10℃~＋50℃ (No freezing) (Battery performance may deteriorate below 0℃ or above 40℃) | ABS resin (gray) | Indoor/outdoor (floor mounted) | Approx. 390g (including battery) |
Detection sound: Repeated "hyun hyun" sound (intermittent sound with a cycle of about 5 seconds) Volume: 75dB or more (at 1m in front of the sensor) *The notification sound can be switched between “Yes” and “No” using the internal setting switch. |
Upon detection/recovery: One shot lighting When the battery is dead: Flashing |
10 mW or less | Alkaline battery: 6LR61 or lithium battery: U9VL x 1 (DC9V) | 426MHz band (wireless equipment for low power security systems) | Approximately 100m (line-of-sight distance) | Daily life waterproof structure IP67 equivalent |
Customers who viewed this product also viewed
Other products of Excite Co., Ltd.
View more products of Excite Co., Ltd.
About Company Handling This Product
- Japan