All Categories

History

Digital indicator TD-91B / TD-91BB-TD-91B
Digital indicator TD-91B / TD-91BB-TD-91BB
Digital indicator TD-91B / TD-91BB-Tokyo Measuring Instruments Laboratory Co., Ltd.

Tokyo Measuring Instruments Laboratory Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

12.9hours

Relatively Fast Response


About This Product

This is a digital indicator for instrumentation that measures load, displacement, pressure, etc. using a strain gauge type transducer. Equipped with an LED display with a character height of approximately 20 mm and a jog dial, the indicator has excellent operability. Input range and physical quantity display can be easily set by equivalent input calibration and actual load calibration. It also compares the upper and lower limit values ​​with the measured value and outputs the results as an open collector signal.

■Features

・Small and lightweight ・Equipped with analog peak hold function and upper and lower limit setting function ・Wide balance adjustment range ・Easy to operate with jog dial ・Direct reading and display of physical quantities is possible with equivalent input calibration. ・Easy-to-read monitor with wide viewing angle ・With voltage and current output

  • Product

    Digital indicator TD-91B / TD-91BB

Share this product


220+ people viewing

Last viewed: 12 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Digital indicator TD-91B / TD-91BB

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply Mass Display value Display decimal point Display Hold function Display digital filter Display Measuring part Applicable sensor range Measurement part accuracy Measuring part Measuring range Measuring part Calibration value Measuring part stability Measuring unit Bridge power supply Measuring section Zero adjustment range Measurement part Sampling speed Number of measurement points Measurement target Comparison output section Comparison judgment value range Comparison output section Output circuit Comparison output section Photocoupler output capacity External dimensions Operating temperature and humidity range Reset control time Warm up time Analog output section response speed Analog output section SN ratio Analog peak hold accuracy Analog peak hold response speed Analog peak hold droop speed Comparison function (external output)
Digital indicator TD-91B / TD-91BB-Part Number-TD-91B

TD-91B

Available upon quote

AC90~240V (50/60Hz) 13VA MAX

Approximately 450g

-9,999~+9,999 (4 digits)

Arbitrary settings possible

・Peak hold
・Valley hold
・Peak volley hold
・Start hold
・Analog peak hold
・Analog/digital peak hold

400, 800, 1,000, 2,000, 5,000 times moving average

Red/green 7 segment LED (character height: approx. 20mm)

120Ω, 350Ω, 350Ω sensor 4

SPAN/SPIN×0.1%+1digit, ±3digit when strain is directly read

-3mV/V~3mV/V, maximum display ±9,999

0.5mV/V, 1.5mV/V, 2.0mV/V

0.4×10^−6 strain/℃ in terms of input

DC5V±5%, 60mA

-3mV/V~3mV/V, maximum display ±9,999

Approximately 2.5 times/second

1 point

Strain gauge type transducer (120Ω, 350Ω, 4 350Ω sensors)

-9,999~+9,999

Open collector output using photo coupler

DC30V, 20m

48 (H) × 96 (W) × 99.5 (D) mm

-10~+50℃, 35~85%RH or less (excluding condensation)

800ms or more

Half an hour

Approximately 0.5 seconds

26dB or more (50mVp-p)

±0.5%FS

Minimum input width 2ms

0.025%FS/s (1.5×10^−6 strain/s)

Upper limit value setting (HI), lower limit value or lower limit value (GO), lower limit value setting (LO)

Digital indicator TD-91B / TD-91BB-Part Number-TD-91BB

TD-91BB

Available upon quote

AC90~240V (50/60Hz) 13VA MAX

Approximately 1.6kg

-9,999~+9,999 (4 digits)

Arbitrary settings possible

・Peak hold
・Valley hold
・Peak volley hold
・Start hold
・Analog peak hold
・Analog/digital peak hold

400, 800, 1,000, 2,000, 5,000 times moving average

Red/green 7 segment LED (character height: approx. 20mm)

120Ω, 350Ω, 350Ω sensor 4

SPAN/SPIN×0.1%+1digit, ±3digit when strain is directly read

-3mV/V~3mV/V, maximum display ±9,999

0.5mV/V, 1.5mV/V, 2.0mV/V

0.4×10^−6 strain/℃ in terms of input

DC5V±5%, 60mA

-3mV/V~3mV/V, maximum display ±9,999

Approximately 2.5 times/second

1 point

Strain gauge type transducer (120Ω, 350Ω, 4 350Ω sensors)

-9,999~+9,999

Open collector output using photo coupler

DC30V, 20m

81 (H) ×170.5 (W) ×120 (D) mm

-10~+50℃, 35~85%RH or less (excluding condensation)

800ms or more

Half an hour

Approximately 0.5 seconds

26dB or more (50mVp-p)

±0.5%FS

Minimum input width 2ms

0.025%FS/s (1.5×10^−6 strain/s)

-

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Electronic Multimeters Products

Other products of Tokyo Measuring Instruments Laboratory Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Tokyo Measuring Instruments Laboratory Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

12.9hrs


Company Review

5.0

Company Overview

Established in 1954, Tokyo Measuring Instruments Laboratory Co., Ltd. (Tokyo Sokki Kenkyujo Co., Ltd.) is a ma...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree