All Categories

History

High performance general purpose weighing indicator AD-4410-AD-4410
High performance general purpose weighing indicator AD-4410-A and Day Co., Ltd.

High performance general purpose weighing indicator AD-4410
A and Day Co., Ltd.

A and Day Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

21.1hours

Relatively Fast Response


About This Product

The AD-4410 is equipped with a high-performance digital filter, achieving both high precision and high-speed response in environments with a lot of vibration, which has been difficult until now.

■Features

・It has the potential to inexpensively improve the performance of automatic weighing machines, CFW, and other weighing instruments that structurally contain vibration sources. ・Since no special mechanical vibration isolation structure is required, cost performance and maintainability are greatly improved. - By using a high-performance digital filter, calibration can be performed in areas where there is vibration. ・High speed (100 times/second) ・High accuracy. - Equipped with an electrical circuit with strong noise countermeasures. ・Modbus-RTU is standard equipment. ・RS-232C is standard equipment. New features

■Equipped with the industry's first non-linear correction function using a high-order formula.

Errors that could not be corrected using conventional linear correction can be corrected using higher-order curves, allowing for more accurate weighing.

■Averaging hold function

The mass data in a certain interval is averaged and held. This is useful when it is difficult to obtain stable mass data even with a high-performance digital filter, or when looking at the average value when the mass is changing.

■User input, user output

The control I/O has 3 input points and 3 output points. It is possible to assign functions to input and output I/O. New user inputs and user outputs can be used by the user for any purpose.

  • Product

    High performance general purpose weighing indicator AD-4410

Share this product


240+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of High performance general purpose weighing indicator AD-4410

Image Part Number Price (excluding tax) Nonlinearity Power supply voltage Dustproof/waterproof specifications Mass Weighing display section Display element Weighing display Display element status display Display element polarity display Status display section Standard accessories Proofreading Maximum display resolution External dimensions Internal resolution Input range Input sensitivity Input noise Input impedance Operating temperature and humidity range Load cell applied voltage Panel cut dimensions Zero adjustment range Zero temperature coefficient Span temperature coefficient A/D conversion method
High performance general purpose weighing indicator AD-4410-Part Number-AD-4410

AD-4410

Available upon quote

0.005% of F.S.

AC100~240V (50/60Hz) Approx. 10VA

When mounted on a panel, display IP65 (use the included packing)

Approximately 800g

Display by switching between net value (NET) or gross value (GROSS)
Display range: 0~999,999d (Minimum scale d can be selected from 1, 2, 5, 10, 50)
Unit: G, kg, t stickers attached

7 segment green LED 6 digits, character height 14.6mm

6 red LEDs

1 green LED

Zero point, stable, gross, net, hold, selection function in operation

Instruction manual, 7-pin DIN connector, 8-pin DIN connector,
Load cell connector, power cable, panel mount packing,
Weighing nameplate, unit sticker

Actual load calibration or digital span calibration without using actual load

99,999d (recommended within 20,000d)

144 (W) ×72 (H) ×124.5 (D) mm (including protrusions, but excluding cables)

Approximately 16,000,000

-35mV~+35mV (-7mV/V~+7mV/V)

0.15µV/d or more (d=minimum scale)

0.3µVp-p or less

10MΩ or more

-10℃~40℃/85%RH or less (no condensation)

DC5V±5%, 120mA, with remote sensing function
Up to 8 350Ω load cells can be connected.
Up to 16 800Ω load cells (LCC07, LCC11, LCC12) can be connected

138×68mm

-35mV~+35mV (-7mV/V~+7mV/V)

±0.02µV/℃ (Typ.)
±0.1µV/℃ (Max.)

±3ppm/℃ (Typ.)
±15ppm/℃ (Max.)

Delta sigma method

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Indicators Products

Other products of A and Day Co., Ltd.

Reviews shown here are reviews of companies.


View more products of A and Day Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

21.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree