Cross hole chamfering "X tool-X tool Hole diameter Φ4.0~4.5 Under neck length 40mm

Cross hole chamfering "X tool
Kreuz Co., Ltd.

About This Product

■SummaryX-TOOL is a tool that can complete chamfering and deburring of the entrance and exit of a drill hole, and the horizontal hole opening of a primary hole in one pass.

■Hole shapeIt is possible to chamfer not only the entrance and exit of a hole perpendicular to a flat plate, but also horizontal holes (*1,*2) drilled in the primary hole, holes drilled diagonally (*3), etc.
*1: Processing is possible from either the secondary side or the primary side.
*2: The diameter of the side hole to be chamfered from the primary side will be Φ0.5mm or more.
*3: The angle of inclination of the hole is up to approximately 10°.

■Standard products and custom-made productsX-TOOL comes in standard and custom-made types to accommodate various requests such as the size, position, and number of holes to be chamfered. For items that cannot be accommodated with standard products, we will consider custom-made products, so please contact us first.

■Chip replacementThe X-TOOL consists of four parts including the main body, and has a structure in which a spring constantly pushes out the chip. Tips can be replaced simply by removing the cap with a flathead screwdriver, making it easy, reliable, and quick.

■Chip shapeThe top of the tip, which comes into contact with the inner wall of the hole, has an R-shaped guide surface with no cutting edge, making it difficult to damage the inner diameter. The standard cutting edge angle is 90°, but this can be changed as an option. There are two types of inserts: the single-edged type is used for chamfering the entrance and exit of holes drilled in flat plates, and the double-edged type is used for chamfering horizontal holes drilled in primary holes.

■ Chamfering mechanismAlign the drill hole and the X-TOOL concentrically and insert while rotating in the normal direction. When the tip held down by the spring comes into contact with the entrance edge, it is pushed toward the center while chamfering, and the feed chamfering is completed until the tip enters the drill hole. The exit side is chamfered by pulling it out in the same way after the chip has been removed.

■Processing procedureThere are two types of X-TOOL tips: single-edged and double-edged, so the machining method differs depending on the tip used. This varies depending on the processing location.

*Other model numbers are available.

Model
There are 10 models for this product.

Product
Cross hole chamfering "X tool

Handling Company
Kreuz Co., Ltd.

Categories

Tools

Chamfering Cutters

600+ people viewing

Last viewed: 20 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Cross hole chamfering "X tool

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Neck length L1 (mm)	Hole diameter Φd (specified in 0.1mm increments)	Total length L (mm)	Tip length LT2 (mm)	Tip length LT1 (mm)	Chip angle α (deg)	Chip shape	Junk length L2 (mm)	Junk diameter ΦDs (mm)
X tool Hole diameter Φ4.0~4.5 Under neck length 40mm	Available upon quote	40	4.0~4.5	80	2.7	0.7	90	Single-edged/double-edged	40	6・8・10
X tool hole diameter Φ4.0~4.5 neck length 60mm	Available upon quote	60	4.0~4.5	100	2.7	0.7	90	Single-edged/double-edged	40	6・8・10
X tool hole diameter Φ4.6~4.9 neck length 40mm	Available upon quote	40	4.6~4.9	80	2.7	0.7	90	Single-edged/double-edged	40	6・8・10
X tool hole diameter Φ4.6~4.9 neck length 60mm	Available upon quote	60	4.6~4.9	100	2.7	0.7	90	Single-edged/double-edged	40	6・8・10
X tool hole diameter Φ4.6~4.9 neck length 80mm	Available upon quote	80	4.6~4.9	120	2.7	0.7	90	Single-edged/double-edged	40	6・8・10
X tool Hole diameter Φ5.0~5.4 Under neck length 40mm	Available upon quote	40	5.0~5.4	80	2.7	0.7	90	Single-edged/double-edged	40	6・8・10
X Tool Hole Diameter Φ5.0~5.4 Underneck Length 80mm	Available upon quote	80	5.0~5.4	120	2.7	0.7	90	Single-edged/double-edged	40	6・8・10
X tool Hole diameter Φ5.0~5.4 Under neck length 120mm	Available upon quote	120	5.0~5.4	160	2.7	0.7	90	Single-edged/double-edged	40	6・8・10
X tool hole diameter Φ5.5~5.9 neck length 50mm	Available upon quote	50	5.5~5.9	90	3.25	0.75	90	Single-edged/double-edged	40	6・8・10
X tool Hole diameter Φ5.5~5.9 Under neck length 100mm	Available upon quote	100	5.5~5.9	140	3.25	0.75	90	Single-edged/double-edged	40	6・8・10

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Chamfering tool

Tool System Co., Ltd.

250+ people viewing

Last viewed: 9 hours ago

Response time: 44.76 hours

Chamfering Cutters

8 models listed

Cross hole chamfering "NX holder

Kreuz Co., Ltd.

450+ people viewing

Last viewed: 17 hours ago

Chamfering Cutters

8 models listed

Handbornsberler SMA-30ber

Is tail

880+ people viewing

Last viewed: 23 hours ago

Response time: 6.27 hours

Chamfering Cutters

12 models listed

HSS with chamfer cutter hole

Omi Industries Co., Ltd.

$15.93

120+ people viewing

Response time: 30.02 hours

Chamfering Cutters

Co-HSS chamfer cutter

Omi Industries Co., Ltd.

$35.75

90+ people viewing

Response time: 30.02 hours

Chamfering Cutters

Carbide chamfer cutter (for non-ferrous metals)

Omi Industries Co., Ltd.

$46.80

80+ people viewing

Response time: 30.02 hours

Chamfering Cutters

Carbide chamfering cutter S (for iron)

Omi Industries Co., Ltd.

$52.65

90+ people viewing

Response time: 30.02 hours

Chamfering Cutters

CBN 3-blade chamfering cutter BMC-3

Kyowa Seiko Co., Ltd.

$180.05

50+ people viewing

Chamfering Cutters

2 models listed

Beveler SI-4012BL

Shinano Manufacturing Co., Ltd.

50+ people viewing

Chamfering Cutters

2 models listed

CBN back chamfer cutter double BUMW-4

Kyowa Seiko Co., Ltd.

$223.60

80+ people viewing

Last viewed: 15 hours ago

Chamfering Cutters

2 models listed

Beveler SI-4013A

Shinano Manufacturing Co., Ltd.

50+ people viewing

Chamfering Cutters

2 models listed

Row mounting shape MC surface cutter G2

Asahi Tool Manufacturing Co., Ltd.

$101.40

680+ people viewing

Last viewed: 1 hour ago

Chamfering Cutters

20 models listed

See More Chamfering Cutters Products

Other products of Kreuz Co., Ltd.

Reviews shown here are reviews of companies.

5-axis CNC control gate type deburring machine BARISTA

Kreuz Co., Ltd.

520+ people viewing

Last viewed: 1 hour ago

Deburring Machinery

5-axis CNC control gate type deburring machine BARISTA tool spindle unit

Kreuz Co., Ltd.

1050+ people viewing

Last viewed: 20 hours ago

Deburring Machinery

6 models listed

5-axis CNC control gate type deburring machine BARISTA Accessories/Options

Kreuz Co., Ltd.

310+ people viewing

Last viewed: 20 hours ago

6 models listed

Original 5-axis robot Roborooter

Kreuz Co., Ltd.

460+ people viewing

Last viewed: 20 hours ago

Deburring Machinery

2 models listed

Gear/end face deburring "N Bite

Kreuz Co., Ltd.

680+ people viewing

Last viewed: 20 hours ago

Deburring Machinery

10 models listed

Cross hole chamfering "NX holder

Kreuz Co., Ltd.

450+ people viewing

Last viewed: 17 hours ago

Chamfering Cutters

8 models listed

Deburring holder for machine tools "FF holder

Kreuz Co., Ltd.

560+ people viewing

Last viewed: 20 hours ago

10 models listed

Ejector pin trace deburring "EP cutter

Kreuz Co., Ltd.

310+ people viewing

Last viewed: 20 hours ago

Deburring Machinery

2 models listed

Ejector pin trace deburring "EP cutter" special holder

Kreuz Co., Ltd.

300+ people viewing

Last viewed: 20 hours ago

2 models listed

Resin-bonded brush for deburring "JF Brush

Kreuz Co., Ltd.

650+ people viewing

Last viewed: 11 minutes ago

Deburring Tools

4 models listed

Floating unit + electric spindle motor GR-N

Kreuz Co., Ltd.

260+ people viewing

Last viewed: 5 hours ago

Spindle Motors

2 models listed

Floating unit + electric spindle motor KDM-7+FL-P

Kreuz Co., Ltd.

230+ people viewing

Last viewed: 5 hours ago

Spindle Motors

2 models listed

View more products of Kreuz Co., Ltd.

About Company Handling This Product

Kreuz Co., Ltd.

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Cross hole chamfering "X tool Kreuz Co., Ltd.

About This Product

■Summary

■Hole shape

■Standard products and custom-made products

■Chip replacement

■Chip shape

■ Chamfering mechanism

■Processing procedure

10 Models of Cross hole chamfering "X tool

Customers who viewed this product also viewed

Other products of Kreuz Co., Ltd.

About Company Handling This Product

Related search keywords

Cross hole chamfering "X tool
Kreuz Co., Ltd.