1 inch mirror mount motor drive type MH100IH_MDRV-MH100IH_MDRV

1 inch mirror mount motor drive type MH100IH_MDRV
First Mechanical Design Co., Ltd.

About This Product

MH100IH_MDRV is a 1-inch mirror mount whose rotation and tilting directions can be controlled remotely using a DC geared motor. It is also possible to adjust the visibility of the interferometer by adjusting the speed adjustment volume of the dedicated controller to the low speed side. After the adjustment is completed, the special mechanism will keep the position in place and the visibility will be extremely stable.

By changing the mounting surface, one part can be used in both left and right directions. The external size is also much more compact than conventional mirror mounts with motor drives, making it a versatile mirror mount that doesn't take up any extra space.

■Others・Can be used transparently
・Straight: φ24 (Clear Aperture), 45° transmission: Approximately φ14 when mirror thickness is 6.35
・An AC adapter (equivalent to GOFORWARD GF12-US0618) is included with the controller.
・The cable length between the main unit and the controller is approximately 450mm.
・The connector is D-Sub 9 pin (male), so it can be extended if you prepare a D-Sub 9 pin (female/male) cable on both ends.
・Since the adjustment position does not change even if the power is turned off after adjustment, it is also possible to disconnect the connector from the controller and connect another mirror mount (MH100IH_MDRV) for adjustment.
・"OUT" on the back panel of the controller is a reserve for external output.

Model
There is 1 model available for this product.

Product
1 inch mirror mount motor drive type MH100IH_MDRV

Handling Company
First Mechanical Design Co., Ltd.

230+ people viewing

Last viewed: 7 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of 1 inch mirror mount motor drive type MH100IH_MDRV

Image	Part Number	Price (excluding tax)	Mass	Adjustment screw	Surface treatment	Material	External dimensions	Fixing screw	Resolution	Mirror diameter
	MH100IH_MDRV	Available upon quote	Approximately 166g (excluding mirror weight including relay board and cable assembly)	Thread pitch 0.15mm, three-point independent adjustment method (The two axes in the rotation direction and tilt direction are motor driven)	Nashiji gray alumite	Extra super duralumin	Width 47 x Height 47 x Depth 41.8mm (*1.3/standard adjustment position, excluding relay board and cable assembly)	M4X15 hexagon socket head bolt (1 piece)	0.000823° (0.2963°/360°, 14.4μrad) ・The amount of displacement when rotated by 1° is 0.2963° displacement when rotated once. ・Fine adjustment is possible by applying a low voltage for a short time using a DC geared motor	Φ1 Thickness = 5~9.5mm

Image

Part Number

Price (excluding tax)

Mass

Adjustment screw

Surface treatment

Material

External dimensions

Fixing screw

Resolution

Mirror diameter

MH100IH_MDRV

Available upon quote

Approximately 166g (excluding mirror weight including relay board and cable assembly)

Thread pitch 0.15mm, three-point independent adjustment method
(The two axes in the rotation direction and tilt direction are motor driven)

Nashiji gray alumite

Extra super duralumin

Width 47 x Height 47 x Depth 41.8mm (*1.3/standard adjustment position, excluding relay board and cable assembly)

M4X15 hexagon socket head bolt (1 piece)

0.000823° (0.2963°/360°, 14.4μrad)
・The amount of displacement when rotated by 1° is 0.2963° displacement when rotated once.
・Fine adjustment is possible by applying a low voltage for a short time using a DC geared motor

Φ1
Thickness = 5~9.5mm