Speed sensor ST5484E
BATROSS Co., Ltd.
About This Product
The 5484E is a self-supplied speed converter that includes a piezoelectric accelerometer, signal integration, RMS peak detection, and DC4~20mA signal conditioning in a single package. It is possible to connect directly to the equipment case or bearing housing without going through a signal conditioning device.
The amplitude of the integrated accelerometer (velocity) signal is converted to a DC4~20mA signal for industrial processes such as PLC, DCS, and SCADA, which is a simplified means of vibration monitoring. If you select the lead wire type or pin terminal type, a housing is not required and it can be connected directly to the conduit. To reduce installation costs, it can be used together with an intrinsically safe safety barrier, or directly connected to an explosion-proof piping conversion joint to increase explosion protection and safety.
Features
■RFI/EMI
Reinforced circuit design and installation technology eliminates radio noise generated from radios, etc.
■Excellent moisture resistance
The 2-pin MIL connector type is sealed and complies with the IP67 waterproof standard. The lead wire type and terminal block type with the optional IEC conduit elbow comply with the IP66 waterproof standard.
■Explosion-proof certification
Certified in America (CSA), Brazil (INMETRO), and Europe (ATEX&IEC).
■Dynamic signal processing
The 2-wire type outputs a DC4~20mA vibration signal that is easy to connect to PLC, DCS, and other plant control systems. In addition, the optional 4-wire type can also directly output acceleration signals (100mV/G) for vibration data collection and analysis.
■Conduit
The terminal block type and lead wire type have a threaded hole on the top of the sensor for conduit connection.
■Vibration band filter option
For ST5484E, it is possible to select and order various bandpass filters. Filter options allow for more accurate measurements.
■Polar independent wiring
Patented "IPT®" technology allows connection to loop circuits without worrying about voltage polarity. This reduces wiring errors and eliminates phase reversal of the acceleration output.
■RMS amplitude detection
RMS measurement of vibration amplitude is possible. Optionally, true RMS values and extended RMS values for derived peaks are also supported.
■Full scale range
It is also compatible with ranges not listed in the model composition table. Please inquire about full scale range when ordering.
-
Product
Speed sensor ST5484E
-
Handling Company
BATROSS Co., Ltd.
-
Categories
1 Models of Speed sensor ST5484E
| Product Image | Part Number | Price (excluding tax) | Certification CE mark | Certification explosion proof | Environment Connection type | Environment Housing material | Environment Moisture resistance (without condensation) | Environment Operating temperature | Environment Waterproof standard | Environment axial direction | Environment sensitive axis | Environment weight | Input circuit insulation | Input power supply (standard DC24V) | Output DC4~20mA | Output Dynamic signal output impedance | Output Maximum loop circuit resistance | Output Recommended minimum load impedance | Output dynamic signal | Recommended safety barrier Active Zener type | Recommended safety barrier Active galvanic type | Recommended safety barrier Passive Zener type | Signal processing Amplitude detection | Signal processing Frequency support | Signal processing Full scale unit | Signal processing High-pass attenuation slope | Signal processing Low-pass attenuation slope | Signal processing Maximum full scale | Signal processing Minimum full scale | Signal processing accuracy | Signal processing high pass filter | Signal processing low pass filter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ST5484E-AAA-BBCD-EF |
Available upon quote | Can be | CSA, ATEX, IECEx, INMETRO, KOSHA, EAC, NEPSI | Lead wire type (2 wires/4 wires), MIL-C5015 (2 wires only), terminal block (2 wires/4 wires) | SUS303 (standard), SUS316 (optional) | ・95% (Lead wire, terminal block), ・100% (MIL type) | -40~+100℃ | ・MIL type connector (D=4) NEMA4X・IP67, ・Lead wire, terminal block (other than D=4) IP66: When using explosion-proof elbow (``8200-XXX-IEC''), None: Other than explosion-proof elbow | Any | Same direction as the mounting axis | 360g | 500Vrms | DC11~29.6V (intrinsically safe), DC11~30.0V (explosion-proof/non-flammable) | Proportional to speed (4mA=0 vibration, 20mA=full scale value) | 10kΩ | RL=50x (VS-11) Ω, VS: Supply power | 500kΩ | 100mV/G (acceleration) | MTL7706" or equivalent | MTL5541" or equivalent | MTL7787" or equivalent | True RMS value (true RMS value or extended RMS value when ordering) | 2Hz~1,500Hz (standard), 2Hz~2,000Hz (optional) | Ips, mm/sec | 12dB/octave | 12dB/octave | 5.0ips (Please contact us for more) | 0.5ips (Please contact us if it is less than that) | ±2.5% (pass band), ±4% (attenuation band) | 5, 10, 20, 50, 100, 200Hz (*Please specify when ordering) | 230, 250, 350, 450, 500, 1,000Hz (*Please specify when ordering) |
Customers who viewed this product also viewed
Other products of BATROSS Co., Ltd.
View more products of BATROSS Co., Ltd.
About Company Handling This Product
- Japan