Factory painted product 2-component urethane paint top coat matte (urethane flat)
Otani Paint Co., Ltd.
About This Product
Environmentally friendly (toluene/xylene free) interior 2-component urethane paint topcoat (urethane flat)
*Other model numbers are available.
-
Product
Factory painted product 2-component urethane paint top coat matte (urethane flat)
-
Handling Company
Otani Paint Co., Ltd.
-
Categories
10 Models of Factory painted product 2-component urethane paint top coat matte (urethane flat)
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Acid resistance | Adhesion (edge) | Alcohol resistance | Alkali resistance | Dilution rate | Dry to the touch | Exterior | Flexibility | Formaldehyde emission grade classification display | Impact resistance | Mixing ratio | Moist heat | Packing style | Painting method | Pencil hardness | Pot life | Repeated cold and fever | Shiatsu drying | Stain resistance source | Stain resistance soy sauce | Stain resistant crayon red | Stain resistant lipstick | Stain resistant magic black | Stain resistant magic red | Stain resistant whiskey | Standard application amount | Viscosity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Safety Waltz Urebon Flat One Grade Base Clear Liquid A |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) |
50~60% for A+B (cup gun) 45~50% of A+B (pressure feeding) 30~40% of A+B (airless) *All safety waltz diluted with polyurethane thinner |
5~6 minutes (8g/shaku2) |
Liquid A pale yellow cloudy color B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 4:1 | No abnormality (left on boiling water for 30 minutes) | 20L set/5L set | Spray | H~2H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | Approximately 5 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | 9~10 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
Approximately 50 seconds (23℃, IHS cup A+B stock solution) 20±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebon Flat One Grade 30% Disinfectant A Liquid |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) |
50~60% for A+B (cup gun) 45~50% of A+B (pressure feeding) 30~40% of A+B (airless) *All safety waltz diluted with polyurethane thinner |
5~6 minutes (8g/shaku2) |
Liquid A pale yellow cloudy color B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 4:1 | No abnormality (left on boiling water for 30 minutes) | 20L set/5L set | Spray | H~2H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | Approximately 5 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | 9~10 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
Approximately 50 seconds (23℃, IHS cup A+B stock solution) 20±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebon Flat One Grade 50% Disinfectant A Liquid |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) |
50~60% for A+B (cup gun) 45~50% of A+B (pressure feeding) 30~40% of A+B (airless) *All safety waltz diluted with polyurethane thinner |
5~6 minutes (8g/shaku2) |
Liquid A pale yellow cloudy color B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 4:1 | No abnormality (left on boiling water for 30 minutes) | 20L set/5L set | Spray | H~2H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | Approximately 5 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | 9~10 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
Approximately 50 seconds (23℃, IHS cup A+B stock solution) 20±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebone Flat One Grade 70% Disinfectant A Liquid |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) |
50~60% for A+B (cup gun) 45~50% of A+B (pressure feeding) 30~40% of A+B (airless) *All safety waltz diluted with polyurethane thinner |
5~6 minutes (8g/shaku2) |
Liquid A pale yellow cloudy color B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 4:1 | No abnormality (left on boiling water for 30 minutes) | 20L set/5L set | Spray | H~2H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | Approximately 5 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | 9~10 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
Approximately 50 seconds (23℃, IHS cup A+B stock solution) 20±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebon Flat One Grade 100% Disinfectant A Liquid |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) |
50~60% for A+B (cup gun) 45~50% of A+B (pressure feeding) 30~40% of A+B (airless) *All safety waltz diluted with polyurethane thinner |
5~6 minutes (8g/shaku2) |
Liquid A pale yellow cloudy color B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 4:1 | No abnormality (left on boiling water for 30 minutes) | 20L set/5L set | Spray | H~2H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | Approximately 5 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | 9~10 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
Approximately 50 seconds (23℃, IHS cup A+B stock solution) 20±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebone Flat One Grade 120% Disinfectant A Liquid |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) |
50~60% for A+B (cup gun) 45~50% of A+B (pressure feeding) 30~40% of A+B (airless) *All safety waltz diluted with polyurethane thinner |
5~6 minutes (8g/shaku2) |
Liquid A pale yellow cloudy color B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 4:1 | No abnormality (left on boiling water for 30 minutes) | 20L set/5L set | Spray | H~2H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | Approximately 5 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | 9~10 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
Approximately 50 seconds (23℃, IHS cup A+B stock solution) 20±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebone Flat One Grade 150% Disinfectant A Liquid |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) |
50~60% for A+B (cup gun) 45~50% of A+B (pressure feeding) 30~40% of A+B (airless) *All safety waltz diluted with polyurethane thinner |
5~6 minutes (8g/shaku2) |
Liquid A pale yellow cloudy color B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 4:1 | No abnormality (left on boiling water for 30 minutes) | 20L set/5L set | Spray | H~2H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | Approximately 5 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | 9~10 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
Approximately 50 seconds (23℃, IHS cup A+B stock solution) 20±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebone Flat One Grade B Liquid |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) |
50~60% for A+B (cup gun) 45~50% of A+B (pressure feeding) 30~40% of A+B (airless) *All safety waltz diluted with polyurethane thinner |
5~6 minutes (8g/shaku2) |
Liquid A pale yellow cloudy color B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 4:1 | No abnormality (left on boiling water for 30 minutes) | 20L set/5L set | Spray | H~2H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | Approximately 5 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | 9~10 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
Approximately 50 seconds (23℃, IHS cup A+B stock solution) 20±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebon Flat High Wrap Base Clear Liquid A |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) | 40~50% of A+B (diluted with Safety Waltz polyurethane thinner) | Approximately 10 minutes (8g/shaku2) |
Liquid A cloudy white B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 2:1 | No abnormality (left on boiling water for 30 minutes) | 45kg set/22.5kg set/6kg set | Spray | H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | 3~4 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | Approximately 25 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
18±2 (23℃, IHS cup A+B stock solution) 10±1 seconds (23℃, IHS cup A+B 50% dilution) |
|
Safety Waltz Urebon Flat Hi-wrap 30% quencher A liquid |
Available upon quote | No change (washed with water after 6 hours with 5% acetic acid) | 100/100 (urethane sanding, polysan, polysaf) | No change (60% ethanol spot, washed with water after 6 hours) | No change (washed with water after 6 hours with 5% sodium carbonate) | 40~50% of A+B (diluted with Safety Waltz polyurethane thinner) | Approximately 10 minutes (8g/shaku2) |
Liquid A cloudy white B liquid colorless and transparent |
2mmφ (mandrel bending test) | F☆☆☆☆ | No abnormality (Dupont 50cm x 300g) | A liquid: B liquid = 2:1 | No abnormality (left on boiling water for 30 minutes) | 45kg set/22.5kg set/6kg set | Spray | H (JIS K-5600 Mitsubishi Uni base material: Bakelite) | 3~4 hours (23℃ 50% dilution) | No change for 6 cycles (80℃ x 2 hours ⇔ -20℃ x 2 hours) | Approximately 25 minutes (8g/shaku2) | No change (24 hour spot wash) | No change (24 hour spot wash) | No change (wiped with neutral detergent 24 hours after drawing) | No change (wiped with neutral detergent 24 hours after drawing) | No change (24 hours after drawing, wiped with benzine) | No change (24 hours after drawing, wiped with benzine) | No change (24 hour spot wash) | 7~9g/shaku2 |
18±2 (23℃, IHS cup A+B stock solution) 10±1 seconds (23℃, IHS cup A+B 50% dilution) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Otani Paint Co., Ltd.
View more products of Otani Paint Co., Ltd.
About Company Handling This Product
- Japan