All Categories

History

Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA-T-10A
Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA-Konica Minolta Japan Co., Ltd.

Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA
Konica Minolta Japan Co., Ltd.

🏗️ Architecture & Construction Use 🚗 Automotive & Transport Use 💻 Electronics & Electrical Use

Konica Minolta Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

6.5hours

Fast Response


About This Product

■Summary

・T-10A/T-10MA is a high-precision illumination meter that complies with JIS AA class and DIN Class B. ・Next-generation lighting that supports PWM light can also be accurately measured, making it easy to build an equiluminance measurement system that can be incorporated into multi-point measurement and testing equipment.

■Main uses

・Research and inspection of lighting equipment manufacturers ・Government testing agency ・Maintenance management of factories, offices, hospitals, etc. ・Illuminance management of security lights and street lights ・Architecture-related light source check ・Illuminance management at LED plant factories ・As a sensor for total luminous flux/light distribution characteristic device, etc.

■Compatible with PWM light. Measurement of next-generation light sources is also possible.

PWM is an abbreviation for Pulse Width Modulation, which is a method of controlling signal strength by adjusting the ratio of ON and OFF periods of a pulse signal. A pulse signal is a signal that repeats an ON state and an OFF state, and the ratio of the ON period to one cycle is called the duty ratio. PWM dimming is a method of adjusting brightness by adjusting the duty ratio (lighting time) of pulsed light. The longer the lighting time, the brighter the light; the shorter the lighting time, the darker the light.

■Compliant with JIS AA class and DIN Class B

T-10A and T-10MA comply with JIS C 1609-1:2006 General Total AA Class Illuminance Meter and DIN 5032 Part 7 1985 Edition Class-B. A reliable illumination meter that pursues high accuracy and reliability. *This device has received type approval under the Measurement Act for the main body and light receiving section. Type approval has not been obtained for cases where the main body and light receiving section are used separately (cable extension/multi-point measurement). The model approval number is applied to combinations with the same matching number written on the nameplate of both the main unit and the receiver.

■Multi-point measurement possible

You can easily measure the illuminance distribution of architectural lighting, street lights, projectors, etc. with one device.

■Remote measurement possible

Since the light receiving section can be removed from the main body and connected using a commercially available LAN cable, it can be easily integrated into the customer's inspection system.

  • Product

    Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA
  • Usage Scenarios

    Architecture & Construction Use / Automotive & Transport Use / Electronics & Electrical Use

Share this product


560+ people viewing

Last viewed: 4 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply Battery life Mass (without battery) Correction function Display Linearity Class of illumination meter Humidity characteristics Measurement function Measuring range Temperature characteristics Standard accessories Oblique incident light characteristics Size/mass Photodetector Spectral responsivity Storage temperature and humidity range Operating temperature and humidity range Digital signal input/output Type Cord length Analog signal output
Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA-Part Number-T-10A

T-10A

Available upon quote

2 AA batteries/dedicated AC adapter (sold separately)

72 hours or more (in continuous measurement when using alkaline batteries)

200g

Setting by correction coefficient (C.C.F): Measured value x 0.500~2.000

LCD number of valid digits: 3 digits (some 4 digits) With backlight illumination (automatic illumination)

±2% of indicated value ±1digit

Conforms to JIS C 1609-1:2006 general type AA class illuminance meter Conforms to DIN 5032 Part7 1985 edition Class-B

±3% of indicated value (according to our test conditions)

NORM: Illuminance (lx) ⊿: Illuminance difference (lx) ・Illuminance ratio (%) Σ: Integrated illuminance (lx・h) ・Integrated time (h) Time average illuminance (lx)

Auto range (manual 5 range when analog output)

±3% of indicated value (according to our test conditions)

Battery case, cap, strap

3% or less

69 (width) x 174 (height) x 35 (depth)

Silicon photocell

Deviation from standard spectral luminous efficiency (f1’) 6% or less

-20~55℃ Relative humidity 85% or less (at 35℃) /No condensation

-10~40℃ Relative humidity 85% or less (at 35℃) /No condensation

USB

Standard light receiving area

-

1mV/1digit, maximum saturation voltage 3V, output impedance 10kΩ, 90% response time 28mS

Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA-Part Number-T-10MA

T-10MA

Available upon quote

2 AA batteries/dedicated AC adapter (sold separately)

72 hours or more (in continuous measurement when using alkaline batteries)

205g

Setting by correction coefficient (C.C.F): Measured value x 0.500~2.000

LCD number of valid digits: 3 digits (some 4 digits) With backlight illumination (automatic illumination)

±2% of indicated value ±1digit

Conforms to JIS C 1609-1:2006 general type AA class illuminance meter Conforms to DIN 5032 Part7 1985 edition Class-B

±3% of indicated value (according to our test conditions)

NORM: Illuminance (lx) ⊿: Illuminance difference (lx) ・Illuminance ratio (%) Σ: Integrated illuminance (lx・h) ・Integrated time (h) Time average illuminance (lx)

Auto range (manual 5 range when analog output)

±3% of indicated value (according to our test conditions)

Battery case, cap, strap

3% or less

69 (width) x 174 (height) x 35 (depth)

Silicon photocell

Deviation from standard spectral luminous efficiency (f1’) 6% or less

-20~55℃ Relative humidity 85% or less (at 35℃) /No condensation

-10~40℃ Relative humidity 85% or less (at 35℃) /No condensation

USB

Mini light receiver

1m

1mV/1digit, maximum saturation voltage 3V, output impedance 10kΩ, 90% response time 28mS

Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA-Part Number-T-10WSA

T-10WSA

Available upon quote

2 AA batteries/dedicated AC adapter (sold separately)

72 hours or more (in continuous measurement when using alkaline batteries)

260g (light receiving part only 120g)

Setting by correction coefficient (C.C.F): Measured value x 0.500~2.000

LCD number of valid digits: 3 digits (some 4 digits) With backlight illumination (automatic illumination)

±2% of indicated value ±1digit

Compliant with JISC 1609-1:2006 special type illuminance measuring device

±3% of indicated value (according to our test conditions)

NORM: Illuminance (lx) ⊿: Illuminance difference (lx) ・Illuminance ratio (%) Σ: Integrated illuminance (lx・h) ・Integrated time (h) Time average illuminance (lx)

Auto range (manual 5 range when analog output)

±3% of indicated value (according to our test conditions)

Battery, case, mini cap, strap

10% or less

69 (width) x 174 (height) x 35 (depth)

Silicon photocell

Deviation from standard spectral luminous efficiency (f1’) 6% or less

0~55℃ Relative humidity 85% or less (at 35℃) /No condensation

5~40℃ Relative humidity 85% or less (at 35℃) /No condensation

USB

Waterproof mini receiver

5m

1mV/1digit, maximum saturation voltage 3V, output impedance 10kΩ, 90% response time 28mS

Illuminometer T-10A/T-10MA/T-10WSA/T-10WLA-Part Number-T-10WLA

T-10WLA

Available upon quote

2 AA batteries/dedicated AC adapter (sold separately)

72 hours or more (in continuous measurement when using alkaline batteries)

340g (receiver only 200g)

Setting by correction coefficient (C.C.F): Measured value x 0.500~2.000

LCD number of valid digits: 3 digits (some 4 digits) With backlight illumination (automatic illumination)

±2% of indicated value ±1digit

Compliant with JISC 1609-1:2006 special type illuminance measuring device

±3% of indicated value (according to our test conditions)

NORM: Illuminance (lx) ⊿: Illuminance difference (lx) ・Illuminance ratio (%) Σ: Integrated illuminance (lx・h) ・Integrated time (h) Time average illuminance (lx)

Auto range (manual 5 range when analog output)

±3% of indicated value (according to our test conditions)

Battery, case, mini cap, strap

10% or less

69 (width) x 174 (height) x 35 (depth)

Silicon photocell

Deviation from standard spectral luminous efficiency (f1’) 6% or less

0~55℃ Relative humidity 85% or less (at 35℃) /No condensation

5~40℃ Relative humidity 85% or less (at 35℃) /No condensation

USB

Waterproof mini receiver

10m

1mV/1digit, maximum saturation voltage 3V, output impedance 10kΩ, 90% response time 28mS

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Illuminometers Products

Other products of Konica Minolta Japan Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Konica Minolta Japan Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

6.5hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree