Japan Material Co., Ltd.'s Response Status
This product is registered by Japan Material Co., Ltd..
About This Product
A geometric correction video processor that supports 4K/60p input. Installed between the projector and the source device, it provides keystone correction, curvature correction, curved projection correction, etc. of input images, increasing the flexibility of projector installation.
Main features
■Geometric distortion correction
By displaying and controlling up to 153 points (17 x 9) that serve as starting points for geometric correction in the projection area, it is possible to project onto a screen that is not flat. It also supports linearity correction, which adjusts linearly.
■Stacking correction
Stacking is possible by correcting the projection position of multiple projectors and projecting on top of each other.
■Corner correction
A single projector can project onto objects such as walls with corners. When corner correction is enabled, geometric correction (point & linearity correction value) is disabled.
■Dividing and overlapping input images (1 input, N output)
GeoBox's multi-display function allows you to split a single input image, and the overlap function generates overlapping images that can be projected onto multiple screens. Since the same video source must be input to each GeoBox, a separate video distributor is required. Only one HDMI input signal can be projected onto a multi-screen by simply connecting the HDMI loop out terminal and another channel HDMI input terminal with an HDMI cable.
■PinP, POP (simultaneously projecting two sources)
Supports picture-in-picture, which displays two input signals on one screen. It is also compatible with POP (Picture Outside Picture), which displays two input signals left and right, top and bottom. Only the input combination of HDMI-1 input and HDMI-2 input can be set, and the image rotation (rotate) setting cannot be used together.
■Rotation display
Original footage can be rotated
■Reverse display
The original video can be displayed inverted (left/right, top/bottom, left/right+top/bottom) for each output destination.
■EDID customization
EDID can be customized in the range of 1,024 to 3,840 horizontally and 720 to 2,400 vertically. The setting EDID may not be reflected due to GPU specifications or functional limitations of the source device.
■Dedicated software GCT
From a computer with the dedicated application software GCT (GeoBox Control Tool) installed, you can configure various settings for this unit, save and recall settings, monitor the reboot/IN/OUT real-time status, and update firmware via USB or network.
-
-
Product
Geometric Distortion Correction/Edge Blending GeoBox M811L Geometric Correction Processor
Share this product
