All Categories

History

Factory painted product Urethane enamel
Otani Paint Co., Ltd.


About This Product

Environmentally friendly toluene (toluene/xylene free) 2-component urethane paint enamel *Other model numbers are available.

  • Product

    Factory painted product Urethane enamel

Share this product


620+ people viewing

Last viewed: 7 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Factory painted product Urethane enamel

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Pencil hardness Mixing ratio Packing style Acid resistance Impact resistance Alkali resistance Kinds Moist heat Standard application amount Dry to the touch Shiatsu drying Dilution rate Repeated cold and fever Exterior Painting method Pot life Solvent resistance Viscosity Polishing time Coating conditions: 23℃ Number of coatings Coating conditions 23℃ Application amount (g/shaku2) Drying time (recoating time) Drying time

Safety Waltz Urebon Surfacer SP White A liquid

Available upon quote -

A liquid: B liquid = 4:1

19kg set/5kg set

- - -

Undercoat for urethane enamel

-

10~12g/shaku2

13±3 minutes (23℃, 120μ applicator)

-

20~30% for A+B (cup gun, pressure feeding)
20% for A+B (brush)
10~20% of A+B (airless)
*All safety waltz diluted with polyurethane thinner

-

Liquid A: white, black, cloudy gray
B liquid colorless and transparent

Spray (including pressure feeding and airless), brush

Approximately 6 hours (23℃ 20% dilution)

Insoluble (swells) after 1 night
*Safety Waltz Uses polyurethane thinner

28±4 seconds (23℃, Zancup No.5 A+B stock solution)

After 1 hour (hand polished)

- -

1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel)

-

Safety Waltz Urebon Surfacer SP Black A liquid

Available upon quote -

A liquid: B liquid = 4:1

19kg set/5kg set

- - -

Undercoat for urethane enamel

-

10~12g/shaku2

13±3 minutes (23℃, 120μ applicator)

-

20~30% for A+B (cup gun, pressure feeding)
20% for A+B (brush)
10~20% of A+B (airless)
*All safety waltz diluted with polyurethane thinner

-

Liquid A: white, black, cloudy gray
B liquid colorless and transparent

Spray (including pressure feeding and airless), brush

Approximately 6 hours (23℃ 20% dilution)

Insoluble (swells) after 1 night
*Safety Waltz Uses polyurethane thinner

28±4 seconds (23℃, Zancup No.5 A+B stock solution)

After 1 hour (hand polished)

- -

1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel)

-

Safety Waltz Urebon Surfacer SP Base Liquid A

Available upon quote -

A liquid: B liquid = 4:1

19kg set/5kg set

- - -

Undercoat for urethane enamel

-

10~12g/shaku2

13±3 minutes (23℃, 120μ applicator)

-

20~30% for A+B (cup gun, pressure feeding)
20% for A+B (brush)
10~20% of A+B (airless)
*All safety waltz diluted with polyurethane thinner

-

Liquid A: white, black, cloudy gray
B liquid colorless and transparent

Spray (including pressure feeding and airless), brush

Approximately 6 hours (23℃ 20% dilution)

Insoluble (swells) after 1 night
*Safety Waltz Uses polyurethane thinner

28±4 seconds (23℃, Zancup No.5 A+B stock solution)

After 1 hour (hand polished)

- -

1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel)

-

Safety Waltz Urebon Surfacer SP B liquid

Available upon quote -

A liquid: B liquid = 4:1

19kg set/5kg set

- - -

Undercoat for urethane enamel

-

10~12g/shaku2

13±3 minutes (23℃, 120μ applicator)

-

20~30% for A+B (cup gun, pressure feeding)
20% for A+B (brush)
10~20% of A+B (airless)
*All safety waltz diluted with polyurethane thinner

-

Liquid A: white, black, cloudy gray
B liquid colorless and transparent

Spray (including pressure feeding and airless), brush

Approximately 6 hours (23℃ 20% dilution)

Insoluble (swells) after 1 night
*Safety Waltz Uses polyurethane thinner

28±4 seconds (23℃, Zancup No.5 A+B stock solution)

After 1 hour (hand polished)

- -

1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel)

-

Safety Waltz Urebon Surfacer for MDF Undercoat White A liquid

Available upon quote -

A liquid: B liquid = 2:1

22.5kg set

- - -

Undercoat for urethane enamel

-

10~12g/shaku2

6±2 minutes (23℃, 120μ applicator)

-

20~30% of A+B (diluted with Safety Waltz polyurethane thinner)
*Please use a gun diameter of 2~2.5mm.

-

Liquid A: white, black, cloudy gray
B liquid slightly yellow transparent

Spray

1.5 hours (23℃ 20% dilution)

Insoluble (swells) after 1 night
*Safety Waltz Uses polyurethane thinner

14±2 seconds (23℃, Zancup No.5 A+B stock solution)

After 1 hour (hand polished)

1~3

10~12

1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel)

1 hour or more

Safety Waltz Urebon Surfacer for MDF Undercoat Black A Liquid

Available upon quote -

A liquid: B liquid = 2:1

22.5kg set

- - -

Undercoat for urethane enamel

-

10~12g/shaku2

6±2 minutes (23℃, 120μ applicator)

-

20~30% of A+B (diluted with Safety Waltz polyurethane thinner)
*Please use a gun diameter of 2~2.5mm.

-

Liquid A: white, black, cloudy gray
B liquid slightly yellow transparent

Spray

1.5 hours (23℃ 20% dilution)

Insoluble (swells) after 1 night
*Safety Waltz Uses polyurethane thinner

14±2 seconds (23℃, Zancup No.5 A+B stock solution)

After 1 hour (hand polished)

1~3

10~12

1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel)

1 hour or more

Safety Waltz Urebon Surfacer for MDF Undercoat Base Liquid A

Available upon quote -

A liquid: B liquid = 2:1

22.5kg set

- - -

Undercoat for urethane enamel

-

10~12g/shaku2

6±2 minutes (23℃, 120μ applicator)

-

20~30% of A+B (diluted with Safety Waltz polyurethane thinner)
*Please use a gun diameter of 2~2.5mm.

-

Liquid A: white, black, cloudy gray
B liquid slightly yellow transparent

Spray

1.5 hours (23℃ 20% dilution)

Insoluble (swells) after 1 night
*Safety Waltz Uses polyurethane thinner

14±2 seconds (23℃, Zancup No.5 A+B stock solution)

After 1 hour (hand polished)

1~3

10~12

1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel)

1 hour or more

Safety Waltz Urebon Surfacer for MDF Undercoat B Liquid

Available upon quote -

A liquid: B liquid = 2:1

22.5kg set

- - -

Undercoat for urethane enamel

-

10~12g/shaku2

6±2 minutes (23℃, 120μ applicator)

-

20~30% of A+B (diluted with Safety Waltz polyurethane thinner)
*Please use a gun diameter of 2~2.5mm.

-

Liquid A: white, black, cloudy gray
B liquid slightly yellow transparent

Spray

1.5 hours (23℃ 20% dilution)

Insoluble (swells) after 1 night
*Safety Waltz Uses polyurethane thinner

14±2 seconds (23℃, Zancup No.5 A+B stock solution)

After 1 hour (hand polished)

1~3

10~12

1 to 8 hours (2-component urethane paint for enamel undercoat, 2-component urethane paint for intermediate coat, enamel)

1 hour or more

Safety Waltz Elegant Color #2000 Various colors A liquid

Available upon quote

2H (JIS K-5600 Mitsubishi Uni base material: steel plate)
*Coating film hardness will vary depending on the hardness of the base etc.

A liquid: B liquid = 5:1

18kg set/4.2kg set

No change (5% acetic acid spot, washed with water after 6 hours)

No abnormality (Dupont 30cm x 300g x 1/2)

No change (washed with water after 6 hours with 5% sodium carbonate)

Urethane enamel (2-component urethane paint topcoat)

No abnormalities (left on boiling water for 15 minutes)

8~10g/shaku2

10~15 minutes (10g/shaku2)

Approximately 1 hour (10g/shaku2)

40~50% of A+B (diluted with Safety Waltz polyurethane thinner)

No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours)

A liquid various colors
B liquid colorless and transparent

Spray

3 hours (23℃ 40% dilution)

- - - - - - -

Safety Waltz Elegant Color #2000 B liquid

Available upon quote

2H (JIS K-5600 Mitsubishi Uni base material: steel plate)
*Coating film hardness will vary depending on the hardness of the base etc.

A liquid: B liquid = 5:1

18kg set/4.2kg set

No change (5% acetic acid spot, washed with water after 6 hours)

No abnormality (Dupont 30cm x 300g x 1/2)

No change (washed with water after 6 hours with 5% sodium carbonate)

Urethane enamel (2-component urethane paint topcoat)

No abnormalities (left on boiling water for 15 minutes)

8~10g/shaku2

10~15 minutes (10g/shaku2)

Approximately 1 hour (10g/shaku2)

40~50% of A+B (diluted with Safety Waltz polyurethane thinner)

No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours)

A liquid various colors
B liquid colorless and transparent

Spray

3 hours (23℃ 40% dilution)

- - - - - - -

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Urethane Paints Products

Other products of Otani Paint Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Otani Paint Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree