All Categories

History

Power supply SPD FLT-SEC series-FLT-SEC-P-T1-1C-350/25-FM
Power supply SPD FLT-SEC series-Showden Co., Ltd.

Power supply SPD FLT-SEC series
Showden Co., Ltd.

Showden Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

117.8hours


About This Product

■JIS C 5381-11 Iimp25kA or 50kA Class I/Class II SPD

In addition to the single-pole type FLT-SEC-P-T1 series, the multi-pole type FLT-SEC-T1+T2 series has been added to the lineup. There is a lineup with Iimp per phase of 25kA and 50kA. The main body consists of a plug and a base, and comes standard with an alarm contact output (mechanical) and a fault indicator (mechanical). It also complies with JIS C 5381-11, as well as CE and UL.

■Follow current breaking rating 50kA

Although it is a gap type with a large Iimp, it has achieved a follow-on current interruption rating of 50kA. Therefore, it is possible to connect even power supply circuits with large short circuit currents (50kA or less). (Follow current refers to the phenomenon in which a short circuit occurs in the power supply after lightning surge current is applied to the SPD.)

■Fault display mechanism and alarm contact output are standard equipment.

In order to minimize the risk of failure, it is equipped with a failure display mechanism and alarm contact output as standard equipment.

■Plug can be rotated 180°

The plug can be rotated 180°, so the SPD display (plug) can be oriented upwards even if the wire is pulled in from below.

■Mounting location

Indoors or inside the panel

■External dimensions (mm)

35.6×95.2×74.5

■Installation method

Rail mounting (35mm width)

  • Product

    Power supply SPD FLT-SEC series

Share this product


510+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of Power supply SPD FLT-SEC series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Voltage protection level Up N-PE Voltage protection level Up L-PE Voltage protection level Up L-N Protection mode Applicable wire Alarm contact Test standards Exam class Follow current breaking rating N-PE Follow-on current breaking rating between L-N Temperature/humidity Structure Maximum continuous working voltage Uc Failure display Recommended wire Connection terminal Specified SPD separator Short circuit current 100kA or less Specified SPD separator Required quantity Nominal discharge current In N-PE Nominal discharge current In L-N Three-phase 4-wire Y connection Neutral point grounding 240V/415V Three-phase 4-wire Y connection, neutral point grounding 100V/173V Three-phase three-wire Y connection, neutral point grounding 415V Impulse discharge current between N-PE Impulse discharge current between L-N Single phase 3 wire neutral wire grounding 100V/200V Single phase 2 wire neutral point grounding 200V Three-phase three-wire delta connection one-wire grounding 200V Single phase 2 wire 1 wire grounding 200V Single phase 2 wire 1 wire grounding 100V
Power supply SPD FLT-SEC series-Part Number-FLT-SEC-P-T1-1C-350/25-FM

FLT-SEC-P-T1-1C-350/25-FM

Available upon quote - -

1.5kV

L-N

5.5mm2~22mm2

Mechanical

JIS C 5381-11

Class I/Class II

100A

50kA

Operating and storage temperature: -40℃~+80℃ Relative humidity: 95% or less

Plugin

AC350V

Normal: Green When faulty: Red

Line side 8mm2 Ground side 14mm2 or more

Plug-in terminal

S201312/US221M (with alarm contact) US221 (without alarm contact)

1 set

-

25kA

●3 units

●3 units

●3 units

-

25kA

●2 units

●2 units

●2 units

●1 unit

●1 unit

Power supply SPD FLT-SEC series-Part Number-FLT-SEC-P-T1-1C-264/50-FM

FLT-SEC-P-T1-1C-264/50-FM

Available upon quote - -

2.5kV

L-N

5.5mm2~22mm2

Mechanical

JIS C 5381-11

Class I/Class II

100A

50kA

Operating and storage temperature: -40℃~+80℃ Relative humidity: 95% or less

Plugin

AC264V

Normal: Green When faulty: Red

Line side 8mm2 Ground side 14mm2 or more

Plug-in terminal

S201312/US221M (with alarm contact) US221 (without alarm contact)

1 set

-

50kA

-

●3 units

- -

50kA

●2 units

●2 units

●2 units

●1 unit

●1 unit

Power supply SPD FLT-SEC series-Part Number-FLT-SEC-P-T1-N/PE-350/100-FM

FLT-SEC-P-T1-N/PE-350/100-FM

Available upon quote

1.5kV

- -

N-PE

5.5mm2~22mm2

Mechanical

JIS C 5381-11

Class I/Class II

100A

-

Operating and storage temperature: -40℃~+80℃ Relative humidity: 95% or less

Plugin

AC350V

Normal: Green When faulty: Red

Line side 8mm2 Ground side 14mm2 or more

Plug-in terminal

- -

100kA

-

●1 unit

●1 unit

●1 unit

100kA

-

●1 unit

●1 unit

●1 unit

●1 unit

●1 unit

Power supply SPD FLT-SEC series-Part Number-FLT-SEC-T1+T2-1S-350/25-FM

FLT-SEC-T1+T2-1S-350/25-FM

Available upon quote

1.5kV

2.2kV

1.5kV

L-N・N-PE・L-PE

5.5mm2~22mm2

Mechanical

JIS C 5381-11

Class I/Class II

100A

25kA

Operating and storage temperature: -40℃~+80℃ Relative humidity: 95% or less

Plugin

AC350V

Normal: Green When faulty: Red

Line side 8mm2 Ground side 14mm2 or more

Plug-in terminal

S201312/US221M (with alarm contact) US221 (without alarm contact)

1 set

100kA

25kA

●3 units

●3 units

●3 units

100kA

25kA

- - -

●1 unit

●1 unit

Power supply SPD FLT-SEC series-Part Number-FLT-SEC-T1+T2-2S-350/25-FM

FLT-SEC-T1+T2-2S-350/25-FM

Available upon quote

1.5kV

2.2kV

1.5kV

L-N・N-PE・L-PE

5.5mm2~22mm2

Mechanical

JIS C 5381-11

Class I/Class II

100A

25kA

Operating and storage temperature: -40℃~+80℃ Relative humidity: 95% or less

Plugin

AC350V

Normal: Green When faulty: Red

Line side 8mm2 Ground side 14mm2 or more

Plug-in terminal

S201312/US221M (with alarm contact) US221 (without alarm contact)

2 sets

100kA

25kA

- - -

100kA

25kA

●1 unit

●1 unit

●1 unit

- -
Power supply SPD FLT-SEC series-Part Number-FLT-SEC-T1+T2-3S-350/25-FM

FLT-SEC-T1+T2-3S-350/25-FM

Available upon quote

1.5kV

2.2kV

1.5kV

L-N・N-PE・L-PE

5.5mm2~22mm2

Mechanical

JIS C 5381-11

Class I/Class II

100A

25kA

Operating and storage temperature: -40℃~+80℃ Relative humidity: 95% or less

Plugin

AC350V

Normal: Green When faulty: Red

Line side 8mm2 Ground side 14mm2 or more

Plug-in terminal

S201312/US221M (with alarm contact) US221 (without alarm contact)

3 sets

100kA

25kA

●1 unit

●1 unit

●1 unit

100kA

25kA

- - - - -

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Lightning Arresters Products

Other products of Showden Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Showden Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

117.8hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree