Mirror mount inch mirror horizontal type | First Mechanical Design Co., Ltd.

3 Models of Mirror mount inch mirror horizontal type

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Mass	Adjustment angle (rotation direction)	Adjustment angle (tilt direction)	Adjustment screw	Surface treatment	Material	Body fixed	Maximum thickness	Resolution	Mirror diameter
MH050IH_B	Available upon quote	Approximately 46.7g (excluding mirror weight)	±2.5° However, it can be adjusted up to ±3.5° by adjusting the spring screw.	±2.5° However, it can be adjusted up to ±3.5° by adjusting the spring screw.	Three-point independent adjustment method ・The position of the reflective surface can be changed by moving the three adjustment screws by the same amount. ・Screw pitch is 0.15mm	Alumite (Nashiji dyeing/Red Brown)	Extra super duralumin	M4X10 hexagon socket head bolt (fixed with one from above)	23mm or less (at standard adjustment position)	0.00125° (=0.45°/360°, 22μrad) Displacement amount (angle) when rotated by 1°, 0.45° displacement per rotation	Φ1/2 Thickness = about 3~9.5mm
MH100IH_AN/A	Available upon quote	Approximately 99.5g (excluding mirror weight)	±2° However, it can be adjusted up to ±3.5° by adjusting the spring screw.	±2° However, it can be adjusted up to ±3.5° by adjusting the spring screw.	±2° However, it can be adjusted up to ±3.5° by adjusting the spring screw.	Alumite (Nashiji dyeing/Red Brown)	Extra super duralumin	Three-point independent adjustment method ・The position of the reflective surface can be changed by moving the three adjustment screws by the same amount. ・Screw pitch is 0.15mm	30 mm or less (excluding the part protruding from the mirror holder for adjustment screw types with knob knobs)	0.0007958°= (0.2865°/360°, 14μrad) Displacement amount (angle) when rotated by 1 degree.One rotation results in a displacement of 0.2865 degrees.	Φ1 Thickness = about 5 to 9.5 mm (maximum is about 15 mm)
MH200IH_AN/A	Available upon quote	Approximately 219g (excluding mirror weight, excluding knob weight)	±2° However, it can be adjusted up to ±3.5° by adjusting the spring screw.	±2° However, it can be adjusted up to ±3.5° by adjusting the spring screw.	Three-point independent adjustment method ・The position of the reflective surface can be changed by moving the three adjustment screws by the same amount. ・Screw pitch is 0.25mm	Alumite (Nashiji dyeing/Red Brown)	Extra super duralumin	・M4X15 hexagon socket head bolts (3 pieces) ・Since there are two mounting positions, you can choose according to the surrounding situation.	30 mm or less (excluding the part protruding from the mirror holder for adjustment screw types with knob knobs)	0.000686° (thread pitch 0.25) = 0.247°/360° ・Displacement amount (angle) per rotation: 0.247° displacement per rotation ・You can change the screw pitch to 0.15mm and increase the resolution by 0.6 times.	Φ2 Thickness = 5~9.5mm (maximum is about 15mm)

Image

Part Number

Price (excluding tax)

Mass

Adjustment angle (rotation direction)

Adjustment angle (tilt direction)

Adjustment screw

Surface treatment

Material

Body fixed

Maximum thickness

Resolution

Mirror diameter

MH050IH_B

Available upon quote

Approximately 46.7g (excluding mirror weight)

±2.5°
However, it can be adjusted up to ±3.5° by adjusting the spring screw.

Three-point independent adjustment method
・The position of the reflective surface can be changed by moving the three adjustment screws by the same amount.
・Screw pitch is 0.15mm

Alumite (Nashiji dyeing/Red Brown)

Extra super duralumin

M4X10 hexagon socket head bolt (fixed with one from above)

23mm or less (at standard adjustment position)

0.00125° (=0.45°/360°, 22μrad)
Displacement amount (angle) when rotated by 1°, 0.45° displacement per rotation

Φ1/2
Thickness = about 3~9.5mm

MH100IH_AN/A

Available upon quote

Approximately 99.5g (excluding mirror weight)

±2°
However, it can be adjusted up to ±3.5° by adjusting the spring screw.

Alumite (Nashiji dyeing/Red Brown)

Extra super duralumin

Three-point independent adjustment method
・The position of the reflective surface can be changed by moving the three adjustment screws by the same amount.
・Screw pitch is 0.15mm

30 mm or less (excluding the part protruding from the mirror holder for adjustment screw types with knob knobs)

0.0007958°= (0.2865°/360°, 14μrad)
Displacement amount (angle) when rotated by 1 degree.One rotation results in a displacement of 0.2865 degrees.

Φ1
Thickness = about 5 to 9.5 mm (maximum is about 15 mm)

MH200IH_AN/A

Available upon quote

Approximately 219g (excluding mirror weight, excluding knob weight)

±2°
However, it can be adjusted up to ±3.5° by adjusting the spring screw.

Three-point independent adjustment method
・The position of the reflective surface can be changed by moving the three adjustment screws by the same amount.
・Screw pitch is 0.25mm

Alumite (Nashiji dyeing/Red Brown)

Extra super duralumin

・M4X15 hexagon socket head bolts (3 pieces)
・Since there are two mounting positions, you can choose according to the surrounding situation.

30 mm or less (excluding the part protruding from the mirror holder for adjustment screw types with knob knobs)

0.000686° (thread pitch 0.25) = 0.247°/360°
・Displacement amount (angle) per rotation: 0.247° displacement per rotation
・You can change the screw pitch to 0.15mm and increase the resolution by 0.6 times.

Φ2
Thickness = 5~9.5mm (maximum is about 15mm)

Click on the part number for more information about each product