All Categories

History

Station nozzle type N2H-N2H□-20A
Station nozzle type N2H-Euseflow Co., Ltd.

Station nozzle type N2H
Euseflow Co., Ltd.

Euseflow Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

1.3hours

Very Fast Response


About This Product

2.0MPa specification/Type NW: 3.0MPa specification.

■Summary

Station nozzles require a short straight pipe section due to the location and number of static pressure holes. (4D×2D) Euseflow's product is a Pitot tube type instantaneous flowmeter. Compared to the general pitot tube type and orifice type, the required straight pipe section is shorter at 4D x 2D. Multiple total pressure holes facing the flow are opened to equalize the total pressure. Similarly, static pressure holes require multiple openings to equalize. Our pitot section has six static pressure holes on the left and right side walls, making it resistant to turbulence. For pipe diameters of 350A or more, one set includes two corner station nozzles and two EF meter nozzles. When using a single nozzle for measurement, due to the limited length of the Pitot tube, the flow of water in the piping is extremely uneven (flowing along the side of the tube rather than the center), making it difficult to obtain accurate flow rates. Measurement may not be possible. Therefore, by installing two nozzles in pairs and facing each other on both sides of the piping, even if the water flow is extremely uneven, it is possible to measure from either side. It becomes. However, both removable and fixed meters can be measured with one meter. Since only the meter body can be removed and attached, it can be easily attached to either side of the nozzle attached to both sides of the piping, so there is no need for two meters.

■Usable pressure range

・1.0MPa specification product = Can be used in the range of 0 to 1.0MPa (10kg/cm2) ・1.6MPa specification product = Can be used in the range of 0 to 1.6MPa (16kg/cm2) ・2.0MPa specification product = Can be used in the range of 0 to 2.0MPa (20kg/cm2) ・3.0MPa specification product = Can be used in the range of 0 to 3.0MPa (30kg/cm2)

■Notes

・In the case of vertical type, piping diameters from 20A to 300A can be used. ・For flow rate detectors with special dimensions, (S) will be displayed at the end of the model number. ・The part (□) in the model number indicates the material: Bronze = C, SUS = U, Brass = Not indicated. (If S is displayed, it is a special dimension product) ・Nozzles with a pipe diameter of 350A or more come in sets of two. ・Do not install it diagonally or directly below side piping. There is no vertical type for piping over 350A. Do not install directly above horizontal piping for 350A or more. *Other model numbers are available.

  • Product

    Station nozzle type N2H

Share this product


530+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Station nozzle type N2H

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Applicable piping
Station nozzle type N2H-Part Number-N2H□-20A

N2H□-20A

Available upon quote

20A

Station nozzle type N2H-Part Number-N2H□-25A

N2H□-25A

Available upon quote

25A

Station nozzle type N2H-Part Number-N2H□-32A

N2H□-32A

Available upon quote

32A

Station nozzle type N2H-Part Number-N2H□-40A

N2H□-40A

Available upon quote

40A

Station nozzle type N2H-Part Number-N2H□-50A

N2H□-50A

Available upon quote

50A

Station nozzle type N2H-Part Number-N2H□-65A

N2H□-65A

Available upon quote

65A

Station nozzle type N2H-Part Number-N2H□-80A

N2H□-80A

Available upon quote

80A

Station nozzle type N2H-Part Number-N2H□-100A

N2H□-100A

Available upon quote

100A

Station nozzle type N2H-Part Number-N2H□-125A

N2H□-125A

Available upon quote

125A

Station nozzle type N2H-Part Number-N2H□-150A

N2H□-150A

Available upon quote

150A

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Instantaneous Flow Meters Products

Other products of Euseflow Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Euseflow Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

1.3hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree