All Categories

History

Super unit [double pump specification] SUT※※D6021-30-SUT00D6021‐30
Super unit [double pump specification] SUT※※D6021-30-SUT06D6021‐30
Super unit [double pump specification] SUT※※D6021-30-Nippon Mekuman Co., Ltd.

Super unit [double pump specification] SUT※※D6021-30
Nippon Mekuman Co., Ltd.

Nippon Mekuman Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

0.2hours

Very Fast Response


About This Product

■Features

・Energy saving: 50% energy saving rate achieved with high efficiency IPM motor that applies unique energy saving motor technology. ・Low noise: Achieves low noise of 60dB (A). Less than 73dB (A) in all driving areas. ・Not subject to high-efficiency electric motor regulations: Super units equipped with high-efficiency IPM motors are not subject to high-efficiency regulations. ・Reduction of oil temperature rise: As a result of energy saving through motor rotation speed control, temperature rise of hydraulic oil is suppressed. ・Reduction of control valves: Various controls are possible by setting parameters.

■Function

・Multi-stage pressure flow control: Cylinder can be controlled with 16 patterns of pressure (P) - flow rate (Q). ・Maintenance/management function (Hybrid-Win): By connecting a PC, you can obtain the super unit's internal data with simple operations. ・Communication function (optional for all models): Remote settings can be changed using RS232C serial communication. ・Analog input function (optional for single pump models): Pressure and speed can be controlled continuously as desired.

■Hard option

With unit cover, with controller cover, with DCL (DC reactor), power system/control system power separation, water level test tank, water leak test tank, level switch, temperature switch, thermometer, micro separator

  • Product

    Super unit [double pump specification] SUT※※D6021-30

Share this product


300+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

3 Models of Super unit [double pump specification] SUT※※D6021-30

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply voltage Motor/pump/unit part Motor capacity (kW equivalent) Waterproof protection grade Mass (kg) Installation location Vibration resistant motor pump Vibration resistant controller Standard paint color Rated current value (A) AC3~220V (60Hz) Rated current value (A) AC3~200V (60Hz) Rated current value (A) AC3~200V (50Hz) External output signal Contact output External output signal Digital output External input signal Storage ambient temperature Oil used Terms of use Other 2 Terms of use Other 1 Ambient humidity Ambient temperature Pump maximum working pressure (MPa) Pump maximum flow rate theoretical value (L/min) Pump operating flow rate adjustment range (L/min) Pump operating pressure adjustment range (MPa) No-fuse breaker capacity (A) Tank oil temperature Tank capacity (L) Type
Super unit [double pump specification] SUT※※D6021-30-Part Number-SUT00D6021‐30

SUT00D6021‐30

Available upon quote

3-phase 200V (50Hz), 200V (60Hz), 220V (60Hz) *Allowable power supply fluctuation range ±10%

5

IP44

58

Indoors (be sure to secure with bolts, etc.)

30.0m/s2, 33.3Hz, 3 directions, X, Y: 2Hr, Z: 4H

21.6m/s2, 33.3Hz, 3 directions, X, Y: 2Hr, Z: 4Hr

Ivory white (Munsell symbol 5Y7.5/1)

20.2

21.7

22.1

1 point, (1c contact), dry contact *Contact capacity: DC30V 0.5A (resistive load)

2 points, photocoupler isolation, FET output DC24V, 50mA or less/1ch

5ch, photocoupler isolation, DC24V (maximum DC27V) 5mA/1ch

-20~60℃

Petroleum-based general hydraulic oil (R&O) / wear-resistant hydraulic oil

・If you use the device to start/stop at intervals of 8 minutes or less, please use the control stop function of this device.
・Please be sure to ground the ground.

・Be sure to install an all-pole (3-pole) circuit breaker and earth leakage circuit breaker.
・Please wire the electrical connections to meet European standard EN60204-1.

85%RH or less (no condensation)

0~40℃

20.6

61.1 (61.1 when merging, 21.2 when solo)

Combined: 8.8~61.1, Single: 3.1~21.2

1.5~20.6

30

0~60℃ (Recommended operating temperature range: 15~50℃)

-

Motor pump type

Super unit [double pump specification] SUT※※D6021-30-Part Number-SUT06D6021‐30

SUT06D6021‐30

Available upon quote

3-phase 200V (50Hz), 200V (60Hz), 220V (60Hz) *Allowable power supply fluctuation range ±10%

5

IP44

99

Indoors (be sure to secure with bolts, etc.)

30.0m/s2, 33.3Hz, 3 directions, X, Y: 2Hr, Z: 4H

21.6m/s2, 33.3Hz, 3 directions, X, Y: 2Hr, Z: 4Hr

Ivory white (Munsell symbol 5Y7.5/1)

20.2

21.7

22.1

1 point, (1c contact), dry contact *Contact capacity: DC30V 0.5A (resistive load)

2 points, photocoupler isolation, FET output DC24V, 50mA or less/1ch

5ch, photocoupler isolation, DC24V (maximum DC27V) 5mA/1ch

-20~60℃

Petroleum-based general hydraulic oil (R&O) / wear-resistant hydraulic oil

・If you use the device to start/stop at intervals of 8 minutes or less, please use the control stop function of this device.
・Please be sure to ground the ground.

・Be sure to install an all-pole (3-pole) circuit breaker and earth leakage circuit breaker.
・Please wire the electrical connections to meet European standard EN60204-1.

85%RH or less (no condensation)

0~40℃

20.6

61.1 (61.1 when merging, 21.2 when solo)

Combined: 8.8~61.1, Single: 3.1~21.2

1.5~20.6

30

0~60℃ (Recommended operating temperature range: 15~50℃)

60

Unit type

Super unit [double pump specification] SUT※※D6021-30-Part Number-SUT10D6021‐30

SUT10D6021‐30

Available upon quote

3-phase 200V (50Hz), 200V (60Hz), 220V (60Hz) *Allowable power supply fluctuation range ±10%

5

IP44

112

Indoors (be sure to secure with bolts, etc.)

30.0m/s2, 33.3Hz, 3 directions, X, Y: 2Hr, Z: 4H

21.6m/s2, 33.3Hz, 3 directions, X, Y: 2Hr, Z: 4Hr

Ivory white (Munsell symbol 5Y7.5/1)

20.2

21.7

22.1

1 point, (1c contact), dry contact *Contact capacity: DC30V 0.5A (resistive load)

2 points, photocoupler isolation, FET output DC24V, 50mA or less/1ch

5ch, photocoupler isolation, DC24V (maximum DC27V) 5mA/1ch

-20~60℃

Petroleum-based general hydraulic oil (R&O) / wear-resistant hydraulic oil

・If you use the device to start/stop at intervals of 8 minutes or less, please use the control stop function of this device.
・Please be sure to ground the ground.

・Be sure to install an all-pole (3-pole) circuit breaker and earth leakage circuit breaker.
・Please wire the electrical connections to meet European standard EN60204-1.

85%RH or less (no condensation)

0~40℃

20.6

61.1 (61.1 when merging, 21.2 when solo)

Combined: 8.8~61.1, Single: 3.1~21.2

1.5~20.6

30

0~60℃ (Recommended operating temperature range: 15~50℃)

100

Unit type

Click on the part number for more information about each product

Other products of Nippon Mekuman Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Nippon Mekuman Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

0.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree