All Categories

History

Drum type magnetic separator general type-DPT-3020
Drum type magnetic separator general type-Nippon Magnetic Separation Co., Ltd.

Drum type magnetic separator general type
Nippon Magnetic Separation Co., Ltd.

Nippon Magnetic Separation Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

2.3hours

Very Fast Response


About This Product

Suitable for sorting relatively small materials such as foundry sand and wood chips. High-quality separation is possible because raw materials are brought into direct contact with the sorting surface.                                                                   

■Equipment overview

This machine is a machine that separates raw materials supplied onto a drum into magnetic and non-magnetic materials. Magnetic materials are attracted to the drum surface, transported by the rotation of the drum, and discharged from the magnetic material discharge port. Non-magnetic materials separate and fall from the drum surface and are discharged from the non-magnetic material discharge port. It is also possible to manufacture a product with a vibrating feeder to uniformly supply a fixed amount to the effective width of the magnetic drum. Furthermore, we can also manufacture high-speed rotation specifications that use FRP drums instead of stainless steel drums, as well as electromagnetic and permanent magnet combination models that are suitable for collecting large magnetic materials.

■Equipment structure

A permanent magnet is placed inside the drum so that about half the circumference of the drum becomes a magnetic field. The shaft that supports the internal magnet group is fixed, and only the outer drum rotates. The position of the magnetic pole and the angle of the separator plate can be changed arbitrarily according to the processing conditions. The drum is driven and rotated by a reduction motor via a roller chain.

■Example of processed materials

Steel slag, waste molten slag, limestone, construction waste (concrete waste), shredded automobiles (car shredders), shredded home appliances and circuit boards (wasted home appliances), shredded bulky trash, shredded non-combustible trash, trash incineration ash, waste plastic , paper waste, foundry sand, crushed wood chips, crushed tires, crushed waste pachinko machines, crushed transformers (PCB) , gypsum board, rice, flour, feed, dry batteries, cut wire, crushed fluorescent tubes, etc. *Magnetic flux density varies depending on the device configuration. It is also possible to design with lower magnetic flux density. *Other product numbers are available.

  • Product

    Drum type magnetic separator general type

Share this product


480+ people viewing

Last viewed: 4 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Drum type magnetic separator general type

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Effective magnetic pole width (mm) Maximum magnetic flux density (Tesla) Drum diameter (mm)
Drum type magnetic separator general type-Part Number-DPT-3020

DPT-3020

Available upon quote

200

0.08
*For drum thickness 3mm

300

Drum type magnetic separator general type-Part Number-DPT-3030

DPT-3030

Available upon quote

300

0.08
*For drum thickness 3mm

300

Drum type magnetic separator general type-Part Number-DPT-3040

DPT-3040

Available upon quote

400

0.08
*For drum thickness 3mm

300

Drum type magnetic separator general type-Part Number-DPT-3050

DPT-3050

Available upon quote

500

0.08
*For drum thickness 3mm

300

Drum type magnetic separator general type-Part Number-DPT-3060

DPT-3060

Available upon quote

600

0.08
*For drum thickness 3mm

300

Drum type magnetic separator general type-Part Number-DPT-4630

DPT-4630

Available upon quote

300

0.15
*For drum thickness 5mm

465

Drum type magnetic separator general type-Part Number-DPT-4645

DPT-4645

Available upon quote

450

0.15
*For drum thickness 5mm

465

Drum type magnetic separator general type-Part Number-DPT-4660

DPT-4660

Available upon quote

600

0.15
*For drum thickness 5mm

465

Drum type magnetic separator general type-Part Number-DPT-4675

DPT-4675

Available upon quote

750

0.15
*For drum thickness 5mm

465

Drum type magnetic separator general type-Part Number-DPT-4690

DPT-4690

Available upon quote

900

0.15
*For drum thickness 5mm

465

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Magnetic Separators Products

Other products of Nippon Magnetic Separation Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Nippon Magnetic Separation Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

2.3hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree