All Categories

History

2.4GHz low power wireless module TS2410-TS2410-01-S-mdm
2.4GHz low power wireless module TS2410-Nomura Engineering Co., Ltd.

2.4GHz low power wireless module TS2410
Nomura Engineering Co., Ltd.

Nomura Engineering Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

28.3hours

Relatively Fast Response


About This Product

■2.4GHz band, high output of 10mW class

In addition to improving transmission output, it enables switching of transmission output and supports 17 types of external antennas, enabling high-speed data wireless communication for a wider range of applications, from short distances to medium and long distances. It is also possible to communicate in frequency bands that are not affected by wireless LAN.

■Summary

The TS2410 is a small device-embedded wireless module that uses the 2.4GHz band and provides wireless communications such as M2M (device-to-device communication) and IoT (Internet of Things). Operated by battery, wireless communication with a line-of-sight of approximately 150m is possible with a transmission power of 10mW class. It is also possible to communicate in a frequency band that is free from wireless LAN interference. The interface supports UART and SPI. In addition to chip antennas and dipole antennas, we also support metal surface attachment types and Yagi types, so you can choose according to your application. It has received construction design certification in Japan (conforms to ARIB STD-T66 and RCR STD-33), so it can be used without a license.

■Features

・It is also possible to communicate over short distances by lowering the transmission power. ・Supports dual mode of ARIB STD-T66 (66 mode) and RCR STD-33 (33 mode). ・RCR STD-33 (33 mode) allows communication in a frequency band that is free from wireless LAN interference. - Communication interfaces include asynchronous serial (19,200bps) and SPI (1Mbps). ・There are two antenna terminal systems, which can be switched by command. ・Low voltage, low power consumption operation 2.1V to 3.6V, TX 38mA, RX 20mA ・Modulation speed and transmission power can be switched ・Controlled by UART communication or SPI communication - Obtained construction design certification (technical compliance) in Japan (ARIB STD T-66 and RCR STD-33) ・RoHS compliant ・Please contact us regarding overseas use, firmware customization, etc. ・There are other features as well.

■Product composition

TS2410-xx-S/D-mdm 1. xx: Antenna designation Please check the product model number description for details. 2. I/F connector pin header ・S: SMT (Surface mount) Gradconn BB02-BS121-KA3-030A00 ・D: DIP (Lead) Gradconn BB02-BC121-KF2-302500

  • Product

    2.4GHz low power wireless module TS2410

Share this product


390+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

8 Models of 2.4GHz low power wireless module TS2410

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply voltage Weight Communication interface Transmission/reception frequency 66 modes Transmission/reception frequency 33 modes Transmission power 66 modes Transmission power 33 modes Transmission power Oscillation method Compliant standards Attached items Current consumption Connection method Size Modulation method Receiving sensitivity Operating temperature Storage temperature Transmission speed Antenna
2.4GHz low power wireless module TS2410-Part Number-TS2410-01-S-mdm

TS2410-01-S-mdm

Available upon quote

DC2.1V~3.6V

Approximately 2g

Asynchronous serial (19,200bps) and SPI (1Mbps)

2,401MHz~2,482MHz/total 82ch

2,473~2,495MHz/frequency hopping

6mW +20/-80% (1mW when modulation speed is set to 2Mbps)

1.2mW/MHz~3.5mW/MHz, +20/-80%

0.01mW~10mW class (switchable)

Synthesizer method controlled by crystal oscillation

ARIB STD-T66 (66 modes), RCR STD-33 (33 modes)

1.27mm 12-pin header x 1 (If you purchase the wireless module separately, a pin header will be attached. Choose from DIP type or SMT type)

When transmitting: Approx. 38mA (25℃, 3.0V, 10mW, 2Mbps)

1.27mm pitch 12 pin connector

31×25×3.1 (length x width x height (mm), excluding protrusions)

GFSK

-94dBm or less @0.1%BER (250kbps)

-20℃~70℃

-30℃~+80℃ (no condensation)

2Mbps, 1Mbps, 250kbps

Built-in chip antenna specification or external antenna specification (External antennas are compatible with 8 types of omnidirectional antennas (waterproof type available), 3 types of stick-on patch antennas, 3 types of metal surface stick-on patch antennas, and 2 types of Yagi antennas)

2.4GHz low power wireless module TS2410-Part Number-TS2410-01-D-mdm

TS2410-01-D-mdm

Available upon quote

DC2.1V~3.6V

Approximately 2g

Asynchronous serial (19,200bps) and SPI (1Mbps)

2,401MHz~2,482MHz/total 82ch

2,473~2,495MHz/frequency hopping

6mW +20/-80% (1mW when modulation speed is set to 2Mbps)

1.2mW/MHz~3.5mW/MHz, +20/-80%

0.01mW~10mW class (switchable)

Synthesizer method controlled by crystal oscillation

ARIB STD-T66 (66 modes), RCR STD-33 (33 modes)

1.27mm 12-pin header x 1 (If you purchase the wireless module separately, a pin header will be attached. Choose from DIP type or SMT type)

When transmitting: Approx. 38mA (25℃, 3.0V, 10mW, 2Mbps)

1.27mm pitch 12 pin connector

31×25×3.1 (length x width x height (mm), excluding protrusions)

GFSK

-94dBm or less @0.1%BER (250kbps)

-20℃~70℃

-30℃~+80℃ (no condensation)

2Mbps, 1Mbps, 250kbps

Built-in chip antenna specification or external antenna specification (External antennas are compatible with 8 types of omnidirectional antennas (waterproof type available), 3 types of stick-on patch antennas, 3 types of metal surface stick-on patch antennas, and 2 types of Yagi antennas)

2.4GHz low power wireless module TS2410-Part Number-TS2410-xx-S-mdm (omnidirectional antenna)

TS2410-xx-S-mdm (omnidirectional antenna)

Available upon quote

DC2.1V~3.6V

Approximately 2g

Asynchronous serial (19,200bps) and SPI (1Mbps)

2,401MHz~2,482MHz/total 82ch

2,473~2,495MHz/frequency hopping

6mW +20/-80% (1mW when modulation speed is set to 2Mbps)

1.2mW/MHz~3.5mW/MHz, +20/-80%

0.01mW~10mW class (switchable)

Synthesizer method controlled by crystal oscillation

ARIB STD-T66 (66 modes), RCR STD-33 (33 modes)

1.27mm 12-pin header x 1 (If you purchase the wireless module separately, a pin header will be attached. Choose from DIP type or SMT type)

When transmitting: Approx. 38mA (25℃, 3.0V, 10mW, 2Mbps)

1.27mm pitch 12 pin connector

31×25×3.1 (length x width x height (mm), excluding protrusions)

GFSK

-94dBm or less @0.1%BER (250kbps)

-20℃~70℃

-30℃~+80℃ (no condensation)

2Mbps, 1Mbps, 250kbps

Built-in chip antenna specification or external antenna specification (External antennas are compatible with 8 types of omnidirectional antennas (waterproof type available), 3 types of stick-on patch antennas, 3 types of metal surface stick-on patch antennas, and 2 types of Yagi antennas)

2.4GHz low power wireless module TS2410-Part Number-TS2410-xx-D-mdm (omnidirectional antenna)

TS2410-xx-D-mdm (omnidirectional antenna)

Available upon quote

DC2.1V~3.6V

Approximately 2g

Asynchronous serial (19,200bps) and SPI (1Mbps)

2,401MHz~2,482MHz/total 82ch

2,473~2,495MHz/frequency hopping

6mW +20/-80% (1mW when modulation speed is set to 2Mbps)

1.2mW/MHz~3.5mW/MHz, +20/-80%

0.01mW~10mW class (switchable)

Synthesizer method controlled by crystal oscillation

ARIB STD-T66 (66 modes), RCR STD-33 (33 modes)

1.27mm 12-pin header x 1 (If you purchase the wireless module separately, a pin header will be attached. Choose from DIP type or SMT type)

When transmitting: Approx. 38mA (25℃, 3.0V, 10mW, 2Mbps)

1.27mm pitch 12 pin connector

31×25×3.1 (length x width x height (mm), excluding protrusions)

GFSK

-94dBm or less @0.1%BER (250kbps)

-20℃~70℃

-30℃~+80℃ (no condensation)

2Mbps, 1Mbps, 250kbps

Built-in chip antenna specification or external antenna specification (External antennas are compatible with 8 types of omnidirectional antennas (waterproof type available), 3 types of stick-on patch antennas, 3 types of metal surface stick-on patch antennas, and 2 types of Yagi antennas)

2.4GHz low power wireless module TS2410-Part Number-TS2410-xx-S-mdm (patch antenna)

TS2410-xx-S-mdm (patch antenna)

Available upon quote

DC2.1V~3.6V

Approximately 2g

Asynchronous serial (19,200bps) and SPI (1Mbps)

2,401MHz~2,482MHz/total 82ch

2,473~2,495MHz/frequency hopping

6mW +20/-80% (1mW when modulation speed is set to 2Mbps)

1.2mW/MHz~3.5mW/MHz, +20/-80%

0.01mW~10mW class (switchable)

Synthesizer method controlled by crystal oscillation

ARIB STD-T66 (66 modes), RCR STD-33 (33 modes)

1.27mm 12-pin header x 1 (If you purchase the wireless module separately, a pin header will be attached. Choose from DIP type or SMT type)

When transmitting: Approx. 38mA (25℃, 3.0V, 10mW, 2Mbps)

1.27mm pitch 12 pin connector

31×25×3.1 (length x width x height (mm), excluding protrusions)

GFSK

-94dBm or less @0.1%BER (250kbps)

-20℃~70℃

-30℃~+80℃ (no condensation)

2Mbps, 1Mbps, 250kbps

Built-in chip antenna specification or external antenna specification (External antennas are compatible with 8 types of omnidirectional antennas (waterproof type available), 3 types of stick-on patch antennas, 3 types of metal surface stick-on patch antennas, and 2 types of Yagi antennas)

2.4GHz low power wireless module TS2410-Part Number-TS2410-xx-D-mdm (patch antenna)

TS2410-xx-D-mdm (patch antenna)

Available upon quote

DC2.1V~3.6V

Approximately 2g

Asynchronous serial (19,200bps) and SPI (1Mbps)

2,401MHz~2,482MHz/total 82ch

2,473~2,495MHz/frequency hopping

6mW +20/-80% (1mW when modulation speed is set to 2Mbps)

1.2mW/MHz~3.5mW/MHz, +20/-80%

0.01mW~10mW class (switchable)

Synthesizer method controlled by crystal oscillation

ARIB STD-T66 (66 modes), RCR STD-33 (33 modes)

1.27mm 12-pin header x 1 (If you purchase the wireless module separately, a pin header will be attached. Choose from DIP type or SMT type)

When transmitting: Approx. 38mA (25℃, 3.0V, 10mW, 2Mbps)

1.27mm pitch 12 pin connector

31×25×3.1 (length x width x height (mm), excluding protrusions)

GFSK

-94dBm or less @0.1%BER (250kbps)

-20℃~70℃

-30℃~+80℃ (no condensation)

2Mbps, 1Mbps, 250kbps

Built-in chip antenna specification or external antenna specification (External antennas are compatible with 8 types of omnidirectional antennas (waterproof type available), 3 types of stick-on patch antennas, 3 types of metal surface stick-on patch antennas, and 2 types of Yagi antennas)

2.4GHz low power wireless module TS2410-Part Number-TS2410-xx-S-mdm (Yagi antenna)

TS2410-xx-S-mdm (Yagi antenna)

Available upon quote

DC2.1V~3.6V

Approximately 2g

Asynchronous serial (19,200bps) and SPI (1Mbps)

2,401MHz~2,482MHz/total 82ch

2,473~2,495MHz/frequency hopping

6mW +20/-80% (1mW when modulation speed is set to 2Mbps)

1.2mW/MHz~3.5mW/MHz, +20/-80%

0.01mW~10mW class (switchable)

Synthesizer method controlled by crystal oscillation

ARIB STD-T66 (66 modes), RCR STD-33 (33 modes)

1.27mm 12-pin header x 1 (If you purchase the wireless module separately, a pin header will be attached. Choose from DIP type or SMT type)

When transmitting: Approx. 38mA (25℃, 3.0V, 10mW, 2Mbps)

1.27mm pitch 12 pin connector

31×25×3.1 (length x width x height (mm), excluding protrusions)

GFSK

-94dBm or less @0.1%BER (250kbps)

-20℃~70℃

-30℃~+80℃ (no condensation)

2Mbps, 1Mbps, 250kbps

Built-in chip antenna specification or external antenna specification (External antennas are compatible with 8 types of omnidirectional antennas (waterproof type available), 3 types of stick-on patch antennas, 3 types of metal surface stick-on patch antennas, and 2 types of Yagi antennas)

2.4GHz low power wireless module TS2410-Part Number-TS2410-xx-D-mdm (Yagi antenna)

TS2410-xx-D-mdm (Yagi antenna)

Available upon quote

DC2.1V~3.6V

Approximately 2g

Asynchronous serial (19,200bps) and SPI (1Mbps)

2,401MHz~2,482MHz/total 82ch

2,473~2,495MHz/frequency hopping

6mW +20/-80% (1mW when modulation speed is set to 2Mbps)

1.2mW/MHz~3.5mW/MHz, +20/-80%

0.01mW~10mW class (switchable)

Synthesizer method controlled by crystal oscillation

ARIB STD-T66 (66 modes), RCR STD-33 (33 modes)

1.27mm 12-pin header x 1 (If you purchase the wireless module separately, a pin header will be attached. Choose from DIP type or SMT type)

When transmitting: Approx. 38mA (25℃, 3.0V, 10mW, 2Mbps)

1.27mm pitch 12 pin connector

31×25×3.1 (length x width x height (mm), excluding protrusions)

GFSK

-94dBm or less @0.1%BER (250kbps)

-20℃~70℃

-30℃~+80℃ (no condensation)

2Mbps, 1Mbps, 250kbps

Built-in chip antenna specification or external antenna specification (External antennas are compatible with 8 types of omnidirectional antennas (waterproof type available), 3 types of stick-on patch antennas, 3 types of metal surface stick-on patch antennas, and 2 types of Yagi antennas)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Communication Antennas Products

Other products of Nomura Engineering Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Nomura Engineering Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

28.3hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree