All Categories

History

Water quality comprehensive monitoring device Yu-ODS7
Water quality comprehensive monitoring device Yu-ODS5
Water quality comprehensive monitoring device Yu-Shoei Co., Ltd.

Water quality comprehensive monitoring device Yu
Shoei Co., Ltd.

Shoei Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

35.6hours


About This Product

■ Simultaneous measurement of 7 water quality items

A comprehensive monitoring device that can measure up to 7 water quality items simultaneously. [Measurement items] Turbidity/chromaticity/free residual chlorine/electrical conductivity/pH/water temperature/water pressure

■Diagnostic function

Equipped with highly accurate sensing and mutual monitoring functions for measuring turbidity, color, and residual chlorine, increasing reliability and stability. The measurement sensor is equipped with a 2-circuit sensor to improve measurement stability, and measurements are performed on both sides. This enables immediate detection of sensing response deterioration due to sensor failure based on measurement differences between sensors, and an alarm is issued before control is affected.

■Self-diagnosis function

In order to monitor the reactivity and deterioration of the sensor, as a validation function, we regularly check the high and low sensitivity reactions of each sensor every day, grasp the deterioration tendency specific to the sensor, and replace the sensor at the optimal time. Masu. This prevents troubles such as damage to the sensor.

■Remote alarm monitoring system (optional)

With a maintenance contract provided by the manufacturer, it is possible to maintain optimal and clean water quality by ensuring that the equipment is always in the best condition, preventing measurement errors and loss of control. In addition, a chlorine residual amount sensor replenishes chlorine at the optimal timing when necessary, preventing water quality deterioration due to a lack of active chlorine ingredients, and a remote monitoring system combined with full maintenance allows for quick response in the event of an abnormality. becomes possible. This allows for accurate sterilization measures to be taken between the occurrence of a problem and the proliferation of Legionella bacteria, thereby reliably preventing infection accidents.

■Summary

This is a comprehensive water quality monitoring device intended for use in water taps at the end of waterworks, water receiving tanks in buildings, and drinking water filtration equipment. Equipped with highly accurate sensing and mutual diagnosis functions, it can measure 7 items simultaneously as a comprehensive monitoring device. Furthermore, by combining the self-diagnosis function with our remote monitoring and full maintenance, we can achieve complete maintenance-free facility maintenance.

■Applications

・Water quality monitoring measurement at the end of water supply pipes ・Water quality monitoring and measurement after well water is treated to make it suitable for drinking

  • Product

    Water quality comprehensive monitoring device Yu

Share this product


310+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

3 Models of Water quality comprehensive monitoring device Yu

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply voltage Piping connection Piping connection for wiring power supply Piping connection Sample water outlet piping connection Piping connection Sample water inlet piping connection Piping connection for input/output Free residual chlorine Communication interface Sample water conditions Temperature Sample water conditions Pressure Sample water conditions Analyzer inflow rate Display method Chromaticity Automatic cleaning Turbidity Power consumption Calibration method How to start calibration Calibration method Calibration time Calibration method Calibration cycle Body weight Body dimensions (mm) W Body dimensions (mm) L Body dimensions (mm) H Body paint color Body specifications Data memory Water temperature Water pressure Electrical conductivity Analog output PH
Water quality comprehensive monitoring device Yu-Part Number-ODS7

ODS7

Available upon quote

AC100V

Φ4.5~6.0

Rc1/2

Rc1/2

Φ12.5~14.0 *The hole diameter corresponds to the installation environment.

RS,485 ModbusASCII 19,600bps

0.0~40.0℃

0.100~0.750MPa

500~1,000mL/min

TFT5.0inch color touch panel display

During calibration, flushing with zero reference water [turbidity, chromaticity, residual chlorine, pH, electrical conductivity], ultrasonic vibration cleaning [turbidity, chromaticity], bead rotation cleaning, electrolytic polishing [residual chlorine]

200VA/200W

Scheduled calibration start using timer, arbitrary calibration using touch panel

15 minutes

8 steps from 0 to 23:00

Approximately 120kg

550

620

1,550

N9.5

Outdoor compatible

SD card Measured instantaneous values ​​can be written periodically as CSV data, writing interval: every 1 to 59 minutes or every hour (1 minute data can be saved for 3 months, 1 hour data can be saved for 1 year)

4-20mA (each 7 items individually)

Water quality comprehensive monitoring device Yu-Part Number-ODS5

ODS5

Available upon quote

AC100V

Φ4.5~6.0

Rc1/2

Rc1/2

Φ12.5~14.0 *The hole diameter corresponds to the installation environment.

RS,485 ModbusASCII 19,600bps

0.0~40.0℃

0.100~0.750MPa

500~1,000mL/min

LED3.8inch monochrome touch panel display

During calibration, flushing with zero reference water [turbidity, chromaticity, residual chlorine, pH, electrical conductivity], ultrasonic vibration cleaning [turbidity, chromaticity], bead rotation cleaning, electrolytic polishing [residual chlorine]

200VA/200W

Scheduled calibration start using timer, arbitrary calibration using touch panel

15 minutes

8 steps from 0 to 23:00

Approximately 60kg

272

505

1,330

5Y7/1

Outdoor compatible, wall-mountable

SD card Measured instantaneous values ​​can be written periodically as CSV data, writing interval: every 1 to 59 minutes or every hour (1 minute data can be saved for 3 months, 1 hour data can be saved for 1 year)

- - -
Water quality comprehensive monitoring device Yu-Part Number-ODS3

ODS3

Available upon quote

AC100V

Φ4.5~6.0

Rc1/2

Rc1/2

Φ12.5~14.0 *The hole diameter corresponds to the installation environment.

RS,485 ModbusASCII 19,600bps

0.0~40.0℃

0.100~0.750MPa

500~1,000mL/min

LED3.8inch monochrome touch panel display

During calibration, flushing with zero reference water [turbidity, chromaticity, residual chlorine, pH, electrical conductivity], ultrasonic vibration cleaning [turbidity, chromaticity], bead rotation cleaning, electrolytic polishing [residual chlorine]

200VA/200W

Scheduled calibration start using timer, arbitrary calibration using touch panel

15 minutes

8 steps from 0 to 23:00

Approximately 60kg

272

505

1,330

5Y7/1

Outdoor compatible, wall-mountable

SD card Measured instantaneous values ​​can be written periodically as CSV data, writing interval: every 1 to 59 minutes or every hour (1 minute data can be saved for 3 months, 1 hour data can be saved for 1 year)

- - - - -

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Water Testers Products

Other products of Shoei Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Shoei Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

35.6hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree