All Categories

History

Flying probe tester APT-1340J-APT-1340J
Flying probe tester APT-1340J-Takaya Co., Ltd.

Flying probe tester APT-1340J
Takaya Co., Ltd.

🚗 Automotive & Transport Use 💻 Electronics & Electrical Use 🚀 Aerospace Industry Use

About This Product

■Continuing to evolve testing capabilities

This is a flying probe type in-circuit tester that reliably detects any defects on mounted boards with ultra-high-speed inspection. Takaya Corporation developed and began selling this "Flying Probe Tester" in 1987. We are a pioneer in the mounted board inspection machine industry, and even today we boast one of the top market shares in the industry. We have an extensive lineup that can meet all inspection needs, including high-speed, high-precision inspection, double-sided inspection, large and heavy board support, and special customization. We will continue to develop products that respond to the diversification of mounted board inspections and even faster speeds.

■Takaya's strengths

1.Probe contact control The descending speed of the probe can be controlled in 16 steps. For delicate workpieces such as FPCs, the probe maintains high-speed operation but decelerates at the moment of contact with the board to minimize impact. In addition, if there is a flux coating on the solder surface, hard contact is performed to improve inspection reliability, achieving stable inspection of all types of boards. 2. Expansion of inspection area The unique 4-head & 6-flying probe system allows you to add 2 vertical probes to the standard 4 tilt probes. This makes it possible to contact points that were previously inaccessible, such as contact points between high parts and upward facing connectors, further increasing defect detection ability. 3. Compatible with smart factories We provide multiple interfaces to easily connect to your factory network. It contributes to continuous improvement of QCD (quality, cost, delivery) in production activities by establishing quick and detailed traceability, visualizing inspection status, and responding quickly to problems. 4.Measurement system that can detect any defects Equipped with a DC/AC measurement system that can handle various inspection targets. In addition to the main body measurement unit, all flying heads are equipped with a small measurement unit, ensuring absolute accuracy and reliability even with minute impedances and capacitances without being affected by cable length or noise. It can be measured by gender. 5. Compatible with special shaped boards We use a uniquely designed split clamp. A jig is not required even for boards with special shapes or boards with connectors or parts protruding from the end surface.

  • Product

    Flying probe tester APT-1340J
  • Usage Scenarios

    Automotive & Transport Use / Electronics & Electrical Use / Aerospace Industry Use

Share this product


290+ people viewing

Last viewed: 5 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Flying probe tester APT-1340J

Image Part Number Price (excluding tax) Testable board dimensions Testable board thickness Mounted component height (max.) Resistance Board weight (max.) Board clamp space Frequency Overall dimensions/weight Relay / Photocoupler / Switch element Transformer Zener diode voltage Diode / Transistor / FET Short check Capacitance Open check Impedance/phase angle Inductance PN junction VF measurement DC voltage/current AC voltage
Flying probe tester APT-1340J-Part Number-APT-1340J

APT-1340J

Available upon quote

L50 × D50mm - L540 × D483mm

0.6 - 5.0mm

Top side 60mm
Bottom side 120mm

5mΩ~50MΩ *Custom 2mΩ~

5kg

Top surface: 3mm from the back/front edge
Bottom surface: 3mm from the back/front edge

1Hz~20MHz/2V~20Vp-p

W1,400×D1,500×H1,400mm 1,350kg

ON test

Inductance, turns ratio, phase difference

0.1V~40V (option: up to max.80V)

PN junction VF measurement, ON test, gain, characteristics

Threshold value can be set from 1Ω to 500KΩ (standard 10Ω or less)

0.5pF~200mF

Threshold value can be set from 5Ω to 50MΩ (standard 100Ω or more)

2.5Ω~3.3MΩ / ±90°

0.5μH~500H

0.1V~40V

±125V / ±1A (option: up to ±2A)

150mV~75Vrms,f=10Hz~0.5MHz

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More In-Circuit Board Testers Products

Other products of Takaya Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Takaya Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree