Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4B type-5ES11-4B004

Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4B type
SGL Carbon Technique Japan Co., Ltd.

About This Product

■SummaryWe use Tokabait, a structural material for chemical equipment that is made by impregnating graphite material with excellent corrosion resistance and heat transfer properties with a thermosetting resin developed by our company and curing it to provide sufficient airtightness and increase strength. I'm doing it. Therefore, it is highly versatile and economical, and is used by many users.

It has a structure in which a bunch of heat transfer tubes are housed in a steel can body. Normally, corrosive fluid is exchanged with steam or cooling water inside the heat transfer tubes through the outside of the heat transfer tubes. Corrosive fluids can be passed outside the pipe by using various types of lightning.

Even in large equipment, tube plates and liquid chambers are machined from monoblocks, so there is no adhesive surface for bonding. Although it is one of our largest class heat exchangers (shell diameter 70 inches), the tube plate and liquid chamber (maximum outer diameter φ1940 mm) are monoblock. For fluids containing slurry, there are also structures that take measures against erosion on the tube plate surface.

■Standard dimensions of heat transfer tubesThere are three types of heat transfer tubes used in the standard type: inner diameters of 22 mm, 25 mm, and 38 mm, effective lengths of 2,000 mm, 3,000 mm, and 4,000 mm, and the number of flow paths is determined according to the flow rate of the fluid. The effective length of the heat exchanger tube can be set arbitrarily from 1,000 to 6,000 mm (if it exceeds 4,000 mm, it will need to be joined).

The smaller the heat transfer tube diameter, the smaller the heat transfer tube pitch dimension can be set, and the number of tubes within the shell diameter can be increased, making it possible to increase the heat transfer area with the same shell diameter ratio. In the case of slurry or gel-like fluids, clogging can be prevented by increasing the inner diameter of the heat transfer tube.

■Advantages compared to shell block heat exchangers・Easy to replace gaskets due to the small number of gaskets on the process side
- If a leak occurs, the leaking tube can be easily identified and inspected on-site (in the case of shell block type, inspection of each block is required)
・Easy to repair leaks by replacing the leaking tube or punching a plug (for shell block type, block replacement is required)

■Special specificationsPre-tensioned carbon fiber wrapped around graphite tube for improved resistance to temperature and pressure shocks
・Improved mechanical strength
・30-40% improvement in burst pressure
・Leak prevention function for differential pressure of 0.2 to 0.5 MPa
・Crushing prevention

*Other model numbers are available

Model
There are 10 models available for this product.

Product
Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4B type

Handling Company
SGL Carbon Technique Japan Co., Ltd.

Categories

Temperature Control

Multitubular Heat Exchangers

120+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4B type

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Jama board material	Liquid chamber material	Installation direction	Compatible laws and regulations	Based on outer diameter Heat transfer area (m2)	Outer diameter x inner diameter dimensions (mm)	Inner diameter reference heat transfer area (m2)	Shell material
5ES11-4B004	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	1.43	Φ38×φ25	0.94	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
6ES11-4B007	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	2.5	Φ38×φ25	1.64	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
8ES11-4B008	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	2.86	Φ38×φ25	1.88	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
10ES11-4B014	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	5.01	Φ38×φ25	3.29	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
12ES11-4B022	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	7.87	Φ38×φ25	5.18	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
14ES11-4B031	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	11.1	Φ38×φ25	7.3	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
16ES11-4B044	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	15.7	Φ38×φ25	10.3	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
18ES11-4B056	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	20	Φ38×φ25	13.1	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
20ES11-4B074	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	26.5	Φ38×φ25	17.4	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.
22ES11-4B092	Available upon quote	Carbon steel, stainless steel, talkabait, PVC, etc.	Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.	Horizontal, vertical, tilted	First class pressure vessels, second class pressure vessels, small pressure vessels, etc.	32.9	Φ38×φ25	21.6	Carbon steel, stainless steel, various rubber linings, PTFE lining, Zr lining, FRP, etc.

Image

Part Number

Price (excluding tax)

Jama board material

Liquid chamber material

Installation direction

Compatible laws and regulations

Based on outer diameter Heat transfer area (m2)

Outer diameter x inner diameter dimensions (mm)

Inner diameter reference heat transfer area (m2)

Shell material

5ES11-4B004

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

1.43

Φ38×φ25

0.94

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

6ES11-4B007

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

2.5

Φ38×φ25

1.64

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

8ES11-4B008

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

2.86

Φ38×φ25

1.88

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

10ES11-4B014

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

5.01

Φ38×φ25

3.29

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

12ES11-4B022

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

7.87

Φ38×φ25

5.18

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

14ES11-4B031

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

11.1

Φ38×φ25

7.3

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

16ES11-4B044

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

15.7

Φ38×φ25

10.3

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

18ES11-4B056

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

Φ38×φ25

13.1

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

20ES11-4B074

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

26.5

Φ38×φ25

17.4

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

22ES11-4B092

Available upon quote

Carbon steel, stainless steel, talkabait, PVC, etc.

Talker bait, various rubber linings, PTFE linings, Zr linings, FRP, etc.

Horizontal, vertical, tilted

First class pressure vessels, second class pressure vessels, small pressure vessels, etc.

32.9

Φ38×φ25

21.6

Carbon steel, stainless steel, various rubber linings, PTFE lining,
Zr lining, FRP, etc.

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Finchbu -type heat exchanger drying, heating, preheating, heating series

Matsuzawa Works Co., Ltd.

310+ people viewing

Last viewed: 13 hours ago

Response time: 19.25 hours

Multitubular Heat Exchangers

12 models listed

Shell & tube heat exchanger cold water / refrigerant series

Matsuzawa Works Co., Ltd.

220+ people viewing

Last viewed: 21 hours ago

Response time: 19.25 hours

Multitubular Heat Exchangers

2 models listed

Piping equipment High efficiency/energy saving heat exchanger

Yoshiro Kiko Co., Ltd.

430+ people viewing

Response time: 97.99 hours

Multitubular Heat Exchangers

3 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ22 Standard model A type

SGL Carbon Technique Japan Co., Ltd.

170+ people viewing

Last viewed: 22 hours ago

Response time: 76.11 hours

Multitubular Heat Exchangers

20 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ22 Standard model B type

SGL Carbon Technique Japan Co., Ltd.

100+ people viewing

Last viewed: 1 minute ago

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Piping Equipment Silicon Carbide (SIC) Heat Exchanger

Yoshiro Kiko Co., Ltd.

330+ people viewing

Last viewed: 1 hour ago

Response time: 97.99 hours

Multitubular Heat Exchangers

2 models listed

Examples of uses for titanium heat exchangers: Set heat exchanger that uses corrugated pipes with thermal efficiency more than twice that of straight pipe types, including heating, cooling, and latent heat recovery.

TIG Co., Ltd.

520+ people viewing

Last viewed: 1 hour ago

Multitubular Heat Exchangers

4 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ22 Standard model D type

SGL Carbon Technique Japan Co., Ltd.

100+ people viewing

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4A type

SGL Carbon Technique Japan Co., Ltd.

120+ people viewing

Last viewed: 1 second ago

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Double tube heat exchanger and pressure vessel receiver

Meiwa Co., Ltd.

4.0

220+ people viewing

Response time: 43.68 hours

Multitubular Heat Exchangers

18 models listed

Double pipe heat exchanger spiral hose SH series

TIG Co., Ltd.

450+ people viewing

Multitubular Heat Exchangers

5 models listed

Heat replacement shell & tube heat exchanger between fluids and fluids flowing outside the tube

Frontier technology Co., Ltd.

600+ people viewing

Last viewed: 3 hours ago

Response time: 143.56 hours

Multitubular Heat Exchangers

2 models listed

See More Multitubular Heat Exchangers Products

Other products of SGL Carbon Technique Japan Co., Ltd.

Reviews shown here are reviews of companies.

Multi-tube heat exchanger Heat exchanger tube diameter φ22 Standard model A type

SGL Carbon Technique Japan Co., Ltd.

170+ people viewing

Last viewed: 22 hours ago

Response time: 76.11 hours

Heat Exchangers

20 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ22 Standard model B type

SGL Carbon Technique Japan Co., Ltd.

100+ people viewing

Last viewed: 1 minute ago

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ22 Standard model D type

SGL Carbon Technique Japan Co., Ltd.

100+ people viewing

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4A type

SGL Carbon Technique Japan Co., Ltd.

120+ people viewing

Last viewed: 1 second ago

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4D type

SGL Carbon Technique Japan Co., Ltd.

110+ people viewing

Last viewed: 11 hours ago

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ38 standard model 5A type

SGL Carbon Technique Japan Co., Ltd.

110+ people viewing

Last viewed: 21 hours ago

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ38 Standard model 5B type

SGL Carbon Technique Japan Co., Ltd.

110+ people viewing

Last viewed: 4 hours ago

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

Multi-tube heat exchanger Heat exchanger tube diameter φ38 standard model 5D type

SGL Carbon Technique Japan Co., Ltd.

120+ people viewing

Response time: 76.11 hours

Multitubular Heat Exchangers

10 models listed

EC type (cubic type) heat exchanger

SGL Carbon Technique Japan Co., Ltd.

270+ people viewing

Last viewed: 1 hour ago

Response time: 76.11 hours

Heat Exchangers

30 models listed

Packed tower

SGL Carbon Technique Japan Co., Ltd.

280+ people viewing

Last viewed: 19 hours ago

Response time: 76.11 hours

POLYFLURON PTFE lined columns/vessels and internals

SGL Carbon Technique Japan Co., Ltd.

300+ people viewing

Last viewed: 2 hours ago

Response time: 76.11 hours

Spray tower

SGL Carbon Technique Japan Co., Ltd.

320+ people viewing

Response time: 76.11 hours

View more products of SGL Carbon Technique Japan Co., Ltd.

About Company Handling This Product

SGL Carbon Technique Japan Co., Ltd.

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4B type SGL Carbon Technique Japan Co., Ltd.

About This Product

■Summary

■Standard dimensions of heat transfer tubes

■Advantages compared to shell block heat exchangers

■Special specifications

10 Models of Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4B type

Customers who viewed this product also viewed

Other products of SGL Carbon Technique Japan Co., Ltd.

About Company Handling This Product

Related search keywords

Multi-tube heat exchanger Heat exchanger tube diameter φ25 Standard model 4B type
SGL Carbon Technique Japan Co., Ltd.