All Categories

History

  1. Metoree
  2. Large scale enterprise environmental monitoring system (Wise Co., Ltd.)
Large scale enterprise environmental monitoring system-E-16D
Large scale enterprise environmental monitoring system-Wise Co., Ltd.

Large scale enterprise environmental monitoring system
Wise Co., Ltd.

Wise Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

2.3hours

Very Fast Response

About This Product

■Features

・16 externally configurable sensors, 8 digital inputs, 4 output relays ・Configure smart alerts for different combinations of events ・User programmable IP camera snapshot ・Internal Linux ・Connect to an Ethernet network - Cascade up to 5 units (1 master, 4 slaves) via RS485 serial and/or Ethernet connections - Triggered events can send SSH commands to soft shutdown or reboot machines

■Temperature monitoring

The most common environmental threat in a server room or wiring closet is heat. Detect significant temperature rises or falls and receive notifications when heating problems occur.

■Humidity monitoring

Detect abnormal humidity conditions. Define the appropriate humidity level for each sensor's environment.

■Detect the presence of water

Whether it's a tripped sprinkler system or a flash flood, server rooms and wiring closets are the last places you want to check for water. Get notified as soon as water appears.

■Physical security monitoring

Monitor "dry contact" devices such as motion sensors, door sensors, vibration sensors, and smoke detectors.

■Control power

Remotely reboot and control power (on/off) to servers and network devices.

■Cascade input/output port

・Two RJ45 jacks. - Up to 5 systems can be used in a cascade configuration via RS485 to increase the number of sensor ports (1 master, 4 slaves). -Each slave unit requires a unique RS485 address value ranging from 1 to 255. - Uses CAT5/5e/6 patch cables with straight-wired RJ45 connectors -Up to 4,000 feet between master and slave units. -The last slave requires a termination plug (E-TRMPLG, not included) in the empty socket. - Use a single web interface for all connected systems.

■Built-in power sensor

・Main power voltage: 0 to 255 VAC ・Battery voltage: 0 to 20 VDC ・24VDC model voltage: 20~32VDC ・48VDC model voltage: 36~72VDC An alert will be sent when a power outage occurs and power is restored.

  • Product

    Large scale enterprise environmental monitoring system

Share this product


380+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

7 Models of Large scale enterprise environmental monitoring system

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power port Regulatory approval Auxiliary power supply Environment External dimensions WxDxH Internal humidity sensor Internal temperature sensor Guarantee Backup power supply Beacon port Digital output Digital input Siren port Ethernet port USB device port USB console port RS232 AUX port RS232 (DCS) port RJ45 sensor port MTBF Weight
Large scale enterprise environmental monitoring system-Part Number-E-16D

E-16D

Available upon quote

100 or 240 VAC, 50 or 60 Hz, via IEC connector (country-specific power cable included)
Power consumption: 35W
Earth connection
fuse protection
Optional 48VDC power supply, 24VDC power supply, dual power supply

CE, RoHS
TAA compliant

1 pair of screw terminals
Provides 12VDC, 150mA

Operating temperature: 32~104°F (0~40°C)
Storage temperature: -22~140°F (-30~60°C)
Relative humidity during operation/storage: 17~90%, non-condensing

Without rack mount kit included: 16.19 x 10.01 x 1.75 inches
Using included rack mount kit: 19 x 10.01 x 1.75 inches

Monitor the humidity inside the E-16D case. Use an external humidity sensor to monitor the humidity in the air.
20%~80% at temperature of 0~40℃
Accuracy within ±5% relative humidity

For temperature monitoring inside the E-16D case, use the outside air temperature sensor to monitor the surrounding air temperature.
0~40℃ application
Accuracy within ±0.75℃

Compliant with 2 year manufacturer warranty

Rechargeable sealed lead acid battery.
Battery removal/disposal instructions.
Provides 1 hour backup.

1 pair of screw terminals
Provides +12VDC, 180 mA to supply alarm beacon
fuse protection

4 screw terminal pairs
Relay switch contacts without potential
Normally open/normally closed connection points
Maximum switching load: 0.5 A at 100 VAC, 1 A at 30 VDC, 0.5 A at 48 VDC

8 screw terminal pairs for connecting dry contact devices
Input voltage: 0VDC~+25VDC
Provides +12VDC, 50mA on terminals 1-7, +12VDC, 350mA on terminal 8 only
fuse protection

1 pair of screw terminals
Supply siren at +12VDC, 180 mA
fuse protection

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector

4 female USB type A connectors
2 USB ports on front panel, 2 USB ports on back panel

1 USB type B connector (female)

1 RJ45 port for connecting a serial GSM modem or remote serial control device

One female RJ45 serial port for terminal access

16 RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass breakage, vibration, and motion sensors

89,884 hours

9.5 lbs (4.31 kg)

Large scale enterprise environmental monitoring system-Part Number-E-16DDP

E-16DDP

Available upon quote

100 or 240 VAC, 50 or 60 Hz, via IEC connector (country-specific power cable included)
Power consumption: 35W
Earth connection
fuse protection
Optional 48VDC power supply, 24VDC power supply, dual power supply

CE, RoHS
TAA compliant

1 pair of screw terminals
Provides 12VDC, 150mA

Operating temperature: 32~104°F (0~40°C)
Storage temperature: -22~140°F (-30~60°C)
Relative humidity during operation/storage: 17~90%, non-condensing

Without rack mount kit included: 16.19 x 10.01 x 1.75 inches
Using included rack mount kit: 19 x 10.01 x 1.75 inches

Monitor the humidity inside the E-16D case. Use an external humidity sensor to monitor the humidity in the air.
20%~80% at temperature of 0~40℃
Accuracy within ±5% relative humidity

For temperature monitoring inside the E-16D case, use the outside air temperature sensor to monitor the surrounding air temperature.
0~40℃ application
Accuracy within ±0.75℃

Compliant with 2 year manufacturer warranty

Rechargeable sealed lead acid battery.
Battery removal/disposal instructions.
Provides 1 hour backup.

1 pair of screw terminals
Provides +12VDC, 180 mA to supply alarm beacon
fuse protection

4 screw terminal pairs
Relay switch contacts without potential
Normally open/normally closed connection points
Maximum switching load: 0.5 A at 100 VAC, 1 A at 30 VDC, 0.5 A at 48 VDC

8 screw terminal pairs for connecting dry contact devices
Input voltage: 0VDC~+25VDC
Provides +12VDC, 50mA on terminals 1-7, +12VDC, 350mA on terminal 8 only
fuse protection

1 pair of screw terminals
Supply siren at +12VDC, 180 mA
fuse protection

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector

4 female USB type A connectors
2 USB ports on front panel, 2 USB ports on back panel

1 USB type B connector (female)

1 RJ45 port for connecting a serial GSM modem or remote serial control device

One female RJ45 serial port for terminal access

16 RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass breakage, vibration, and motion sensors

107,046 hours

-
Large scale enterprise environmental monitoring system-Part Number-E-16D-24V

E-16D-24V

Available upon quote

100 or 240 VAC, 50 or 60 Hz, via IEC connector (country-specific power cable included)
Power consumption: 35W
Earth connection
fuse protection
Optional 48VDC power supply, 24VDC power supply, dual power supply

CE, RoHS
TAA compliant

1 pair of screw terminals
Provides 12VDC, 150mA

Operating temperature: 32~104°F (0~40°C)
Storage temperature: -22~140°F (-30~60°C)
Relative humidity during operation/storage: 17~90%, non-condensing

Without rack mount kit included: 16.19 x 10.01 x 1.75 inches
Using included rack mount kit: 19 x 10.01 x 1.75 inches

Monitor the humidity inside the E-16D case. Use an external humidity sensor to monitor the humidity in the air.
20%~80% at temperature of 0~40℃
Accuracy within ±5% relative humidity

For temperature monitoring inside the E-16D case, use the outside air temperature sensor to monitor the surrounding air temperature.
0~40℃ application
Accuracy within ±0.75℃

Compliant with 2 year manufacturer warranty

Rechargeable sealed lead acid battery.
Battery removal/disposal instructions.
Provides 1 hour backup.

1 pair of screw terminals
Provides +12VDC, 180 mA to supply alarm beacon
fuse protection

4 screw terminal pairs
Relay switch contacts without potential
Normally open/normally closed connection points
Maximum switching load: 0.5 A at 100 VAC, 1 A at 30 VDC, 0.5 A at 48 VDC

8 screw terminal pairs for connecting dry contact devices
Input voltage: 0VDC~+25VDC
Provides +12VDC, 50mA on terminals 1-7, +12VDC, 350mA on terminal 8 only
fuse protection

1 pair of screw terminals
Supply siren at +12VDC, 180 mA
fuse protection

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector

4 female USB type A connectors
2 USB ports on front panel, 2 USB ports on back panel

1 USB type B connector (female)

1 RJ45 port for connecting a serial GSM modem or remote serial control device

One female RJ45 serial port for terminal access

16 RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass breakage, vibration, and motion sensors

115,143 hours

-
Large scale enterprise environmental monitoring system-Part Number-E-16D-24VDP

E-16D-24VDP

Available upon quote

100 or 240 VAC, 50 or 60 Hz, via IEC connector (country-specific power cable included)
Power consumption: 35W
Earth connection
fuse protection
Optional 48VDC power supply, 24VDC power supply, dual power supply

CE, RoHS
TAA compliant

1 pair of screw terminals
Provides 12VDC, 150mA

Operating temperature: 32~104°F (0~40°C)
Storage temperature: -22~140°F (-30~60°C)
Relative humidity during operation/storage: 17~90%, non-condensing

Without rack mount kit included: 16.19 x 10.01 x 1.75 inches
Using included rack mount kit: 19 x 10.01 x 1.75 inches

Monitor the humidity inside the E-16D case. Use an external humidity sensor to monitor the humidity in the air.
20%~80% at temperature of 0~40℃
Accuracy within ±5% relative humidity

For temperature monitoring inside the E-16D case, use the outside air temperature sensor to monitor the surrounding air temperature.
0~40℃ application
Accuracy within ±0.75℃

Compliant with 2 year manufacturer warranty

Rechargeable sealed lead acid battery.
Battery removal/disposal instructions.
Provides 1 hour backup.

1 pair of screw terminals
Provides +12VDC, 180 mA to supply alarm beacon
fuse protection

4 screw terminal pairs
Relay switch contacts without potential
Normally open/normally closed connection points
Maximum switching load: 0.5 A at 100 VAC, 1 A at 30 VDC, 0.5 A at 48 VDC

8 screw terminal pairs for connecting dry contact devices
Input voltage: 0VDC~+25VDC
Provides +12VDC, 50mA on terminals 1-7, +12VDC, 350mA on terminal 8 only
fuse protection

1 pair of screw terminals
Supply siren at +12VDC, 180 mA
fuse protection

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector

4 female USB type A connectors
2 USB ports on front panel, 2 USB ports on back panel

1 USB type B connector (female)

1 RJ45 port for connecting a serial GSM modem or remote serial control device

One female RJ45 serial port for terminal access

16 RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass breakage, vibration, and motion sensors

121,484 hours

-
Large scale enterprise environmental monitoring system-Part Number-E-16D-48V

E-16D-48V

Available upon quote

100 or 240 VAC, 50 or 60 Hz, via IEC connector (country-specific power cable included)
Power consumption: 35W
Earth connection
fuse protection
Optional 48VDC power supply, 24VDC power supply, dual power supply

CE, RoHS
TAA compliant

1 pair of screw terminals
Provides 12VDC, 150mA

Operating temperature: 32~104°F (0~40°C)
Storage temperature: -22~140°F (-30~60°C)
Relative humidity during operation/storage: 17~90%, non-condensing

Without rack mount kit included: 16.19 x 10.01 x 1.75 inches
Using included rack mount kit: 19 x 10.01 x 1.75 inches

Monitor the humidity inside the E-16D case. Use an external humidity sensor to monitor the humidity in the air.
20%~80% at temperature of 0~40℃
Accuracy within ±5% relative humidity

For temperature monitoring inside the E-16D case, use the outside air temperature sensor to monitor the surrounding air temperature.
0~40℃ application
Accuracy within ±0.75℃

Compliant with 2 year manufacturer warranty

Rechargeable sealed lead acid battery.
Battery removal/disposal instructions.
Provides 1 hour backup.

1 pair of screw terminals
Provides +12VDC, 180 mA to supply alarm beacon
fuse protection

4 screw terminal pairs
Relay switch contacts without potential
Normally open/normally closed connection points
Maximum switching load: 0.5 A at 100 VAC, 1 A at 30 VDC, 0.5 A at 48 VDC

8 screw terminal pairs for connecting dry contact devices
Input voltage: 0VDC~+25VDC
Provides +12VDC, 50mA on terminals 1-7, +12VDC, 350mA on terminal 8 only
fuse protection

1 pair of screw terminals
Supply siren at +12VDC, 180 mA
fuse protection

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector

4 female USB type A connectors
2 USB ports on front panel, 2 USB ports on back panel

1 USB type B connector (female)

1 RJ45 port for connecting a serial GSM modem or remote serial control device

One female RJ45 serial port for terminal access

16 RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass breakage, vibration, and motion sensors

115,143 hours

-
Large scale enterprise environmental monitoring system-Part Number-E-16D-48VDP

E-16D-48VDP

Available upon quote

100 or 240 VAC, 50 or 60 Hz, via IEC connector (country-specific power cable included)
Power consumption: 35W
Earth connection
fuse protection
Optional 48VDC power supply, 24VDC power supply, dual power supply

CE, RoHS
TAA compliant

1 pair of screw terminals
Provides 12VDC, 150mA

Operating temperature: 32~104°F (0~40°C)
Storage temperature: -22~140°F (-30~60°C)
Relative humidity during operation/storage: 17~90%, non-condensing

Without rack mount kit included: 16.19 x 10.01 x 1.75 inches
Using included rack mount kit: 19 x 10.01 x 1.75 inches

Monitor the humidity inside the E-16D case. Use an external humidity sensor to monitor the humidity in the air.
20%~80% at temperature of 0~40℃
Accuracy within ±5% relative humidity

For temperature monitoring inside the E-16D case, use the outside air temperature sensor to monitor the surrounding air temperature.
0~40℃ application
Accuracy within ±0.75℃

Compliant with 2 year manufacturer warranty

Rechargeable sealed lead acid battery.
Battery removal/disposal instructions.
Provides 1 hour backup.

1 pair of screw terminals
Provides +12VDC, 180 mA to supply alarm beacon
fuse protection

4 screw terminal pairs
Relay switch contacts without potential
Normally open/normally closed connection points
Maximum switching load: 0.5 A at 100 VAC, 1 A at 30 VDC, 0.5 A at 48 VDC

8 screw terminal pairs for connecting dry contact devices
Input voltage: 0VDC~+25VDC
Provides +12VDC, 50mA on terminals 1-7, +12VDC, 350mA on terminal 8 only
fuse protection

1 pair of screw terminals
Supply siren at +12VDC, 180 mA
fuse protection

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector

4 female USB type A connectors
2 USB ports on front panel, 2 USB ports on back panel

1 USB type B connector (female)

1 RJ45 port for connecting a serial GSM modem or remote serial control device

One female RJ45 serial port for terminal access

16 RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass breakage, vibration, and motion sensors

121,484 hours

9.6 lbs (4.36 kg)

Large scale enterprise environmental monitoring system-Part Number-E-16DEL

E-16DEL

Available upon quote

100 or 240 VAC, 50 or 60 Hz, via IEC connector (country-specific power cable included)
Power consumption: 35W
Earth connection
fuse protection
Optional 48VDC power supply, 24VDC power supply, dual power supply

CE, RoHS
TAA compliant

1 pair of screw terminals
Provides 12VDC, 150mA

Operating temperature: 32~104°F (0~40°C)
Storage temperature: -22~140°F (-30~60°C)
Relative humidity during operation/storage: 17~90%, non-condensing

Without rack mount kit included: 16.19 x 10.01 x 1.75 inches
Using included rack mount kit: 19 x 10.01 x 1.75 inches

Monitor the humidity inside the E-16D case. Use an external humidity sensor to monitor the humidity in the air.
20%~80% at temperature of 0~40℃
Accuracy within ±5% relative humidity

For temperature monitoring inside the E-16D case, use the outside air temperature sensor to monitor the surrounding air temperature.
0~40℃ application
Accuracy within ±0.75℃

Compliant with 2 year manufacturer warranty

Rechargeable sealed lead acid battery.
Battery removal/disposal instructions.
Provides 1 hour backup.

1 pair of screw terminals
Provides +12VDC, 180 mA to supply alarm beacon
fuse protection

4 screw terminal pairs
Relay switch contacts without potential
Normally open/normally closed connection points
Maximum switching load: 0.5 A at 100 VAC, 1 A at 30 VDC, 0.5 A at 48 VDC

8 screw terminal pairs for connecting dry contact devices
Input voltage: 0VDC~+25VDC
Provides +12VDC, 50mA on terminals 1-7, +12VDC, 350mA on terminal 8 only
fuse protection

1 pair of screw terminals
Supply siren at +12VDC, 180 mA
fuse protection

One 10/100 Base-T Ethernet port with RJ45 Ethernet connector

4 female USB type A connectors
2 USB ports on front panel, 2 USB ports on back panel

1 USB type B connector (female)

1 RJ45 port for connecting a serial GSM modem or remote serial control device

One female RJ45 serial port for terminal access

16 RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, liquid detection, smoke detection, glass breakage, vibration, and motion sensors

89,884 hours

-

Click on the part number for more information about each product

Other products of Wise Co., Ltd.

Reviews shown here are reviews of companies.

Small business environmental monitoring system-Wise Co., Ltd.

Small business environmental monitoring system

Wise Co., Ltd.

290+ people viewing

Response time: 2.32 hours

2 models listed

Micro environment monitoring system Android app-Wise Co., Ltd.

Micro environment monitoring system Android app

Wise Co., Ltd.

190+ people viewing

Last viewed: 14 hours ago

Response time: 2.32 hours

IOS app for low-cost environmental monitoring systems-Wise Co., Ltd.

IOS app for low-cost environmental monitoring systems

Wise Co., Ltd.

210+ people viewing

Response time: 2.32 hours

Management software for low-cost environmental monitoring systems-Wise Co., Ltd.

Management software for low-cost environmental monitoring systems

Wise Co., Ltd.

200+ people viewing

Last viewed: 2 hours ago

Response time: 2.32 hours

Micro Environmental Monitoring System/Remote Temperature/Humidity Sensor via IP-Wise Co., Ltd.

Micro Environmental Monitoring System/Remote Temperature/Humidity Sensor via IP

Wise Co., Ltd.

260+ people viewing

Last viewed: 6 hours ago

Response time: 2.32 hours

Remote Sensors

4 models listed

Supports up to 24 temperature sensors Low-cost environmental monitoring system-Wise Co., Ltd.

Supports up to 24 temperature sensors Low-cost environmental monitoring system

Wise Co., Ltd.

220+ people viewing

Last viewed: 10 hours ago

Response time: 2.32 hours

2 models listed

Enterprise environment monitoring system management software-Wise Co., Ltd.

Enterprise environment monitoring system management software

Wise Co., Ltd.

190+ people viewing

Response time: 2.32 hours

Medium-sized enterprise environmental monitoring system-Wise Co., Ltd.

Medium-sized enterprise environmental monitoring system

Wise Co., Ltd.

320+ people viewing

Response time: 2.32 hours

5 models listed

Console serial switch serial console server-Wise Co., Ltd.

Console serial switch serial console server

Wise Co., Ltd.

380+ people viewing

Last viewed: 4 hours ago

Response time: 2.32 hours

OPC Servers

8 models listed

Optical fiber network inspection equipment FIPT-400-MF-Automatic multi-fiber inspection solution-Wise Co., Ltd.

Optical fiber network inspection equipment FIPT-400-MF-Automatic multi-fiber inspection solution

Wise Co., Ltd.

150+ people viewing

Response time: 2.32 hours

Fiber Optic Network Inspection Equipment FTB-1V2/Pro - Single or Dual Carrier Platform-Wise Co., Ltd.

Fiber Optic Network Inspection Equipment FTB-1V2/Pro - Single or Dual Carrier Platform

Wise Co., Ltd.

300+ people viewing

Last viewed: 4 hours ago

Response time: 2.32 hours

Integration Platforms

2 models listed

Optical fiber network inspection equipment 4ch optical transceiver power meter (HOT PET)-Wise Co., Ltd.

Optical fiber network inspection equipment 4ch optical transceiver power meter (HOT PET)

Wise Co., Ltd.

220+ people viewing

Last viewed: 15 hours ago

Response time: 2.32 hours

Optical Power Meters

View more products of Wise Co., Ltd.

About Company Handling This Product

Wise Co., Ltd.

Response Rate

100.0%

Response Time

2.3hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree