All Categories

History

CT-500C/CS Compact high-power machine dedicated processor GP-532-GP-532 processor (CT-500C/CS small high-power machine only)
CT-500C/CS Compact high-power machine dedicated processor GP-532-Iwafuji Industry Co., Ltd.

CT-500C/CS Compact high-power machine dedicated processor GP-532
Iwafuji Industry Co., Ltd.

Iwafuji Industry Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

20.5hours

Relatively Fast Response


About This Product

■Compact body with a width of 1.96m and equipped with a 12t hydraulic, excavator-class high-power engine

A base machine exclusively for forestry that can be equipped with various attachments such as processors and winches.

■Further evolution of total performance

- A small thinning machine specifically for forestry with excellent stability. - Equipped with a high-power engine, it exhibits excellent material-forming performance comparable to upper class (12t excavators). -Environmentally friendly engine that complies with the 2011 exhaust gas standards for specified special vehicles. This is an electronically controlled engine using CAN control. ・Improved engine output. Rated output 69kW (+2kW compared to conventional model) -Long boom that makes loading work easy. ・Loading height has been improved. Maximum loading height 3,575m (+6.5cm compared to conventional model) - Shortened the minimum rear turning radius. Turning radius 1.38m (-10cm compared to conventional model) ・The compact body with a vehicle width of 1.96m can drive on narrow forest roads with a width of 2m. - Oscillating type (bogie type) track rollers conform to the ground, allowing smooth and stable running. ・Strengthened crawler upper roller. A larger lower roller is used. - Adopts a suspension seat with excellent cushioning properties to reduce vibrations and operator fatigue during driving.

■Features

・Equipped with a new multi-monitor ・Attachments can be selected to accommodate various work formats. - Demonstrates power in thinning work

■Excellent building material performance comparable to higher classes

・Lightweight processor weighing 650kg. - Capable of cutting balls up to a maximum diameter of 53cm. ・Can delimb wood with a diameter of 3 to 32 cm. ・360° full rotation without worrying about hydraulic hoses is excellent for maneuvering and is effective when working on narrow work paths. ・The material feeding device is a tire-type feed roller that is gentle on the material. ・Powerful material feeding is possible with the powerful motor and holding power. - Material feeding speed can be controlled in 3 stages: slow, medium, and high speed. - The tongs are equipped with guide rollers that firmly support the material and prevent peeling during material feeding. - Three cutters that cover the entire circumference reliably remove branches. ・The cutter is held by a simple spring type. ・Large tongs that are good at grappling work are effective in a wide range of tasks other than lumber construction, such as lumbering, piling, loading, and land clearing.

  • Product

    CT-500C/CS Compact high-power machine dedicated processor GP-532

Share this product


110+ people viewing

Last viewed: 18 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of CT-500C/CS Compact high-power machine dedicated processor GP-532

Image Part Number Price (excluding tax) Weight Feeding device Feeding force Feeding device type Ball cutting device type Ball cutting device cutting diameter Measuring device type Measuring device Diameter Limbing device Limbing diameter Limb removal device type Maximum opening width Maximum allowable load Turning angle How to operate Total height Full length Full width Tank capacity (chain oil)
CT-500C/CS Compact high-power machine dedicated processor GP-532-Part Number-GP-532 processor (CT-500C/CS small high-power machine only)

GP-532 processor (CT-500C/CS small high-power machine only)

Available upon quote

720kg

15.7kN

2 roller type

Hydraulic driven chainsaw method

53cm

Gear rotation pulse type

Grapple angle conversion

3~32cm

3 moving blade type

1,045mm

1,000kg

Full turn

Knob type combination switch x 2

1,160mm (to mounting pin)

1,335mm

960mm

4.3L

Other products of Iwafuji Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Iwafuji Industry Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

20.5hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree