All Categories

History

Communication SPD (for communication/signal) SD-ASG-SD
Communication SPD (for communication/signal) SD-Showden Co., Ltd.

Communication SPD (for communication/signal) SD
Showden Co., Ltd.

Showden Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

117.8hours


About This Product

■Summary

The ASG series is used in combination with an ASG-SPD unit with fault indication and a dedicated power supply unit/alarm unit (and surge counter unit). This is an SPD failure monitoring system that transmits the SPD failure status from the SPD installation location (on-site) to a remote monitoring system.

■Fault display function

By connecting the dedicated power supply unit and alarm unit, the SPD failure status can be displayed on the front LED lamp. Additionally, faults can be output via contact and can be sent to a distant monitoring system.

■Excellent protection circuit mechanism

We offer protection circuit types suitable for the circuits to be protected (communications, signals, instrumentation, etc.). In addition, the fault contact output circuit and power input circuit (alarm unit) are equipped with protection circuits as standard, so there is no need to install a separate SPD for the alarm circuit or SPD for the power circuit.

■Complete range of anti-ground noise countermeasure products

ASZ-Z series (noise-resistant connection) and ASG-HF type are available as anti-ground noise countermeasure products.

■Features

・The number of protection fibers per SPD is large, contributing to space saving (4 to 5 cores) ・Compliant with JISC5381-21 categories C2 and D1 - Suitable for protecting NTT general telephone lines and data communication lines. - GDT and TSS are implemented between the ground and the design allows for the circuit voltage of the telephone line. Additionally, a thermistor is installed as a countermeasure against alternating current contact with the communication line.

  • Product

    Communication SPD (for communication/signal) SD

Share this product


270+ people viewing

Last viewed: 9 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Communication SPD (for communication/signal) SD

Image Part Number Price (excluding tax) Voltage protection level (Up) between earth Voltage protection level (Up) between lines Protection mode between lines Protection mode between ground Applicable wire Alarm contact output DC resistance DC operating voltage V1mA line to line DC operating voltage V1mA between ground Purpose Environmental conditions Maximum continuous working voltage Uc Failure display Connection terminal Insertion loss Rated current Rated voltage Line compatibility Building equipment Telephone/ISDN/ADSL line Installation method Number of protection hearts Transmission frequency band (110Ω) Impulse durability category D1 between ground Impulse durability category C2 between lines Impulse durability category C2 between ground Impulse limit voltage between lines Impulse limit voltage between ground
Communication SPD (for communication/signal) SD-Part Number-ASG-SD

ASG-SD

Available upon quote

400V or less

360V or less

Between terminals 1 and 2

Between terminals 1, 2 and 6 (ground)

Solid wire: 0.35~1.82mm2 Twisted wire: 0.2~2.63mm2 AWG: 26~14 wire is crimped to M3 crimp terminal (M3 slim for stranded wire 2mm2) and wired.

Contact terminal: ASG-AL terminals A, B, C Contact specification: 1C contact Contact rating: AC220V 1A, DC110V 0.5A

4~13Ω or less (1 wire)

DC184~320V

DC230V±20%

General telephone line, ISDN, ADSL

Temperature: -40℃~+70℃ Humidity: 95% or less (no condensation)

DC180V

Normal: LED (red) goes off Deterioration/failure: LED (red) lights up

M3 screw terminal (for round crimp terminal M3 slim) Maximum width of compatible round crimp terminal: 6.0 mm or less

1.5dB or less

DC/AC 130mA

DC170V

Screw mounting using rail (35mm width rail) and mounting bracket (optional)

2 cores

DC~10MHz

10/350μs 5kA

8/20μs 4kA

8/20μs 10kA

350V or less

350V or less

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Lightning Arresters Products

Other products of Showden Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Showden Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

117.8hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree